c_meyer/pxt-calliope
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

upgraded download instructions to use "save as"

Browse Source
This commit is contained in:
Peli de Halleux
2017-03-24 07:39:59 -07:00
parent 62b4168531
commit 684646d3de
8 changed files with 37 additions and 92 deletions
Download Patch File Download Diff File Expand all files Collapse all files

32
docs/device/usb/windows-ie.md
View File

@ -8,14 +8,8 @@ The basic steps are:
1. Connect your micro:bit to your computer via USB
2. Click **Download** and download the `.hex` file
3. Copy the `.hex` file from your computer onto the micro:bit drive
### ~hint
You can use the [micro:bit uploader](/uploader) to automatically deploy ``.hex`` files to your micro:bit!
![](/static/uploader/tooltip.png)
### ~
3. **Click the down arrow next to Save** in the bottom bar and select **Save As**.
4. In the save dialog, save the `.hex` file into the MICROBIT drive
## Requirements
@ -48,32 +42,18 @@ it appears as a new drive under Devices.
whether you are using a Windows computer or a Mac
A message will appear at the bottom of the browser asking what you want to do
with the file. Click **Save**:
with the file. Click **on the arrow next to Save** and click **Save As**
![](/static/mb/device/usb-windows-ie11-1.png)
Then click **Open folder** and drag and drop the file from your Downloads to
your `MICROBIT` drive.
![](/static/mb/device/usb-windows-ie11-2.png)
In the save dialog, save the ``.hex`` file to the MICROBIT drive.
## Step 3: Transfer the file to your micro:bit
* Once you've found the folder containing your `.hex` file, drag and drop it
onto your `MICROBIT` drive
* If you're using Windows, you can use **Send to** as described below
* The LED on the back of your micro:bit flashes during the transfer (which
should only take a few seconds).
* Once transferred, the code will run automatically on your micro:bit. To rerun
your program, press the reset button on the back of your micro:bit. The reset
* Once transferred, the code will run automatically on your @boardname@. To rerun
your program, press the reset button on the back of your @boardname@. The reset
button automatically runs the newest file on the micro:bit.
**Send to**: If you're using Windows you use *Send to* in File Explorer:
In File Explorer, right-click on the hex file (created in Step 2 above), choose **Send to**, and then **MICROBIT**.
![](/static/mb/device/usb-windows-sendto.jpg)
By copying the script onto the `MICROBIT` drive, you have programmed it into the
flash memory on the micro:bit, which means even after you unplug the micro:bit,
your program will still run if the micro:bit is powered by battery.