merged master

docs/reference/pins/set-events.md

@@ -0,0 +1,30 @@
+# Set Events
+
+Configure the type of events emitted by a given pin.
+
+```sig
+pins.setEvents(DigitalPin.P0, PinEventType.Edge);
+```
+
+### Parameters
+
+* ``name``: The @boardname@ hardware pin to configure (``P0`` through ``P20``)
+* ``type``: The type of events this pin should emit
+
+### Example
+
+The following example configures pin ``P0`` and then
+subscribes to the rise and fall events.
+
+```blocks
+control.onEvent(control.eventSourceId(EventBusSource.MICROBIT_ID_IO_P0),  control.eventValueId(EventBusValue.MICROBIT_PIN_EVT_RISE), () => {
+    basic.showString("Rise")
+})
+control.onEvent(control.eventSourceId(EventBusSource.MICROBIT_ID_IO_P0),  control.eventValueId(EventBusValue.MICROBIT_PIN_EVT_FALL), () => {
+    basic.showString("Fall")
+})
+pins.setEvents(DigitalPin.P0, PinEventType.Edge)
+```
+
+**This is an advanced API.**  For more information, see the
+[@boardname@ runtime messageBus documentation](https://lancaster-university.github.io/microbit-docs/ubit/messageBus/)

libs/core/_locales/core-jsdoc-strings.json

@@ -230,6 +230,9 @@
   "pins.servoWritePin": "Writes a value to the servo, controlling the shaft accordingly. On a standard servo, this will set the angle of the shaft (in degrees), moving the shaft to that orientation. On a continuous rotation servo, this will set the speed of the servo (with ``0`` being full-speed in one direction, ``180`` being full speed in the other, and a value near ``90`` being no movement).",
   "pins.servoWritePin|param|name": "pin to write to",
   "pins.servoWritePin|param|value": "angle or rotation speed, eg:180,90,0",
+  "pins.setEvents": "Configures the events emitted by this pin. Events can be subscribed to\nusing ``control.onEvent()``.",
+  "pins.setEvents|param|name": "pin to set the event mode on, eg: DigitalPin.P0",
+  "pins.setEvents|param|type": "the type of events for this pin to emit, eg: PinEventType.Edge",
   "pins.setPull": "Configures the pull of this pin.",
   "pins.setPull|param|name": "pin to set the pull mode on",
   "pins.setPull|param|pull": "one of the mbed pull configurations: PullUp, PullDown, PullNone ",

libs/core/_locales/core-strings.json

@@ -83,6 +83,10 @@
   "Note.GSharp4|block": "G#4",
   "Note.GSharp5|block": "G#5",
   "Note.GSharp|block": "G#",
+  "PinEventType.Edge|block": "edge",
+  "PinEventType.None|block": "none",
+  "PinEventType.Pulse|block": "pulse",
+  "PinEventType.Touch|block": "touch",
   "PinPullMode.PullDown|block": "down",
   "PinPullMode.PullNone|block": "none",
   "PinPullMode.PullUp|block": "up",
@@ -177,6 +181,7 @@
   "pins.pulseIn|block": "pulse in (µs)|pin %name|pulsed %value",
   "pins.servoSetPulse|block": "servo set pulse|pin %value|to (µs) %micros",
   "pins.servoWritePin|block": "servo write|pin %name|to %value",
+  "pins.setEvents|block": "set pin %pin|to emit %type|events",
   "pins.setPull|block": "set pull|pin %pin|to %pull",
   "pins.spiWrite|block": "spi write %value",
   "pins|block": "pins",

libs/core/control.cpp

@@ -57,6 +57,10 @@ enum EventBusValue {
     MICROBIT_BUTTON_EVT_CLICK_ = MICROBIT_BUTTON_EVT_CLICK,
     MICROBIT_RADIO_EVT_DATAGRAM_ = MICROBIT_RADIO_EVT_DATAGRAM,
     MICROBIT_ACCELEROMETER_EVT_DATA_UPDATE_ = MICROBIT_ACCELEROMETER_EVT_DATA_UPDATE,
+    MICROBIT_PIN_EVT_RISE_ = MICROBIT_PIN_EVT_RISE,
+    MICROBIT_PIN_EVT_FALL_ = MICROBIT_PIN_EVT_FALL,
+    MICROBIT_PIN_EVT_PULSE_HI_ = MICROBIT_PIN_EVT_PULSE_HI,
+    MICROBIT_PIN_EVT_PULSE_LO_ = MICROBIT_PIN_EVT_PULSE_LO,
     MES_ALERT_EVT_ALARM1_ = MES_ALERT_EVT_ALARM1,
     MES_ALERT_EVT_ALARM2_ = MES_ALERT_EVT_ALARM2,
     MES_ALERT_EVT_ALARM3_ = MES_ALERT_EVT_ALARM3,

libs/core/enums.d.ts

@@ -176,6 +176,10 @@ declare namespace input {
     MICROBIT_BUTTON_EVT_CLICK = 3,  // MICROBIT_BUTTON_EVT_CLICK
     MICROBIT_RADIO_EVT_DATAGRAM = 1,  // MICROBIT_RADIO_EVT_DATAGRAM
     MICROBIT_ACCELEROMETER_EVT_DATA_UPDATE = 1,  // MICROBIT_ACCELEROMETER_EVT_DATA_UPDATE
+    MICROBIT_PIN_EVT_RISE = 2,  // MICROBIT_PIN_EVT_RISE
+    MICROBIT_PIN_EVT_FALL = 3,  // MICROBIT_PIN_EVT_FALL
+    MICROBIT_PIN_EVT_PULSE_HI = 4,  // MICROBIT_PIN_EVT_PULSE_HI
+    MICROBIT_PIN_EVT_PULSE_LO = 5,  // MICROBIT_PIN_EVT_PULSE_LO
     MES_ALERT_EVT_ALARM1 = 6,  // MES_ALERT_EVT_ALARM1
     MES_ALERT_EVT_ALARM2 = 7,  // MES_ALERT_EVT_ALARM2
     MES_ALERT_EVT_ALARM3 = 8,  // MES_ALERT_EVT_ALARM3
@@ -310,6 +314,18 @@ declare namespace motors {
     }
 
 
+    declare enum PinEventType {
+    //% block="edge"
+    Edge = 1,  // MICROBIT_PIN_EVENT_ON_EDGE
+    //% block="pulse"
+    Pulse = 2,  // MICROBIT_PIN_EVENT_ON_PULSE
+    //% block="touch"
+    Touch = 3,  // MICROBIT_PIN_EVENT_ON_TOUCH
+    //% block="none"
+    None = 0,  // MICROBIT_PIN_EVENT_NONE
+    }
+
+
     declare enum SerialPin {
     P0 = 7,  // MICROBIT_ID_IO_P0
     P1 = 8,  // MICROBIT_ID_IO_P1

libs/core/pins.cpp

@@ -43,6 +43,17 @@ enum class PinPullMode {
     PullNone = 2
 };
 
