c_meyer/pxt-calliope
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Do a few edits

Browse Source
This commit is contained in:
ganicke
2017-11-20 13:41:35 -08:00
parent 2cfd625349
commit 198ac040ac
4 changed files with 51 additions and 46 deletions
Download Patch File Download Diff File Expand all files Collapse all files

44
docs/projects/milky-monster/make.md
View File

@ -3,7 +3,7 @@
## ~avatar avatar
Turn a piece of cardboard into an milky-monster!
Turn a drink carton into an milky-monster!
![](/static/mb/projects/milky-monster/monsters.jpg)
@ -12,62 +12,66 @@ Turn a piece of cardboard into an milky-monster!
## Duration: ~45 minutes
## Materials
### Recycled
* 1 Milk Carton (with a screwable top cap)
* 1 Small cord - recycle string from a used tea bag
* 1 Paper clip
## Electronics
### Electronics
* 1 @boardname@, battery holder and 2 AAA batteries
* 3 Crocodile clips
* 1 micro servo 9g SG90
* 1 servo clip designed for Milky Monster [download on thingiverse](http://www.thingiverse.com/thing:2185971) (optional). Teachers may prefer to download the classroom pack (16 servo clips).
* 1 micro servo - 9g SG90
* 1 servo clip designed for Milky Monster, download at [thingiverse](http://www.thingiverse.com/thing:2185971) (optional). Teachers may prefer to download the classroom pack (16 servo clips).
## Tools
* Small knive and Scissors that can cut cardboard
### Tools
* Small knife and scissors that can cut cardboard
* Tape (masking, duct tape, and/or packing tape)
* Glue gun
## Step 1: download and cut the template
## Step 1: Download and cut the template
[Download the template](/static/mb/projects/milky-monster/template.pdf) and cut out the template.
https://youtu.be/ipsZuFNgTHM
## Step 2: glue template on milk carton
## Step 2: Glue the template onto the milk carton
Glue the template on the milk carton.
https://youtu.be/2D3WFp29QC4
## Step 3: cut carton
## Step 3: Cut carton
Cut the carton (watch the fingers!)
https://youtu.be/pvC3Tnhe5QU
## Step 4: create mouth
## Step 4: Create the mouth
Cut the cardboard halfways and fold the corners. This will be the mouth of the Milky Monster.
Cut the cardboard halfway and fold the corners. This forms the mouth of the Milky Monster.
https://youtu.be/Yyk1zW4sFoM
## Step 5: extend mouth
## Step 5: Extend the mouth
Use tape to extend the mouth approx 1 cm. Fold one after the other.
https://youtu.be/RWJbqI03wPE
## Step 6: connect cord
## Step 6: Connect cord
Using scissors, create a small whole to insert the cord. Tape the cord on the backsite of the mouth.
Using scissors, create a small whole to insert the cord. Tape the cord on the back side of the mouth.
![](/static/mb/projects/milky-monster/connectmouth.jpg)
Once finished position the mouth in upward position and fix the cord between the cap.
https://youtu.be/Qyndcsmt0AU
## Step 7: create space for @boardname@
## Step 7: Create space for @boardname@
Use scissors to create space at the bottom of the Milky Monster to attach the @boardname@.
@ -79,26 +83,26 @@ Create space to route the cables nicely on back of the milky-monster.
https://youtu.be/BoIRCk769MM
## Step 9: attaching clip to servo
## Step 9: Attaching clip to servo
Use a philips screw driver to mount the servo to the 3D-printed servo clip.
If you don't have the 3D-printed clips available, [download on thingiverse](http://www.thingiverse.com/thing:2185971) , or fix the servo using tyraps or a glue gun.
If you don't have the 3D-printed clips available, download on [thingiverse](http://www.thingiverse.com/thing:2185971), or fix the servo using tie wraps or a glue gun.
https://youtu.be/drKzo5zqvuI
## Step 10: attaching servo to milk button
## Step 10: Attaching servo to milk button
Glue servo to the cap of the milk carton.
https://youtu.be/Ch_vU5LXPeM
## Step 11: cut out hole in cap
## Step 11: Cut out a hole in cap
Cut out a hole in the cap to guide the string to the servo.
https://youtu.be/JKi2Ns8y3nI
## Step 12: connect crocodile clips
## Step 12: Connect crocodile clips
Connect the crocodile clips to the servo.