update radio ref for deprecated pages (#1829)

docs/reference/radio.md

@@ -1,6 +1,6 @@
 # Radio
 
-Communicate data using radio packets
+Send and receive data using radio packets.
 
 ```cards
 radio.sendNumber(0);
@@ -9,11 +9,16 @@ radio.sendString("");
 radio.onReceivedNumber(function (receivedNumber) { });
 radio.onReceivedValue(function (name, value) { });
 radio.onReceivedString(function (receivedString) { });
+radio.receivedPacket(RadioPacketProperty.SignalStrength)
 radio.setGroup(0);
+```
+
+## Advanced
+
+```cards
+radio.writeReceivedPacketToSerial();
 radio.setTransmitPower(7);
 radio.setTransmitSerialNumber(false);
-radio.writeReceivedPacketToSerial();
-radio.sendBuffer(null);
 radio.raiseEvent(0, 0);
 ```
 
@@ -23,15 +28,15 @@ radio
 
 ## See Also
 
-[sendNumber](/reference/radio/send-number),
-[sendValue](/reference/radio/send-value),
-[sendString](/reference/radio/send-string),
-[sendBuffer](/reference/radio/send-buffer),
-[onReceivedNumber](/reference/radio/on-received-number),
-[onReceivedValue](/reference/radio/on-received-value),
-[onReceivedString](/reference/radio/on-received-string),
-[setGroup](/reference/radio/set-group),
-[setTransmitPower](/reference/radio/set-transmit-power),
-[setTransmitSerialNumber](/reference/radio/set-transmit-serial-number),
-[writeReceivedPacketToSerial](/reference/radio/write-received-packet-to-serial),
-[raiseEvent](/reference/radio/raise-event)
+[send number](/reference/radio/send-number),
+[send value](/reference/radio/send-value),
+[send string](/reference/radio/send-string),
+[on received number](/reference/radio/on-received-number),
+[on received value](/reference/radio/on-received-value),
+[on received string](/reference/radio/on-received-string),
+[received packet](/reference/radio/received-packet),
+[set group](/reference/radio/set-group),
+[set transmit power](/reference/radio/set-transmit-power),
+[set transmit serial number](/reference/radio/set-transmit-serial-number),
+[write received packet to serial](/reference/radio/write-received-packet-to-serial),
+[raise event](/reference/radio/raise-event)

docs/reference/radio/on-data-packet-received.md

@@ -1,8 +1,7 @@
 # On Data Packet Received
 
 Run part of a program when the @boardname@ receives a
-[number](/types/number) or [string](/types/string) over ``radio``.
-
+[number](/types/number) or [string](/types/string) over radio.
 
 ```sig
 radio.onDataPacketReceived(({receivedNumber, receivedString, time, serial, signal}) => { });
@@ -10,6 +9,18 @@ radio.onDataPacketReceived(({receivedNumber, receivedString, time, serial, signa
 
 ## ~ hint
 
+**Deprecated**
+
+This API has been deprecated!
+
+* To receive a [string](/types/string) use [on received string](/reference/radio/on-received-string) instead.
+* To receive a [number](/types/number) use [on received number](/reference/radio/on-received-number) instead.
+* To receive a name-value pair use [on received value](/reference/radio/on-received-value) instead.
+
+## ~
+
+## ~hint
+
 To add or remove the parts of the packet from the block, try clicking the blue gear in the corner!
 
 ## ~

docs/reference/radio/on-data-received.md

@@ -1,10 +1,19 @@
-# On Data Received
-
-> Note: This API has been deprecated! Use [on received number](/reference/radio/on-received-number) instead.
+# on Data Received
 
 Run part of a program when the @boardname@ receives a
-[number](/types/number) or [string](/types/string) over ``radio``.
+[number](/types/number) or [string](/types/string) over radio.
 
+```sig
+radio.onDataReceived(() => { });
+```
+
+## ~ hint
+
+**Deprecated**
+
+This API has been deprecated! Use [on received number](/reference/radio/on-received-number) instead.
+
+## ~
 
 ```sig
 radio.onDataReceived(() => { });

docs/reference/radio/on-received-number.md

@@ -55,6 +55,7 @@ The radio set group might need to be set, synchronized, before the radio events
 ## See also
 
 [on received string](/reference/radio/on-received-string),
+[received packet](/reference/radio/received-packet),
 [send number](/reference/radio/send-number),
 [send string](/reference/radio/send-string),
 [send value](/reference/radio/send-value),

docs/reference/radio/on-received-string.md

@@ -32,6 +32,7 @@ The radio set group might need to be set, synchronized, before the radio events
 ## See also
 
