Changes to the Beta (#115)

* fixes for beta

- hide blocks without function
- digital Pin selection bring P0 in first position
- add compass block to end confusion about "basic.showArrow(ArrowNames.North)"
- add approved repos
- add and sort preffered repos
- add prefferedPackages
- disable webUSB
- disable parts
- remove mobileSafariDownloadProtocol
- update socialOptions

* remove `preferredPackages` from `pxtarget`

Co-authored-by: Juri <gitkraken@juriwolf.de>

libs/core/_locales/core-jsdoc-strings.json

@@ -396,6 +396,8 @@
   "images": "Creation, manipulation and display of LED images.",
   "images.createBigImage": "Creates an image with 2 frames.",
   "images.createImage": "Creates an image that fits on the LED screen.",
+  "images.showCompass": "Draws needle on the screen which always points to north",
+  "images.showCompass|param|interval": "the amount of time (milliseconds) to show the needle. Default is 600.",
   "input": "Events and data from sensors",
   "input.acceleration": "Get the acceleration value in milli-gravitys (when the board is laying flat with the screen up, x=0, y=0 and z=-1024)",
   "input.acceleration|param|dimension": "x, y, or z dimension, eg: Dimension.X",
@@ -553,16 +555,16 @@
   "pins.analogPitch|param|frequency": "frequency to modulate in Hz.",
   "pins.analogPitch|param|ms": "duration of the pitch in milli seconds.",
   "pins.analogReadPin": "Read the connector value as analog, that is, as a value comprised between 0 and 1023.",
-  "pins.analogReadPin|param|name": "pin to write to, eg: AnalogPin.P0",
+  "pins.analogReadPin|param|name": "pin to write to, eg: AnalogPin.P1",
   "pins.analogSetPeriod": "Configure the pulse-width modulation (PWM) period of the analog output in microseconds.\nIf this pin is not configured as an analog output (using `analog write pin`), the operation has no effect.",
   "pins.analogSetPeriod|param|micros": "period in micro seconds. eg:20000",
-  "pins.analogSetPeriod|param|name": "analog pin to set period to, eg: AnalogPin.P0",
+  "pins.analogSetPeriod|param|name": "analog pin to set period to, eg: AnalogPin.P1",
   "pins.analogSetPitchPin": "Set the pin used when using analog pitch or music.",
   "pins.analogSetPitchPin|param|name": "pin to modulate pitch from",
   "pins.analogSetPitchVolume": "Sets the volume on the pitch pin",
   "pins.analogSetPitchVolume|param|volume": "the intensity of the sound from 0..255",
   "pins.analogWritePin": "Set the connector value as analog. Value must be comprised between 0 and 1023.",
-  "pins.analogWritePin|param|name": "pin name to write to, eg: AnalogPin.P0",
+  "pins.analogWritePin|param|name": "pin name to write to, eg: AnalogPin.P1",
   "pins.analogWritePin|param|value": "value to write to the pin between ``0`` and ``1023``. eg:1023,0",
   "pins.createBuffer": "Create a new zero-initialized buffer.",
   "pins.createBuffer|param|size": "number of bytes in the buffer",
@@ -594,7 +596,7 @@
   "pins.servoSetPulse|param|micros": "pulse duration in micro seconds, eg:1500",
   "pins.servoSetPulse|param|name": "pin name",
   "pins.servoWritePin": "Write a value to the servo, controlling the shaft accordingly. On a standard servo, this will set the angle of the shaft (in degrees), moving the shaft to that orientation. On a continuous rotation servo, this will set the speed of the servo (with ``0`` being full-speed in one direction, ``180`` being full speed in the other, and a value near ``90`` being no movement).",
-  "pins.servoWritePin|param|name": "pin to write to, eg: AnalogPin.P0",
+  "pins.servoWritePin|param|name": "pin to write to, eg: AnalogPin.P1",
   "pins.servoWritePin|param|value": "angle or rotation speed, eg:180,90,0",
   "pins.setEvents": "Configure the events emitted by this pin. Events can be subscribed to\nusing ``control.onEvent()``.",
   "pins.setEvents|param|name": "pin to set the event mode on, eg: DigitalPin.P0",

