c_meyer/pxt-calliope
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Do a few edits

Browse Source
This commit is contained in:
ganicke 2017-11-20 13:41:35 -08:00
parent 2cfd625349
commit 198ac040ac
4 changed files with 51 additions and 46 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
docs/projects/milky-monster.md
View File

@ -17,22 +17,22 @@ https://youtu.be/egl3fNAYylk
## Materials ## Materials
## Recycled ### Recycled
* 1 Milk Carton (with a screwable top cap) * 1 Milk Carton (with a screwable top cap)
* 1 Small cord - recylce string from a used tea bag * 1 Small cord - recycle string from a used tea bag
* 1 Paper clip * 1 Paper clip
## Electronics ### Electronics
* 1 @boardname@, battery holder and 2 AAA batteries * 1 @boardname@, battery holder and 2 AAA batteries
* 3 Crocodile clips * 3 Crocodile clips
* 1 micro servo 9g SG90 * 1 micro servo 9g SG90
* 1 servo clip designed for Milky Monster [download on thingiverse](http://www.thingiverse.com/thing:2185971) (optional). Teachers may prefer to download the classroom pack (16 servo clips). * 1 servo clip designed for Milky Monster, download at [thingiverse](http://www.thingiverse.com/thing:2185971) (optional). Teachers may prefer to download the classroom pack (16 servo clips).
## Tools ### Tools
* Small knive and Scissors that can cut cardboard * Small knife and scissors that can cut cardboard
* Tape (masking, duct tape, and/or packing tape) * Tape (masking, duct tape, and/or packing tape)
* Glue gun * Glue gun
@ -40,9 +40,9 @@ https://youtu.be/egl3fNAYylk
## Preparation ## Preparation
* [Equip the microservo with crocodile clips](/device/servo) * Equip the [micro servo](/device/servo) with crocodile clips
* [Get the cut-out template](/static/mb/projects/milky-monster/template.pdf) * Get the [cutout template](/static/mb/projects/milky-monster/template.pdf)
* [Download and 3D-print servo clip designed for MIlky Monster from thingiverse](http://www.thingiverse.com/thing:2185971) (this is optional). Teachers may prefer to download the classroom pack (16 servo clips). * Download and 3D-print the servo clip designed for Milky Monster from [thingiverse](http://www.thingiverse.com/thing:2185971) (this is optional). Teachers may prefer to download the classroom pack (16 servo clips).
## Activities ## Activities
@ -56,5 +56,6 @@ Let's get started!
## ~ ## ~
## about the author ## About the author
This project was contributed by Peter Heldens [@peterheldens](https://twitter.com/peterheldens). You can checkout his [@boardname@ makershow channel on youtube](http://aka.ms/microbit-makershow) for more projects.
This project was contributed by Peter Heldens [@peterheldens](https://twitter.com/peterheldens). You can checkout his [@boardname@ makershow](http://aka.ms/microbit-makershow) channel on youtube for more projects.

24
docs/projects/milky-monster/code.md
View File

@ -9,11 +9,11 @@ Add code to make the Milky Monster move.
## Duration: ~30 minutes ## Duration: ~30 minutes
## Step 1: calibrate servo ## Step 1: Calibrate servo
In order for the Milky Monster to move, the @boardname@ needs to command the servo to go between ``0`` and ``180`` degrees at a certain pace. In the code below: In order for the Milky Monster to move, the @boardname@ needs to command the servo to go between ``0`` and ``180`` degrees at a certain pace. In the code below:
- the user pressed button ``A`` to switch the servo to 180 degrees (to close the mouth of Milky Monster). - Press button ``A`` to switch the servo to 180 degrees (to close the mouth of Milky Monster).
- the user pressed button ``B`` to switch the servo to 0 degrees (to open the mouth of Milky Monster). - Press button ``B`` to switch the servo to 0 degrees (to open the mouth of Milky Monster).
```blocks ```blocks
input.onButtonPressed(Button.A, () => { input.onButtonPressed(Button.A, () => {
@ -28,39 +28,39 @@ basic.showString("calibrate")
``` ```
## Step 2: attach rotor ## Step 2: Attach rotor
The servo should be positioned on 180 degrees **before** attaching the rotor to it. This is to make sure the mouth of the Milky Monster will be closed once the servo reaches 180 degrees. The servo should be positioned at 180 degrees **before** attaching the rotor to it. This will make sure the mouth of the Milky Monster is closed once the servo reaches 180 degrees.
## ~ hint ## ~ hint
You may use a philips scew driver to attach the rotor to the servo. You can use a philips screw driver to attach the rotor to the servo.
## ~ ## ~
https://youtu.be/YZfkMWTeH4o https://youtu.be/YZfkMWTeH4o
## Step 3: check calibration ## Step 3: Check calibration
When the user pressed ``A`` the servo rotor should be in 'up' position. When the user presses ``A`` the servo rotor should be in 'up' position.
https://youtu.be/bAqXEawUsSM https://youtu.be/bAqXEawUsSM
## Step 4: connect cord to rotor ## Step 4: Connect cord to rotor
Connect the cord to the servo rotor while mouth of Milky Monster is **closed**. Connect the cord to the servo rotor while mouth of Milky Monster is **closed**.
https://youtu.be/AWsnwk_iA_A https://youtu.be/AWsnwk_iA_A
## Step 5: connect cables to @boardname@ ## Step 5: Connect cables to @boardname@
Connect cables from @boardname@ to the servo and place the battery. Connect cables from @boardname@ to the servo and place the battery.
https://youtu.be/fAR58GJUZdM https://youtu.be/fAR58GJUZdM
## Step 6: code light sensor ## Step 6: Code light sensor
Code the lightsensor on the @boardname@ to control the servo. Code the light sensor on the @boardname@ to control the servo.
```blocks ```blocks
basic.forever(() => { basic.forever(() => {

6
docs/projects/milky-monster/connect.md
View File

@ -2,14 +2,14 @@
## ~avatar avatar ## ~avatar avatar
Remote control your Milky Monster with another @boardname@ Remotely control your Milky Monster with another @boardname@
## ~ ## ~
## Duration: ~30 minutes ## Duration: ~30 minutes
You will need 2 @boardname@ for this part. By using the radio, we can make the Milky Monster controlled by another @boardname@. You will need 2 @boardname@ for this part. By using the radio, we can control the Milky Monster with another @boardname@.
Download the code below to the @boardname@ on the Milky Monster and another "controller" @boardname@. Whenere A is pressed, the Milky Monster will move once. Download the code below to the @boardname@ that's on the Milky Monster and again to another "controller" @boardname@. Whenever button **A** is pressed, the Milky Monster will move one time.
```blocks ```blocks
radio.onDataPacketReceived(({receivedNumber}) => { radio.onDataPacketReceived(({receivedNumber}) => {