 [on received number](/reference/radio/on-received-number),
+[received packet](/reference/radio/received-packet),
 [send number](/reference/radio/send-number),
 [send string](/reference/radio/send-string),
 [send value](/reference/radio/send-value),

docs/reference/radio/on-received-value.md

@@ -38,6 +38,7 @@ The radio set group might need to be set, synchronized , before the radio events
 ## See also
 
 [on received number](/reference/radio/on-received-number),
+[received packet](/reference/radio/received-packet),
 [send number](/reference/radio/send-number),
 [send string](/reference/radio/send-string),
 [send value](/reference/radio/send-value),

docs/reference/radio/raise-event.md

@@ -1,4 +1,4 @@
-# Raise Event
+# raise Event
 
 Sends an event over radio to be raised in the event bus of other @boardname@. 
 

docs/reference/radio/receive-number.md

@@ -1,13 +1,19 @@
-# Receive Number
+# receive Number
 
-> Note: This API has been deprecated! Use [on received number](/reference/radio/on-received-number) instead.
-
-Receives the next number sent by a @boardname@ in the same ``radio`` group.
+Receive the next number sent by a @boardname@ in the same ``radio`` group.
 
 ```sig
 radio.receiveNumber();
 ```
 
+## ~ hint
+
+**Deprecated**
+
+This API has been deprecated! Use [on received number](/reference/radio/on-received-number) instead.
+
+## ~
+
 ## Returns
 
 * the first  [number](/types/number) that the @boardname@ received. If it did not receive any numbers, this function will return `0`.

docs/reference/radio/receive-string.md

@@ -1,12 +1,17 @@
-# Receive String
+# receive String
 
-> Note: This API has been deprecated! Use [on received string](/reference/radio/on-received-string) instead.
-
-Find the next string sent by `radio` from another @boardname@.
+Find the next string sent by radio from another @boardname@.
 
 ```sig
 radio.receiveString()
 ```
+## ~ hint
+
+**Deprecated**
+
+This API has been deprecated! Use [on received string](/reference/radio/on-received-string) instead.
+
+## ~
 
 ## Returns
 

docs/reference/radio/received-packet.md

@@ -1,4 +1,4 @@
-# Received Packet Property
+# received Packet
 
 Get one of the properties from the last received radio packet.
 
@@ -6,6 +6,8 @@ Get one of the properties from the last received radio packet.
 radio.receivedPacket(RadioPacketProperty.SignalStrength)
 ```
 
+In addition to a [number](types/number), [string](/types/string), or name-value pair, the packet received also contains other information about the transmission of the packet. You can get this additional information by selecting a property from the packet.
+
 ## Parameters
 
 * **type**: the property type to get from the packet. These are:
@@ -15,7 +17,10 @@ radio.receivedPacket(RadioPacketProperty.SignalStrength)
 
 ## Returns
 
-* a [number](/types/number) that is the property selected in the **type** parameter.
+* a [number](/types/number) that is the property selected in the **type** parameter:
+>* ``signal strength``: the value ranges from `-128` to `-42` (`-128` means a weak signal and `-42` means a strong one.)
+>* ``serial number``: the value is the serial number of the board sending the packet.
+>* ``time``: the value is the system time, in microseconds, of the sender at the time when the packet was sent.
 
 ## Example
 

docs/reference/radio/received-signal-strength.md

@@ -1,6 +1,18 @@
-# Received Signal Strength
+# received Signal Strength
 
-> Note: This API has been deprecated! Use [on data packet received](/reference/radio/on-data-packet-received) instead.
+Find how strong the radio signal is.
+
+```sig
+radio.receivedSignalStrength();
+```
+
+## ~ hint
+
+**Deprecated**
+
+This API has been deprecated! Use [received packet](/reference/radio/received-packet) instead.
+
+## ~
 
 Find how strong the ``radio`` signal is, from `-128` to `-42`.
 (`-128` means a weak signal and `-42` means a strong one.)
@@ -10,9 +22,7 @@ the last time it ran the
 [on received number](/reference/radio/on-received-number) function. That means
 it needs to run **receive number** first.
 
-```sig
-radio.receivedSignalStrength();
-```
+
 
 ## Returns
 

docs/reference/radio/send-number.md

@@ -11,7 +11,9 @@ radio.sendNumber(0);
 * **value**: a [number](/types/number) to send.
 
 
-## Example: Broadcasting acceleration
+## Examples
+
+### Broadcasting acceleration
 
 This example broadcasts the value of your @boardname@'s ``acceleration``
 in the `x` direction (left and right) to other @boardname@s.  This kind
@@ -23,7 +25,7 @@ input.onButtonPressed(Button.A, () => {
 })
 ```
 
-## Light level sender
+### Light level sender
 
 This example broadcasts the level of the light around it.
 You can do some interesting things with it if you use it along with the

docs/reference/radio/send-string.md

@@ -9,7 +9,7 @@ radio.sendString("Hello!")
 
