Rename usb 'troubleshooting' paths

This commit is contained in:
ganicke
2017-12-05 14:14:12 -08:00
parent 1955a95130
commit 330e522ebd
11 changed files with 11 additions and 10 deletions

View File

@ -10,7 +10,8 @@ Make sure that your @boardname@ is connected to your computer with a micro USB c
If you can't see the drive:
* **Make sure that the USB cable is working.** Does the cable work on another computer? If not, find a different cable to use. Some cables may only provide a power connection and don't actually transfer data.
* **Make sure that the USB cable is working.**
>Does the cable work on another computer? If not, find a different cable to use. Some cables may only provide a power connection and don't actually transfer data.
* **Try another USB port on your computer.**
Is the cable good but you still can't see the **MICROBIT** drive? Hmm, you might have a problem with your @boardname@. Try the additional steps described in the [fault finding](https://support.microbit.org/support/solutions/articles/19000024000-fault-finding-with-a-micro-bit) page at microbit.org. If this doesn't help, you can create a [support ticket](https://support.microbit.org/support/tickets/new) to notify the Micro:bit Foundation of the problem.
@ -31,7 +32,7 @@ If the version is **0234**, you **NEED** to update the [firmware](/device/firmwa
1. Put your @boardname@ into **MAINTENANCE Mode**. To do this, unplug the USB cable from the @boardname@ and then re-connect the USB cable while you hold down the reset button. Once you insert the cable, you can release the reset button. You should now see a **MAINTENANCE** drive instead of the **MICROBIT** drive like before. Also, a yellow LED light will stay on next to the reset button.
![MAINTENANCE gesture](/static/mb/device/maintenance.gif)
2. **[Download the firmware .hex file](https://support.microbit.org/helpdesk/attachments/19008095092)**
3. Drag and drop that file into the **MAINTENANCE** drive.
3. Drag and drop that file onto the **MAINTENANCE** drive.
4. The yellow LED will flash while the `HEX` file is copying. When the copy finishes, the LED will go off and the @boardname@ resets. The **MAINTENANCE** drive now changes back to **MICROBIT**.
5. The upgrade is complete! You can open the **DETAILS.TXT** file to check and see that the firmware version changed to the match the version of the `HEX` file you copied.