Changes to the Beta (#115)

* fixes for beta

- hide blocks without function
- digital Pin selection bring P0 in first position
- add compass block to end confusion about "basic.showArrow(ArrowNames.North)"
- add approved repos
- add and sort preffered repos
- add prefferedPackages
- disable webUSB
- disable parts
- remove mobileSafariDownloadProtocol
- update socialOptions

* remove `preferredPackages` from `pxtarget`

Co-authored-by: Juri <gitkraken@juriwolf.de>

libs/core/_locales/core-jsdoc-strings.json

@@ -396,6 +396,8 @@
   "images": "Creation, manipulation and display of LED images.",
   "images.createBigImage": "Creates an image with 2 frames.",
   "images.createImage": "Creates an image that fits on the LED screen.",
+  "images.showCompass": "Draws needle on the screen which always points to north",
+  "images.showCompass|param|interval": "the amount of time (milliseconds) to show the needle. Default is 600.",
   "input": "Events and data from sensors",
   "input.acceleration": "Get the acceleration value in milli-gravitys (when the board is laying flat with the screen up, x=0, y=0 and z=-1024)",
   "input.acceleration|param|dimension": "x, y, or z dimension, eg: Dimension.X",
@@ -553,16 +555,16 @@
   "pins.analogPitch|param|frequency": "frequency to modulate in Hz.",
   "pins.analogPitch|param|ms": "duration of the pitch in milli seconds.",
   "pins.analogReadPin": "Read the connector value as analog, that is, as a value comprised between 0 and 1023.",
-  "pins.analogReadPin|param|name": "pin to write to, eg: AnalogPin.P0",
+  "pins.analogReadPin|param|name": "pin to write to, eg: AnalogPin.P1",
   "pins.analogSetPeriod": "Configure the pulse-width modulation (PWM) period of the analog output in microseconds.\nIf this pin is not configured as an analog output (using `analog write pin`), the operation has no effect.",
   "pins.analogSetPeriod|param|micros": "period in micro seconds. eg:20000",
-  "pins.analogSetPeriod|param|name": "analog pin to set period to, eg: AnalogPin.P0",
+  "pins.analogSetPeriod|param|name": "analog pin to set period to, eg: AnalogPin.P1",
   "pins.analogSetPitchPin": "Set the pin used when using analog pitch or music.",
   "pins.analogSetPitchPin|param|name": "pin to modulate pitch from",
   "pins.analogSetPitchVolume": "Sets the volume on the pitch pin",
   "pins.analogSetPitchVolume|param|volume": "the intensity of the sound from 0..255",
   "pins.analogWritePin": "Set the connector value as analog. Value must be comprised between 0 and 1023.",
-  "pins.analogWritePin|param|name": "pin name to write to, eg: AnalogPin.P0",
+  "pins.analogWritePin|param|name": "pin name to write to, eg: AnalogPin.P1",
   "pins.analogWritePin|param|value": "value to write to the pin between ``0`` and ``1023``. eg:1023,0",
   "pins.createBuffer": "Create a new zero-initialized buffer.",
   "pins.createBuffer|param|size": "number of bytes in the buffer",
@@ -594,7 +596,7 @@
   "pins.servoSetPulse|param|micros": "pulse duration in micro seconds, eg:1500",
   "pins.servoSetPulse|param|name": "pin name",
   "pins.servoWritePin": "Write a value to the servo, controlling the shaft accordingly. On a standard servo, this will set the angle of the shaft (in degrees), moving the shaft to that orientation. On a continuous rotation servo, this will set the speed of the servo (with ``0`` being full-speed in one direction, ``180`` being full speed in the other, and a value near ``90`` being no movement).",
-  "pins.servoWritePin|param|name": "pin to write to, eg: AnalogPin.P0",
+  "pins.servoWritePin|param|name": "pin to write to, eg: AnalogPin.P1",
   "pins.servoWritePin|param|value": "angle or rotation speed, eg:180,90,0",
   "pins.setEvents": "Configure the events emitted by this pin. Events can be subscribed to\nusing ``control.onEvent()``.",
   "pins.setEvents|param|name": "pin to set the event mode on, eg: DigitalPin.P0",

libs/core/_locales/core-strings.json

@@ -310,6 +310,7 @@
   "images.createBigImage|block": "create big image",
   "images.createImage|block": "create image",
   "images.iconImage|block": "icon image %i",
+  "images.showCompass|block": "show compass needle for $interval|ms",
   "images|block": "images",
   "input.acceleration|block": "acceleration (mg)|%NAME",
   "input.buttonIsPressed|block": "button|%NAME|is pressed",