support for hex template (#1913)
This commit is contained in:
		@@ -47,6 +47,7 @@
 | 
			
		||||
        "advmath.cpp",
 | 
			
		||||
        "trig.cpp",
 | 
			
		||||
        "fixed.ts",
 | 
			
		||||
        "templates.ts",
 | 
			
		||||
        "parts/speaker.svg",
 | 
			
		||||
        "parts/headphone.svg"
 | 
			
		||||
    ],
 | 
			
		||||
 
 | 
			
		||||
@@ -4,9 +4,11 @@
 | 
			
		||||
  "servos.Servo.run": "Set the throttle on a continuous servo",
 | 
			
		||||
  "servos.Servo.run|param|speed": "the throttle of the motor from -100% to 100%",
 | 
			
		||||
  "servos.Servo.setAngle": "Set the servo angle",
 | 
			
		||||
  "servos.Servo.setRange": "Configure the range support by the servo between 0 and 180",
 | 
			
		||||
  "servos.Servo.setPulse": "Set the pulse width to the servo in microseconds",
 | 
			
		||||
  "servos.Servo.setPulse|param|micros": "the width of the pulse in microseconds",
 | 
			
		||||
  "servos.Servo.setRange": "Set the possible rotation range angles for the servo between 0 and 180",
 | 
			
		||||
  "servos.Servo.setRange|param|maxAngle": "the maximum angle from 90 to 180",
 | 
			
		||||
  "servos.Servo.setRange|param|minAngle": "the minimum angle from 0 to 90",
 | 
			
		||||
  "servos.Servo.setStopOnNeutral": "Sets a mode where the servo is stopped when the angle is neutral (0%).",
 | 
			
		||||
  "servos.Servo.setStopOnNeutral|param|on": "true to enable this mode"
 | 
			
		||||
  "servos.Servo.setStopOnNeutral": "Set a servo stop mode so it will stop when the rotation angle is in the neutral position, 90 degrees.",
 | 
			
		||||
  "servos.Servo.stop": "Stop sending commands to the servo so that its rotation will stop at the current position."
 | 
			
		||||
}
 | 
			
		||||
@@ -6,7 +6,7 @@
 | 
			
		||||
  "servos.Servo.setAngle|block": "set %servo angle to %degrees=protractorPicker °",
 | 
			
		||||
  "servos.Servo.setPulse|block": "set %servo pulse to %micros μs",
 | 
			
		||||
  "servos.Servo.setRange|block": "set %servo range from %minAngle to %maxAngle",
 | 
			
		||||
  "servos.Servo.setStopOnNeutral|block": "set %servo stop on neutral %on",
 | 
			
		||||
  "servos.Servo.setStopOnNeutral|block": "set %servo stop on neutral %enabled",
 | 
			
		||||
  "servos.Servo.stop|block": "stop %servo",
 | 
			
		||||
  "{id:category}Servos": "Servos",
 | 
			
		||||
  "{id:group}Configuration": "Configuration",
 | 
			
		||||
 
 | 
			
		||||
@@ -42,7 +42,7 @@
 | 
			
		||||
    "@types/web-bluetooth": "0.0.4"
 | 
			
		||||
  },
 | 
			
		||||
  "dependencies": {
 | 
			
		||||
    "pxt-common-packages": "6.4.12",
 | 
			
		||||
    "pxt-core": "5.5.15"
 | 
			
		||||
    "pxt-common-packages": "6.5.3",
 | 
			
		||||
    "pxt-core": "5.5.24"
 | 
			
		||||
  }
 | 
			
		||||
}
 | 
			
		||||
 
 | 
			
		||||
		Reference in New Issue
	
	Block a user