44
docs/projects/milky-monster/make.md
View File

@ -3,7 +3,7 @@
## ~avatar avatar ## ~avatar avatar
Turn a piece of cardboard into an milky-monster! Turn a drink carton into an milky-monster!
![](/static/mb/projects/milky-monster/monsters.jpg) ![](/static/mb/projects/milky-monster/monsters.jpg)
@ -12,62 +12,66 @@ Turn a piece of cardboard into an milky-monster!
## Duration: ~45 minutes ## Duration: ~45 minutes
## Materials ## Materials
### Recycled ### Recycled
* 1 Milk Carton (with a screwable top cap) * 1 Milk Carton (with a screwable top cap)
* 1 Small cord - recycle string from a used tea bag * 1 Small cord - recycle string from a used tea bag
* 1 Paper clip * 1 Paper clip
## Electronics ### Electronics
* 1 @boardname@, battery holder and 2 AAA batteries * 1 @boardname@, battery holder and 2 AAA batteries
* 3 Crocodile clips * 3 Crocodile clips
* 1 micro servo 9g SG90 * 1 micro servo - 9g SG90
* 1 servo clip designed for Milky Monster [download on thingiverse](http://www.thingiverse.com/thing:2185971) (optional). Teachers may prefer to download the classroom pack (16 servo clips). * 1 servo clip designed for Milky Monster, download at [thingiverse](http://www.thingiverse.com/thing:2185971) (optional). Teachers may prefer to download the classroom pack (16 servo clips).
## Tools ### Tools
* Small knive and Scissors that can cut cardboard
* Small knife and scissors that can cut cardboard
* Tape (masking, duct tape, and/or packing tape) * Tape (masking, duct tape, and/or packing tape)
* Glue gun * Glue gun
## Step 1: download and cut the template ## Step 1: Download and cut the template
[Download the template](/static/mb/projects/milky-monster/template.pdf) and cut out the template. [Download the template](/static/mb/projects/milky-monster/template.pdf) and cut out the template.
https://youtu.be/ipsZuFNgTHM https://youtu.be/ipsZuFNgTHM
## Step 2: glue template on milk carton ## Step 2: Glue the template onto the milk carton
Glue the template on the milk carton. Glue the template on the milk carton.
https://youtu.be/2D3WFp29QC4 https://youtu.be/2D3WFp29QC4
## Step 3: cut carton ## Step 3: Cut carton
Cut the carton (watch the fingers!) Cut the carton (watch the fingers!)
https://youtu.be/pvC3Tnhe5QU https://youtu.be/pvC3Tnhe5QU
## Step 4: create mouth ## Step 4: Create the mouth
Cut the cardboard halfways and fold the corners. This will be the mouth of the Milky Monster. Cut the cardboard halfway and fold the corners. This forms the mouth of the Milky Monster.
https://youtu.be/Yyk1zW4sFoM https://youtu.be/Yyk1zW4sFoM
## Step 5: extend mouth ## Step 5: Extend the mouth
Use tape to extend the mouth approx 1 cm. Fold one after the other. Use tape to extend the mouth approx 1 cm. Fold one after the other.
https://youtu.be/RWJbqI03wPE https://youtu.be/RWJbqI03wPE
## Step 6: connect cord ## Step 6: Connect cord
Using scissors, create a small whole to insert the cord. Tape the cord on the backsite of the mouth. Using scissors, create a small whole to insert the cord. Tape the cord on the back side of the mouth.
![](/static/mb/projects/milky-monster/connectmouth.jpg) ![](/static/mb/projects/milky-monster/connectmouth.jpg)
Once finished position the mouth in upward position and fix the cord between the cap. Once finished position the mouth in upward position and fix the cord between the cap.
https://youtu.be/Qyndcsmt0AU https://youtu.be/Qyndcsmt0AU
## Step 7: create space for @boardname@ ## Step 7: Create space for @boardname@
Use scissors to create space at the bottom of the Milky Monster to attach the @boardname@. Use scissors to create space at the bottom of the Milky Monster to attach the @boardname@.
@ -79,26 +83,26 @@ Create space to route the cables nicely on back of the milky-monster.
https://youtu.be/BoIRCk769MM https://youtu.be/BoIRCk769MM
## Step 9: attaching clip to servo ## Step 9: Attaching clip to servo
Use a philips screw driver to mount the servo to the 3D-printed servo clip. Use a philips screw driver to mount the servo to the 3D-printed servo clip.
If you don't have the 3D-printed clips available, [download on thingiverse](http://www.thingiverse.com/thing:2185971) , or fix the servo using tyraps or a glue gun. If you don't have the 3D-printed clips available, download on [thingiverse](http://www.thingiverse.com/thing:2185971), or fix the servo using tie wraps or a glue gun.
https://youtu.be/drKzo5zqvuI https://youtu.be/drKzo5zqvuI
## Step 10: attaching servo to milk button ## Step 10: Attaching servo to milk button
Glue servo to the cap of the milk carton. Glue servo to the cap of the milk carton.
https://youtu.be/Ch_vU5LXPeM https://youtu.be/Ch_vU5LXPeM
## Step 11: cut out hole in cap ## Step 11: Cut out a hole in cap
Cut out a hole in the cap to guide the string to the servo. Cut out a hole in the cap to guide the string to the servo.
https://youtu.be/JKi2Ns8y3nI https://youtu.be/JKi2Ns8y3nI
## Step 12: connect crocodile clips ## Step 12: Connect crocodile clips
Connect the crocodile clips to the servo. Connect the crocodile clips to the servo.