adding lessons to create circuit using aluminium foil

docs/device/foil-circuits.md

@@ -0,0 +1,52 @@
+# foil circuits
+
+The large holes at the bottom of the board are designed to attach alligator/crocodile clips 
+to create electrical circuit with other components.
+
+If you do not have crocodile clips at hand, dyou can use wires or even Aluminium foil to acheive the same result.
+We will show you how to connect the micro:bit to headphones using Alumunium foil and tape.
+
+https://youtu.be/mhXYyPuvpz0
+
+### Materials
+
+* micro:bit and battery pack (you can also power it via USB)
+* a small piece of cardboard
+* Aluminium foil
+* tape
+
+### Assembly instructions
+
+Tape the micro:bit and battery pack to the card board. Make sure to remove the batteries while you are building your circuit.
+
+![](/static/mb/device/croc-clips/microbitattached.jpg)
+
+Cut the thinest strip of foil possible and roll it into a cable. You can also try to fold, whatever works for you.
+Build two of those wires.
+
+![](/static/mb/device/croc-clips/foilcut.jpg)
+
+Place the foil wire on the ``GND`` pin and attach with a piece of tape. Press hard to get the best connection between
+the foil and the pin board. Make sure the foil is not overlapping with the other pins!
+
+![](/static/mb/device/croc-clips/groundconnected.jpg)
+
+Place the second wire on the ``P0`` pin the same way. Make sure the wire does not overlap with the other pins!
+
+![](/static/mb/device/croc-clips/microbitconnect.jpg)
+
+Tape the headphone jack connector to the cardboard and roll the wire coming from ``GND`` around the metal base. 
+Make sure the wire does not touch the other metal rings on the jack.
+
+![](/static/mb/device/croc-clips/jackground.jpg)
+
+Tape the second wire on the head of the jack connector.
+
+![](/static/mb/device/croc-clips/jackconnect.jpg)
+
+![](/static/mb/device/croc-clips/foilcircuit.jpg)
+
+
+## See also
+
+[micro:bit pins](/device/pins)