libs/core/_locales/core-strings.json

@@ -310,6 +310,7 @@
   "images.createBigImage|block": "create big image",
   "images.createImage|block": "create image",
   "images.iconImage|block": "icon image %i",
+  "images.showCompass|block": "show compass needle for $interval|ms",
   "images|block": "images",
   "input.acceleration|block": "acceleration (mg)|%NAME",
   "input.buttonIsPressed|block": "button|%NAME|is pressed",

libs/core/compass.ts

@@ -0,0 +1,273 @@
+let compassImages = [
+    images.createImage(`
+    . . # . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . # . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    # . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    # . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    # . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    # . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    # . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . # . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . # . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . # .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . #
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . #
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . #
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . #
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . #
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . # .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `)];
+
+let compassImagesDownside = [
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . # . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . # .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . #
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . #
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . #
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . #
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . #
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . # .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . # . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . # . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    # . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    # . . . .
+    . . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    # . # . .
+    . . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    # . . . .
+    . . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    # . . . .
+    `),
+    images.createImage(`
+    . . . . .
+    . . . . .
+    . . # . .
+    . . . . .
+    . # . . .
+    `)];
+
+
+
+
+namespace images {
+    /**
+     * Draws needle on the screen which always points to north
+     * @param interval the amount of time (milliseconds) to show the needle. Default is 600.
+     */
+    //% weight=50 blockGap=8
+    //% blockId=basic_show_compass
+    //% block="show compass needle for $interval|ms"
+    //% interval.shadow=timePicker
+    //% interval.min=1
+    //% interval.defl=600
+    //% parts="ledmatrix"
+    //% advanced=true
+    export function showCompass(interval = 600) {
+        let i = 0
+        let startTime = input.runningTime()
+        let endTime = startTime + interval
+        let refreshRate = 100
+        let rest = 0
+        
+        while ((endTime) > (input.runningTime() + refreshRate)) {
+            i = Math.round((input.compassHeading() - 11.25) / 22.5)
+            if (input.isGesture(Gesture.ScreenDown)) {
+                compassImagesDownside[i].showImage(0, refreshRate)
+            } else {
+                compassImages[i].showImage(0, refreshRate)
+            }
+        }
+
+        rest = (endTime - input.runningTime())
+        if(rest > 0) {
+            i = Math.round((input.compassHeading() - 11.25) / 22.5)
+            if (input.isGesture(Gesture.ScreenDown)) {
+                compassImagesDownside[i].showImage(0, rest)
+            } else {
+                compassImages[i].showImage(0, rest)
+            }
+           
+        }    
+    }
+
+}

libs/core/music.ts

@@ -482,6 +482,7 @@ namespace music {
     //% help=music/set-volume
     //% weight=70
     //% group="Volume"
+    //% deprecated=true
     export function setVolume(volume: number): void {
         pins.analogSetPitchVolume(volume);
     }
@@ -494,6 +495,7 @@ namespace music {
     //% help=music/volume
     //% weight=69
     //% group="Volume"
+    //% deprecated=true
     export function volume(): number {
         return pins.analogPitchVolume();
     }

libs/core/pins.cpp

@@ -112,7 +112,7 @@ namespace pins {
 
     /**
      * Read the specified pin or connector as either 0 or 1
-     * @param name pin to read from, eg: DigitalPin.P1
+     * @param name pin to read from, eg: DigitalPin.P0
      */
     //% help=pins/digital-read-pin weight=30
     //% blockId=device_get_digital_pin block="digital read|pin %name" blockGap=8
@@ -124,7 +124,7 @@ namespace pins {
 
     /**
       * Set a pin or connector value to either 0 or 1.
-      * @param name pin to write to, eg: DigitalPin.P1
+      * @param name pin to write to, eg: DigitalPin.P0
       * @param value value to set on the pin, 1 eg,0
       */
     //% help=pins/digital-write-pin weight=29
@@ -178,7 +178,7 @@ namespace pins {
 
     /**
     * Configure the pin as a digital input and generate an event when the pin is pulsed either high or low.
-    * @param name digital pin to register to, eg: DigitalPin.P1
+    * @param name digital pin to register to, eg: DigitalPin.P0
     * @param pulse the value of the pulse, eg: PulseValue.High
     */
     //% help=pins/on-pulsed weight=22 blockGap=16 advanced=true
@@ -205,7 +205,7 @@ namespace pins {
 
     /**
     * Return the duration of a pulse at a pin in microseconds.
-    * @param name the pin which measures the pulse, eg: DigitalPin.P1
+    * @param name the pin which measures the pulse, eg: DigitalPin.P0
     * @param value the value of the pulse, eg: PulseValue.High
     * @param maximum duration in microseconds
     */
@@ -366,7 +366,7 @@ namespace pins {
 
     /**
     * Configure the pull directiion of of a pin.
-    * @param name pin to set the pull mode on, eg: DigitalPin.P1
+    * @param name pin to set the pull mode on, eg: DigitalPin.P0
     * @param pull one of the mbed pull configurations, eg: PinPullMode.PullUp
     */
     //% help=pins/set-pull weight=3 advanced=true
@@ -392,7 +392,7 @@ namespace pins {
     /**
     * Configure the events emitted by this pin. Events can be subscribed to
     * using ``control.onEvent()``.
-    * @param name pin to set the event mode on, eg: DigitalPin.P1
+    * @param name pin to set the event mode on, eg: DigitalPin.P0
     * @param type the type of events for this pin to emit, eg: PinEventType.Edge
     */
     //% help=pins/set-events weight=4 advanced=true

libs/core/pxt.json

@@ -56,6 +56,7 @@
         "templates.ts",
         "sendbuffer.s",
         "light.cpp",
+        "compass.ts",
         "parts/speaker.svg",
         "parts/headphone.svg",
         "parts/dcmotor.svg",

libs/core/shims.d.ts

@@ -662,7 +662,7 @@ declare namespace pins {
 
     /**
      * Read the connector value as analog, that is, as a value comprised between 0 and 1023.
-     * @param name pin to write to, eg: AnalogPin.P0
+     * @param name pin to write to, eg: AnalogPin.P1
      */
     //% help=pins/analog-read-pin weight=25
     //% blockId=device_get_analog_pin block="analog read|pin %name" blockGap="8"
@@ -672,7 +672,7 @@ declare namespace pins {
 
     /**
      * Set the connector value as analog. Value must be comprised between 0 and 1023.
-     * @param name pin name to write to, eg: AnalogPin.P0
+     * @param name pin name to write to, eg: AnalogPin.P1
      * @param value value to write to the pin between ``0`` and ``1023``. eg:1023,0
      */
     //% help=pins/analog-write-pin weight=24
@@ -685,7 +685,7 @@ declare namespace pins {
     /**
      * Configure the pulse-width modulation (PWM) period of the analog output in microseconds.
      * If this pin is not configured as an analog output (using `analog write pin`), the operation has no effect.
-     * @param name analog pin to set period to, eg: AnalogPin.P0
+     * @param name analog pin to set period to, eg: AnalogPin.P1
      * @param micros period in micro seconds. eg:20000
      */
     //% help=pins/analog-set-period weight=23 blockGap=8
@@ -728,7 +728,7 @@ declare namespace pins {
 
     /**
      * Write a value to the servo, controlling the shaft accordingly. On a standard servo, this will set the angle of the shaft (in degrees), moving the shaft to that orientation. On a continuous rotation servo, this will set the speed of the servo (with ``0`` being full-speed in one direction, ``180`` being full speed in the other, and a value near ``90`` being no movement).
-     * @param name pin to write to, eg: AnalogPin.P0
+     * @param name pin to write to, eg: AnalogPin.P1
      * @param value angle or rotation speed, eg:180,90,0
      */
     //% help=pins/servo-write-pin weight=20

