diff --git a/docs/lessons/charting/activity.md b/docs/lessons/charting/activity.md
index fb60ee2c..b767a0f0 100644
--- a/docs/lessons/charting/activity.md
+++ b/docs/lessons/charting/activity.md
@@ -2,20 +2,17 @@
 
 Measure the acceleration on the micro:bit in the "z" direction. 
 
-### ~avatar 
+### ~avatar avatar
 
-```
 Welcome! This activity will teach how to use the 1st micro:bit to chart the second micro:bit's acceleration in the "x" direction. Let's get started!
 
-```
-
-
+### ~
 Let's measure `acceleration (mg)` and then `send number`. `Acceleration` is measured in **milli-gravities**, so a value of -1000 is equivalent to -1g or -9.81m/s^2. We will be able to get the acceleration value (g-force), in the specified "x" dimension. `Send number` will broadcast a number data packet to other micro:bits connected via radio.
 
 ```blocks
 radio.sendNumber(input.acceleration(Dimension.X));
 ```
-
+### ~
 We want to display the acceleration forever. In order to do so, we need a `forever` loop. A forever loop will repeat code in the background forever.
 
 ```blocks
@@ -25,7 +22,7 @@ basic.forever(() => {
 
 
 ```
-
+### ~
 We want to register code to run when a packet is received over radio. We can implement this code by adding `on data received`.
 
 ```blocks
@@ -36,7 +33,7 @@ radio.onDataReceived(() => {
     
 })
 ```
-
+### ~
 Finally, we want to chart the acceleration. So we must first implement `plot bar graph`. `Plot Bar Graph` will display a vertical bar graph based on the value and high value. In order to transfer the receive the number from the 1st micro:bit, we must implement `receive number` to constantly display a vertical bar graph based on the value. Remember, the value will equal to the micro:bit's acceleration in the "x" direction.
 
 ```blocks
@@ -48,21 +45,25 @@ radio.onDataReceived(() => {
 })
 
 ```
-
+### ~
 Notice that moving the micro:bit the farthest direction in the x direction will be -1023 on the charting beneath the simulator. The second observation will be that the LEDs will be full brightness on the 2nd micro:bit. There is a single LED turned on with the 1st micro:bit. Additionally, the graphs will reflect 0 acceleation for the 1st micro:bit. In this scenario, if you are adjusting the acceleration in the simualator, you are also changing your chart that will be produced.  
 
 ![](/static/mb/acc.png)
 
+### ~
 NOTE: The colors of the charts reflect the color of the micro:bit simulator. In this instance, the micro:bits are blue and green. So the colors of the line graphs reflect the colors of the micro:bit
  
+ ### ~
 After running this simulatation several seconds by moving the micro:bit side to side in the x direction, you are ready to graph or chart the accceleration of the micro:bit.  We want a printout of our acceleration on Excel. We will graph the fluctuating acceleration of the simulation experiment. 
 
 ![](/static/mb/acc2.png)
 
+### ~
 Finally, you must open the Excel CSV file by clicking on the data.xls file that was downloaded to Downloads Folder. 
 
 ![](/static/mb/csv.png)
 
+### ~
 Have fun reviewing your simulation and analyze the acceleration by chart the Excel data using Excel.
 
 * Connect the first micro:bit to your computer using your USB cable and run the charting script on it.