fix pins to be in sync with the naming in the simulator and on the board

libs/core/_locales/core-jsdoc-strings.json

@@ -169,9 +169,9 @@
   "led.unplot|param|x": "TODO",
   "led.unplot|param|y": "TODO",
   "motors": "Blocks to control the onboard motors",
-  "motors.dualMotorPower": "Controls two motors attached to the board.",
+  "motors.dualMotorPower": "Controls two motors attached to the board. Switches to dual-motor mode!",
-  "motors.motorCommand": "Send break, coast or sleep commands to the motor",
+  "motors.motorCommand": "Send break, coast or sleep commands to the motor. Has no effect in dual-motor mode.",
-  "motors.motorPower": "Turns on the motor at a certain percent of power.",
+  "motors.motorPower": "Turns on the motor at a certain percent of power. Switches to single motor mode!",
   "motors.motorPower|param|power": "%percent of power sent to the motor. Negative power goes backward. eg: 50",
   "music": "Generation of music tones through pin ``P0``.",
   "music.beat": "Returns the duration of a beat in milli-seconds",
@@ -180,7 +180,6 @@
   "music.noteFrequency": "Gets the frequency of a note.",
   "music.noteFrequency|param|name": "the note name",
   "music.playTone": "Plays a tone through ``speaker`` for the given duration.",
-  "music.playTone|param|frequency": "pitch of the tone to play in Hertz (Hz)",
   "music.playTone|param|ms": "tone duration in milliseconds (ms)",
   "music.rest": "Rests (plays nothing) for a specified time through pin ``P0``.",
   "music.rest|param|ms": "rest duration in milliseconds (ms)",

libs/core/enums.d.ts

@@ -266,37 +266,33 @@ declare namespace motors {
     P0 = 7,  // MICROBIT_ID_IO_P0
     P1 = 8,  // MICROBIT_ID_IO_P1
     P2 = 9,  // MICROBIT_ID_IO_P2
-    P3 = 10,  // MICROBIT_ID_IO_P3
+    P3 = 40,  // CALLIOPE_ID_IO_P22
-    P4 = 11,  // MICROBIT_ID_IO_P4
+    C4 = 10,  // MICROBIT_ID_IO_P3
-    P5 = 12,  // MICROBIT_ID_IO_P5
+    C5 = 11,  // MICROBIT_ID_IO_P4
-    P6 = 13,  // MICROBIT_ID_IO_P6
+    C6 = 17,  // MICROBIT_ID_IO_P10
-    P7 = 14,  // MICROBIT_ID_IO_P7
+    C7 = 34,  // CALLIOPE_ID_IO_P7
-    //P8 = MICROBIT_ID_IO_P8,
+    C8 = 35,  // CALLIOPE_ID_IO_P8
-    P9 = 16,  // MICROBIT_ID_IO_P9
+    C9 = 36,  // CALLIOPE_ID_IO_P9
-    P10 = 17,  // MICROBIT_ID_IO_P10
+    C10 = 16,  // MICROBIT_ID_IO_P9
-    P11 = 18,  // MICROBIT_ID_IO_P11
+    C11 = 14,  // MICROBIT_ID_IO_P7
-    //P12 = MICROBIT_ID_IO_P12,
+    C12 = 13,  // MICROBIT_ID_IO_P6
-    //P13 = MICROBIT_ID_IO_P13,
+    C13 = 37,  // CALLIOPE_ID_IO_P13
-    //P14 = MICROBIT_ID_IO_P14,
+    C14 = 38,  // CALLIOPE_ID_IO_P14
-    //P15 = MICROBIT_ID_IO_P15,
+    C15 = 39,  // CALLIOPE_ID_IO_P15
     //P16 = MICROBIT_ID_IO_P16,
-    P19 = 24,  // MICROBIT_ID_IO_P19
+    C19 = 24,  // MICROBIT_ID_IO_P19
     P20 = 25,  // MICROBIT_ID_IO_P20
-    P28 = 41,  // CALLIOPE_ID_IO_P28
-    P29 = 42,  // CALLIOPE_ID_IO_P29
-    P30 = 43,  // CALLIOPE_ID_IO_P30
     }
 
 
     declare enum AnalogPin {
-    P0 = 7,  // MICROBIT_ID_IO_P0
+    //P0 = MICROBIT_ID_IO_P0, -- does not work analogue
     P1 = 8,  // MICROBIT_ID_IO_P1
     P2 = 9,  // MICROBIT_ID_IO_P2
-    P3 = 10,  // MICROBIT_ID_IO_P3
+    //P3 = CALLIOPE_ID_IO_P22, -- does not work analogue
-    P4 = 11,  // MICROBIT_ID_IO_P4
+    C4 = 10,  // MICROBIT_ID_IO_P3
-    P10 = 17,  // MICROBIT_ID_IO_P10
+    C5 = 11,  // MICROBIT_ID_IO_P4
-    P29 = 42,  // CALLIOPE_ID_IO_P29
+    C6 = 17,  // MICROBIT_ID_IO_P10
-    P30 = 43,  // CALLIOPE_ID_IO_P30
     }
 
