updated charting
This commit is contained in:
@ -4,10 +4,11 @@ Measure the acceleration on the micro:bit in the "z" direction.
|
||||
|
||||
### ~avatar avatar
|
||||
|
||||
### ~
|
||||
|
||||
Welcome! This activity will teach how to use the 1st micro:bit to chart the second micro:bit's acceleration in the "x" direction. Let's get started!
|
||||
|
||||
|
||||
###
|
||||
|
||||
Let's measure `acceleration (mg)` and then `send number`. `Acceleration` is measured in **milli-gravities**, so a value of -1000 is equivalent to -1g or -9.81m/s^2. We will be able to get the acceleration value (g-force), in the specified "x" dimension. `Send number` will broadcast a number data packet to other micro:bits connected via radio.
|
||||
|
||||
```blocks
|
||||
@ -47,6 +48,21 @@ radio.onDataReceived(() => {
|
||||
|
||||
```
|
||||
|
||||
Notice that moving the micro:bit the farthest direction in the x direction will be -1023 on the charting beneath the simulator. The second observation will be that the LEDs will be full brightness on the 2nd micro:bit. There is a single LED turned on with the 1st micro:bit. Additionally, the graphs will reflect 0 acceleation for the 1st micro:bit. In this scenario, if you are adjusting the acceleration in the simualator, you are also changing your chart that will be produced.
|
||||
|
||||

|
||||
|
||||
NOTE: The colors of the charts reflect the color of the micro:bit simulator. In this instance, the micro:bits are blue and green. So the colors of the line graphs reflect the colors of the micro:bit
|
||||
|
||||
After running this simulatation several seconds by moving the micro:bit side to side in the x direction, you are ready to graph or chart the accceleration of the micro:bit. We want a printout of our acceleration on Excel. We will graph the fluctuating acceleration of the simulation experiment.
|
||||
|
||||

|
||||
|
||||
Finally, you must open the Excel CSV file by clicking on the data.xls file that was downloaded to Downloads Folder.
|
||||
|
||||

|
||||
|
||||
Have fun reviewing your simulation and analyze the acceleration by chart the Excel data using Excel.
|
||||
|
||||
* Connect the first micro:bit to your computer using your USB cable and run the charting script on it.
|
||||
* Connect the second micro:bit to your computer using your USB cable and run the charting script on it.
|
||||
|
Reference in New Issue
Block a user