package-lock.json

@@ -4322,9 +4322,9 @@
       }
     },
     "pxt-core": {
-      "version": "6.0.20",
+      "version": "6.0.23",
-      "resolved": "https://registry.npmjs.org/pxt-core/-/pxt-core-6.0.20.tgz",
+      "resolved": "https://registry.npmjs.org/pxt-core/-/pxt-core-6.0.23.tgz",
-      "integrity": "sha512-dugQC1/10P72exsR3Ed3vGuK8rLkP3+NjrWE+NrLqSH9064Fl20d1fGe8yHGjlbPYyKACDjJeX3fZy1Y12GzEA==",
+      "integrity": "sha512-3RYVuojjcN3AkFxivFnjRkghknXGbfVGYwkzdx6UGLlr4c+AtZqKJf9SNV0eJBDpQEukpe4DXEct7ADWHtXwoA==",
       "requires": {
         "applicationinsights-js": "^1.0.20",
         "bluebird": "3.5.1",

pxtarget.json

@@ -21,9 +21,6 @@
         "thumbnails": true,
         "publishing": true,
         "importing": true,
-        "preferredPackages": [
-            "Microsoft/pxt-neopixel"
-        ],
         "githubPackages": true,
         "cloudProviders": {
             "github": {}
@@ -113,7 +110,7 @@
                 "pid": "0x1025"
             }
         ],
-        "webUSB": true,
+        "webUSB": false,
         "useNewFunctions": true
     },
     "compileService": {
@@ -159,7 +156,7 @@
         "autoRun": true,
         "streams": false,
         "aspectRatio": 1.13,
-        "parts": true,
+        "parts": false,
         "partsAspectRatio": 0.69,
         "boardDefinition": {
             "visual": "calliope",
@@ -313,7 +310,6 @@
         "boardName": "Calliope mini",
         "driveDisplayName": "MINI",
         "appStoreID": "1309545545",
-        "mobileSafariDownloadProtocol": "microbithex://?data",
         "crowdinProject": "kindscript",
         "extendEditor": true,
         "extendFieldEditors": true,
@@ -357,10 +353,10 @@
         "monacoToolbox": true,
         "hasAudio": true,
         "socialOptions": {
-            "orgTwitterHandle": "MSMakeCode",
+            "orgTwitterHandle": "calliopemini",
-            "hashtags": "MakeCode",
+            "hashtags": "calliopemini",
-            "discourse": "https://forum.makecode.com/",
+            "discourse": "https://forum.calliope.cc",
-            "discourseCategory": "micro:bit"
+            "discourseCategory": "Probleme-Software"
         },
         "blocklyOptions": {
             "grid": {

targetconfig.json

@@ -196,18 +196,32 @@
             "daferdur/pxt-myHX711",
             "CytronTechnologies/pxt-edubit",
             "MakeAndLearn/pxt-microshield",
-            "elecfreaks/pxt-TPBot"
+            "elecfreaks/pxt-TPBot",
-        ],
-        "preferredRepos": [
-            "Microsoft/pxt-neopixel",
             "calliope-edu/pxt-grove",
             "tinysuperlab/motionkit",
             "tinysuperlab/touchkit",
+            "MKleinSB/pxt-seeed-temperature",
+            "MKleinSB/pxt-iot-lora-node-calliope",
+            "MKleinSB/pxt-dht11",
+            "MKleinSB/pxt-esp-thingspeak",
+            "MKleinSB/pxt-neopixel-calliope",
+            "MKleinSB/pxt-OLED-SSD1306"
+        ],
+        "preferredRepos": [
+            "tinysuperlab/motionkit",
+            "tinysuperlab/touchkit",
+            "calliope-edu/pxt-grove",
+            "Microsoft/pxt-neopixel",
             "Microsoft/pxt-microturtle",
             "MKleinSB/pxt-OLED-SSD1306",
             "MKleinSB/pxt-iot-lora-node",
-            "kittenbot/pxt-robotbit",
+            "MKleinSB/pxt-foldio",
-            "MKleinSB/pxt-foldio"
+            "MKleinSB/pxt-seeed-temperature",
+            "MKleinSB/pxt-iot-lora-node-calliope",
+            "MKleinSB/pxt-dht11",
+            "MKleinSB/pxt-esp-thingspeak",
+            "MKleinSB/pxt-neopixel-calliope",
+            "kittenbot/pxt-robotbit"
         ]
     },
     "galleries": {