 ## Parameters
 
-* `msg` is a [string](/types/string) to send by radio.
+* **msg**: a [string](/types/string) to send by radio.
 
 
 ## Example: Two-way radio

docs/reference/radio/send-value.md

@@ -9,8 +9,8 @@ radio.sendValue("name", 0);
 
 ## Parameters
 
-* ``name`` is a [string](/types/string) to send by radio
-* ``value`` a [number](/types/number) to send by radio
+* **name**: a [string](/types/string) that is the name of the value to send.
+* **value**: a [number](/types/number) that is the value to send.
 
 ## Example: Broadcasting acceleration
 

docs/reference/radio/set-group.md

@@ -1,7 +1,13 @@
 # set Group
 
 Make a program have the group ID you tell it for sending and receiving
-with ``radio``.  A group is like a cable channel (a @boardname@ can only
+with radio.
+
+```sig
+radio.setGroup(0);
+```
+
+A group is like a cable channel (a @boardname@ can only
 send or receive in one group at a time). A group ID is like the cable
 channel number.
 
@@ -10,10 +16,6 @@ function, it will figure out its own group ID by itself.  If you load
 the very same program onto two different @boardname@s, they will be able
 to talk to each other because they will have the same group ID.
 
-```sig
-radio.setGroup(0);
-```
-
 ## Parameters
 
 * **id**: a [number](/types/number) from ``0`` to ``255``.

docs/reference/radio/set-transmit-power.md

@@ -1,16 +1,18 @@
 # set Transmit Power
 
-Make the ``radio`` signal of the @boardname@ stronger or weaker. It can be as weak as `0` and as strong as `7`. Default is ``6``.
+Make the ``radio`` signal of the @boardname@ stronger or weaker.
+
+```sig
+radio.setTransmitPower(7);
+```
+
+The signal can be as weak as `0` and as strong as `7`. Default is ``6``.
 
 The scientific name for the strength of the ``radio`` signal is
 **dBm**, or **decibel-milliwatts**. A signal strength of `0`
 can be measured as -30 dBm, and a strength of `7` can be
 measured as +4 dBm.
 
-```sig
-radio.setTransmitPower(7);
-```
-
 ## Range
 
 If your @boardname@ is sending with a strength of `7`, and you are in

docs/reference/radio/set-transmit-serial-number.md

@@ -1,6 +1,6 @@
 # set Transmit Serial Number
 
-Make the ``radio`` packet embed the board serial number with each packet of data.
+Make the radio packet embed the board serial number with each packet of data.
 
 ```sig
 radio.setTransmitSerialNumber(true);
@@ -8,7 +8,7 @@ radio.setTransmitSerialNumber(true);
 
 ## Parameters
 
-* ``transmit`` is a [boolean](/types/boolean) that, when ``true``, means that the board serial number is included in each transmitted packet. If ``false``, the serial number value is set to `0`.
+* **transmit**: a [boolean](/types/boolean) that, when ``true``, means that the board serial number is included in each transmitted packet. If ``false``, the serial number value is set to `0`.
 
 ## Example
 

docs/reference/radio/write-received-packet-to-serial.md

@@ -1,13 +1,14 @@
-# Write Received Packet To Serial
+# write Received Packet To Serial
 
 Writes the last packet received by the ``radio`` to serial in JSON format.
-Should be called within a callback to
-[on data packet received](/reference/radio/on-data-packet-received).
 
 ```sig
 radio.writeReceivedPacketToSerial();
 ```
 
+This should be called within a callback to
+[on data packet received](/reference/radio/on-data-packet-received).
+
 ## Data received format
 
 The format for received data when these send functions are used:

docs/reference/radio/write-value-to-serial.md

@@ -1,13 +1,19 @@
-# Write Value To Serial
+# write Value To Serial
 
-> Note: This API has been deprecated! Use [write received packet to serial](/reference/radio/write-received-packet-to-serial) instead.
-
-Writes the data received by ``radio`` to serial in JSON format.
+Write the data received by radio to serial in JSON format.
 
 ```sig
 radio.writeValueToSerial();
 ```
 
+## ~ hint
+
+**Deprecated**
+
+This API has been deprecated! Use [write received packet to serial](/reference/radio/write-received-packet-to-serial) instead.
+
+## ~
+
 ## Data received format
 
 The format for received data printed to serial is as follows: