upgraded download instructions to use "save as"

clients/macuploader/README.md

@@ -1,11 +1,11 @@
-# micro:bit uploader for OS X
+# @boardname@ uploader for OS X
 
 ![](Microbit Uploader/Assets.xcassets/AppIcon.appiconset/icon_256x256.png)
 
 This project is a clone of the [Windows
 uploader](https://pxt.microbit.org/uploader), but for OS X. Once launched,
 the app runs in your menu bar and will automatically deploy any HEX files to
-your `micro:bit`. Like the Windows version, it is compatible with any browser
+your `@boardname@`. Like the Windows version, it is compatible with any browser
 that can run [pxt.microbit.org](http://pxt.microbit.org).
 
 ## Install the built version

docs/device/crocodile-clips.md

@@ -34,7 +34,8 @@ Adding a little tape helps keeping the crocodile clips in place.
 ## Example: on pin pressed with random numbers
 
 This example displays a random number every time the crocodile clip holds  `GND` then connects and disconnects the `P0` pin. 
-Each time the crocodile clip is firmly connected and disconnected from pin `P0`, the micro:bit will return a random Number between 0 and the parameter limit.
+Each time the crocodile clip is firmly connected and disconnected from pin `P0`, 
+the @boardname@ will return a random Number between 0 and the parameter limit.
 
 ```blocks
 input.onPinPressed(TouchPin.P0, () => {

docs/device/foil-circuits.md

@@ -4,20 +4,20 @@ The large holes at the bottom of the board are designed to attach alligator/croc
 to create electrical circuit with other components.
 
 If you do not have crocodile clips at hand, dyou can use wires or even Aluminium foil to acheive the same result.
-We will show you how to connect the micro:bit to headphones using Alumunium foil and tape.
+We will show you how to connect the @boardname@ to headphones using Alumunium foil and tape.
 
 https://youtu.be/mhXYyPuvpz0
 
 ### Materials
 
-* micro:bit and battery pack (you can also power it via USB)
+* @boardname@ and battery pack (you can also power it via USB)
 * a small piece of cardboard
 * Aluminium foil
 * tape
 
 ### Assembly instructions
 
-Tape the micro:bit and battery pack to the card board. Make sure to remove the batteries while you are building your circuit.
+Tape the @boardname@ and battery pack to the card board. Make sure to remove the batteries while you are building your circuit.
 
 ![](/static/mb/device/croc-clips/microbitattached.jpg)
 
@@ -49,4 +49,4 @@ Tape the second wire on the head of the jack connector.
 
 ## See also
 
-[micro:bit pins](/device/pins)
+[@boardname@ pins](/device/pins)

docs/device/usb.md

@@ -6,9 +6,16 @@ can **compile** it and run it on your micro:bit.
 
 The basic steps are:
 
-1. Connect your micro:bit to your computer via USB
+1. Connect your @boardname@ to your computer via USB
-2. Click **Download** and download the `.hex` file
+2. Click **Download** to download the `.hex` file
-3. Copy the `.hex` file from your computer onto the micro:bit drive
+3. Move the `.hex` file from your computer onto the MICROBIT drive
+
+### ~ hint
+
+In Edge, Internet Explorer and Firefox, you can click on the **Save As** button on the bottom bar and save the ``.hex`` file
+directly into the MICROBIT drive!
+
+### ~
 
 ![](/static/mb/device/usb-thin.jpg)
 

docs/device/usb/windows-edge.md

@@ -8,16 +8,9 @@ can **compile** it and run it on your micro:bit.
 
 The basic steps are:
 
-1. Connect your micro:bit to your computer via USB
+1. Connect your @boardname@ to your computer via USB
-2. Click **Download** and download the `.hex` file
+2. Click **Download** to download the `.hex` file
-3. Copy the `.hex` file from your computer onto the micro:bit drive
+3. Click the **Save As** button in the bottom bar and save the `.hex` file into the MICROBIT drive
-
-### ~hint
-
-You can use the [micro:bit uploader](/uploader) to automatically deploy ``.hex`` files to your micro:bit!
-![](/static/uploader/tooltip.png)
-
-### ~
 
 ## Requirements
 
@@ -50,38 +43,23 @@ it appears as a new drive under Devices.
    whether you are using a Windows computer or a Mac
 
 A message will appear at the bottom of the browser asking what you want to do
-with the file. Click **Save**:
+with the file. 
 
-![](/static/mb/device/usb-windows-edge-1.png)
+4. Click **Save As**
-
+5. Save the ``.hex`` file into the **MICROBIT** drive
-Then click **Open folder** and drag and drop the file from your Downloads to
-your `MICROBIT` drive.
-
-![](/static/mb/device/usb-windows-edge-2.png)
 
 ## Step 3: Transfer the file to your micro:bit
 
-* Once you've found the folder containing your `.hex` file, drag and drop it
-    onto your `MICROBIT` drive
-* If you're using Windows, you can use **Send to** as described below 
 * The LED on the back of your micro:bit flashes during the transfer (which 
     should only take a few seconds).
-* Once transferred, the code will run automatically on your micro:bit. To rerun
+* Once transferred, the code will run automatically on your @boardname@. To rerun
-   your program, press the reset button on the back of your micro:bit. The reset 
+   your program, press the reset button on the back of your @boardname@. The reset 
    button automatically runs the newest file on the micro:bit.
 
-In File Explorer, right-click on the hex file (created in Step 2 above), choose **Send to**, and then **MICROBIT**.
-
-![](/static/mb/device/usb-windows-sendto.jpg)
-
 By copying the script onto the `MICROBIT` drive, you have programmed it into the
 flash memory on the micro:bit, which means even after you unplug the micro:bit,
 your program will still run if the micro:bit is powered by battery.
 
-If you want to save time, you can use the [micro:bit uploader](/uploader) to
-automatically deploy hex files to your micro:bit. It works on Windows and is
-compatible with any browser.
-
 ### ~hint
 
 Transfer not working? See some [troubleshooting tips](/device/usb/troubleshooting).

docs/device/usb/windows-firefox.md

@@ -10,14 +10,7 @@ The basic steps are:
 
 1. Connect your micro:bit to your computer via USB
 2. Click **Download** and download the `.hex` file
-3. Copy the `.hex` file from your computer onto the micro:bit drive
+3. Click the **Save As** button and save the `.hex` file into the MICROBIT drive
-
-### ~hint
-
-You can use the [micro:bit uploader](/uploader) to automatically deploy ``.hex`` files to your micro:bit!
-![](/static/uploader/tooltip.png)
-
-### ~
 
 ## Requirements
 
@@ -50,31 +43,16 @@ it appears as a new drive under Devices.
    whether you are using a Windows computer or a Mac
 
 A window will appear asking whether you want to save or open the `.hex` file.
-Select **Save File** and then select **OK**.
+Select **Save As** and save it to the MICROBIT drive.
 
-![](/static/mb/device/usb-windows-firefox-1.png)
-
-The file will then appear in your downloads in the top right of your browser.
-Click the **folder icon** next to the filename to open it in Windows Explorer.
-
-![](/static/mb/device/usb-windows-firefox-2.jpg)
-
-Drag and drop the `.hex` file from the download folder onto the `MICROBIT` drive.
 ## Step 3: Transfer the file to your micro:bit
 
-* Once you've found the folder containing your `.hex` file, drag and drop it
-    onto your `MICROBIT` drive
-* If you're using Windows, you can use **Send to** as described below 
 * The LED on the back of your micro:bit flashes during the transfer (which 
     should only take a few seconds).
-* Once transferred, the code will run automatically on your micro:bit. To rerun
+* Once transferred, the code will run automatically on your @boardname@. To rerun
-   your program, press the reset button on the back of your micro:bit. The reset 
+   your program, press the reset button on the back of your @boardname@. The reset 
    button automatically runs the newest file on the micro:bit.
 
-In File Explorer, right-click on the hex file (created in Step 2 above), choose **Send to**, and then **MICROBIT**.
-
-![](/static/mb/device/usb-windows-sendto.jpg)
-
 By copying the script onto the `MICROBIT` drive, you have programmed it into the
 flash memory on the micro:bit, which means even after you unplug the micro:bit,
 your program will still run if the micro:bit is powered by battery.

docs/device/usb/windows-ie.md

@@ -8,14 +8,8 @@ The basic steps are:
 
 1. Connect your micro:bit to your computer via USB
 2. Click **Download** and download the `.hex` file
-3. Copy the `.hex` file from your computer onto the micro:bit drive
+3. **Click the down arrow next to Save**  in the bottom bar and select **Save As**.
-
+4. In the save dialog, save the `.hex` file into the MICROBIT drive
-### ~hint
-
-You can use the [micro:bit uploader](/uploader) to automatically deploy ``.hex`` files to your micro:bit!
-![](/static/uploader/tooltip.png)
-
-### ~
 
 ## Requirements
 
@@ -48,32 +42,18 @@ it appears as a new drive under Devices.
    whether you are using a Windows computer or a Mac
 
 A message will appear at the bottom of the browser asking what you want to do
-with the file. Click **Save**:
+with the file. Click **on the arrow next to Save** and click **Save As**
 
-![](/static/mb/device/usb-windows-ie11-1.png)
+In the save dialog, save the ``.hex`` file to the MICROBIT drive.
-
-Then click **Open folder** and drag and drop the file from your Downloads to
-your `MICROBIT` drive.
-
-![](/static/mb/device/usb-windows-ie11-2.png)
 
 ## Step 3: Transfer the file to your micro:bit
 
-* Once you've found the folder containing your `.hex` file, drag and drop it
-    onto your `MICROBIT` drive
-* If you're using Windows, you can use **Send to** as described below 
 * The LED on the back of your micro:bit flashes during the transfer (which 
     should only take a few seconds).
-* Once transferred, the code will run automatically on your micro:bit. To rerun
+* Once transferred, the code will run automatically on your @boardname@. To rerun
-   your program, press the reset button on the back of your micro:bit. The reset 
+   your program, press the reset button on the back of your @boardname@. The reset 
    button automatically runs the newest file on the micro:bit.
 
-**Send to**: If you're using Windows you use *Send to* in File Explorer:
-
-In File Explorer, right-click on the hex file (created in Step 2 above), choose **Send to**, and then **MICROBIT**.
-
-![](/static/mb/device/usb-windows-sendto.jpg)
-
 By copying the script onto the `MICROBIT` drive, you have programmed it into the
 flash memory on the micro:bit, which means even after you unplug the micro:bit,
 your program will still run if the micro:bit is powered by battery.

pxtarget.json

@@ -217,6 +217,7 @@
         "exampleGallery": "examples",
         "crowdinProject": "kindscript",
         "boardName": "micro:bit",
+        "driveDisplayName": "MICROBIT",
         "sideDoc": "tutorials/getting-started",
         "feedbackUrl": "https://www.research.net/r/MCmicro",
         "browserSupport": [