+enum class PinEventType {
+    //% block="edge"
+    Edge = MICROBIT_PIN_EVENT_ON_EDGE,
+    //% block="pulse"
+    Pulse = MICROBIT_PIN_EVENT_ON_PULSE,
+    //% block="touch"
+    Touch = MICROBIT_PIN_EVENT_ON_TOUCH,
+    //% block="none"
+    None = MICROBIT_PIN_EVENT_NONE
+};
+
 MicroBitPin *getPin(int id) {
     switch (id) {
         case MICROBIT_ID_IO_P0: return &uBit.io.P0;
@@ -223,7 +234,8 @@ namespace pins {
      * Sets the pin used when using `pins->analog pitch`.
      * @param name TODO
      */
-    //% help=pins/analog-set-pitch weight=12
+    //% blockId=device_analog_set_pitch_pin block="analog set pitch pin %name"
+    //% help=pins/analog-set-pitch weight=3 advanced=true
     void analogSetPitchPin(AnalogPin name) {
       pitchPin = getPin((int)name);
     }
@@ -233,9 +245,11 @@ namespace pins {
      * @param frequency TODO
      * @param ms TODO
      */
-    //% help=pins/analog-pitch weight=14 async
+    //% blockId=device_analog_pitch block="analog pitch %frequency|for (ms) %ms"
+    //% help=pins/analog-pitch weight=4 async advanced=true blockGap=8
     void analogPitch(int frequency, int ms) {
-      if (pitchPin == NULL) return;
+      if (pitchPin == NULL)
+        analogSetPitchPin(AnalogPin::P1);
       if (frequency <= 0) {
         pitchPin->setAnalogValue(0);
       } else {
@@ -267,6 +281,18 @@ namespace pins {
         PINOP(setPull(m));
     }
 
+    /**
+    * Configures the events emitted by this pin. Events can be subscribed to
+    * using ``control.onEvent()``.
+    * @param name pin to set the event mode on, eg: DigitalPin.P0
+    * @param type the type of events for this pin to emit, eg: PinEventType.Edge
+    */
+    //% help=pins/set-events weight=4 advanced=true
+    //% blockId=device_set_pin_events block="set pin %pin|to emit %type|events"
+    void setEvents(DigitalPin name, PinEventType type) {
+        getPin((int)name)->eventOn((int)type);
+    }
+
     /**
      * Create a new zero-initialized buffer.
      * @param size number of bytes in the buffer

libs/core/shims.d.ts

@@ -651,7 +651,8 @@ declare namespace pins {
      * Sets the pin used when using `pins->analog pitch`.
      * @param name TODO
      */
-    //% help=pins/analog-set-pitch weight=12 shim=pins::analogSetPitchPin
+    //% blockId=device_analog_set_pitch_pin block="analog set pitch pin %name"
+    //% help=pins/analog-set-pitch weight=3 advanced=true shim=pins::analogSetPitchPin
     function analogSetPitchPin(name: AnalogPin): void;
 
     /**
@@ -659,7 +660,8 @@ declare namespace pins {
      * @param frequency TODO
      * @param ms TODO
      */
-    //% help=pins/analog-pitch weight=14 async shim=pins::analogPitch
+    //% blockId=device_analog_pitch block="analog pitch %frequency|for (ms) %ms"
+    //% help=pins/analog-pitch weight=4 async advanced=true blockGap=8 shim=pins::analogPitch
     function analogPitch(frequency: number, ms: number): void;
 
     /**
@@ -671,6 +673,16 @@ declare namespace pins {
     //% blockId=device_set_pull block="set pull|pin %pin|to %pull" shim=pins::setPull
     function setPull(name: DigitalPin, pull: PinPullMode): void;
 
+    /**
+     * Configures the events emitted by this pin. Events can be subscribed to
+     * using ``control.onEvent()``.
+     * @param name pin to set the event mode on, eg: DigitalPin.P0
+     * @param type the type of events for this pin to emit, eg: PinEventType.Edge
+     */
+    //% help=pins/set-events weight=4 advanced=true
+    //% blockId=device_set_pin_events block="set pin %pin|to emit %type|events" shim=pins::setEvents
+    function setEvents(name: DigitalPin, type: PinEventType): void;
+
     /**
      * Create a new zero-initialized buffer.
      * @param size number of bytes in the buffer

sim/state/misc.ts

@@ -119,6 +119,9 @@ namespace pxsim.pins {
     export function getPinAddress(name: number) {
         return getPin(name)
     }
+
+    export function setEvents(name: number, event: number) {
+    }
 }
 
 namespace pxsim.devices {