 

libs/core/pins.cpp

@@ -1,39 +1,35 @@
 #include "ksbit.h"
 
 enum class DigitalPin {
-    P0 = MICROBIT_ID_IO_P0,
+    P0 = MICROBIT_ID_IO_P0,   // edge connector 0
-    P1 = MICROBIT_ID_IO_P1,
+    P1 = MICROBIT_ID_IO_P1,   // edge connector 1
-    P2 = MICROBIT_ID_IO_P2,
+    P2 = MICROBIT_ID_IO_P2,   // edge connector 2
-    P3 = MICROBIT_ID_IO_P3,
+    P3 = CALLIOPE_ID_IO_P22,  // edge connector 3
-    P4 = MICROBIT_ID_IO_P4,
+    C4 = MICROBIT_ID_IO_P3,   // LED matrix C1
-    P5 = MICROBIT_ID_IO_P5,
+    C5 = MICROBIT_ID_IO_P4,   // LED matrix C2
-    P6 = MICROBIT_ID_IO_P6,
+    C6 = MICROBIT_ID_IO_P10,  // LED matrix C3
-    P7 = MICROBIT_ID_IO_P7,
+    C7 = CALLIOPE_ID_IO_P7,   // LED matrix C4
-    //P8 = MICROBIT_ID_IO_P8,
+    C8 = CALLIOPE_ID_IO_P8,   // LED matrix C5
-    P9 = MICROBIT_ID_IO_P9,
+    C9 = CALLIOPE_ID_IO_P9,   // LED matrix C6
-    P10 = MICROBIT_ID_IO_P10,
+    C10 = MICROBIT_ID_IO_P9,  // LED matrix C7
-    P11 = MICROBIT_ID_IO_P11,
+    C11 = MICROBIT_ID_IO_P7,  // LED matrix C8
-    //P12 = MICROBIT_ID_IO_P12,
+    C12 = MICROBIT_ID_IO_P6,  // LED matrix C9
-    //P13 = MICROBIT_ID_IO_P13,
+    C13 = CALLIOPE_ID_IO_P13, // LED matrix R1
-    //P14 = MICROBIT_ID_IO_P14,
+    C14 = CALLIOPE_ID_IO_P14, // LED matrix R2
-    //P15 = MICROBIT_ID_IO_P15,
+    C15 = CALLIOPE_ID_IO_P15, // LED matrix R3
     //P16 = MICROBIT_ID_IO_P16,
-    P19 = MICROBIT_ID_IO_P19,
+    C19 = MICROBIT_ID_IO_P19, // SCL
-    P20 = MICROBIT_ID_IO_P20,
+    P20 = MICROBIT_ID_IO_P20, // SDA
-    P28 = CALLIOPE_ID_IO_P28,
-    P29 = CALLIOPE_ID_IO_P29,
-    P30 = CALLIOPE_ID_IO_P30
 };
 
 enum class AnalogPin {
-    P0 = MICROBIT_ID_IO_P0,
+    //P0 = MICROBIT_ID_IO_P0, -- does not work analogue
-    P1 = MICROBIT_ID_IO_P1,
+    P1 = MICROBIT_ID_IO_P1,   // edge connector 1
-    P2 = MICROBIT_ID_IO_P2,
+    P2 = MICROBIT_ID_IO_P2,   // edge connector 2
-    P3 = MICROBIT_ID_IO_P3,
+    //P3 = CALLIOPE_ID_IO_P22, -- does not work analogue
-    P4 = MICROBIT_ID_IO_P4,
+    C4 = MICROBIT_ID_IO_P3,
-    P10 = MICROBIT_ID_IO_P10,
+    C5 = MICROBIT_ID_IO_P4,
-    P29 = CALLIOPE_ID_IO_P29,
+    C6 = MICROBIT_ID_IO_P10,
-    P30 = CALLIOPE_ID_IO_P30
 };
 
 enum class PulseValue {