Beta v4 updates (#195)
* fix simulator - fix buttons - fix analog max value * BLE Set max table size * reset defaults * add coding4coconut/pxt-lcd128x160-st7735s * add coding4coconut/pxt-oled128x128-sh1107 * enable partial flashing
This commit is contained in:
Juri Wolf
GitHub
parent
5aba020bb3
commit
fa34fe5fd2
@ -268,7 +268,7 @@
|
||||
"basic.showCompass|param|interval": "the amount of time (milliseconds) to show the needle. Default is 600.",
|
||||
"basic.showIcon": "Draws the selected icon on the LED screen",
|
||||
"basic.showIcon|param|icon": "the predefined icon id",
|
||||
"basic.showIcon|param|interval": "the amount of time (milliseconds) to block the LED Matrix for showing the icon. Default is 200.",
|
||||
"basic.showIcon|param|interval": "the amount of time (milliseconds) to block the LED Matrix for showing the icon. Default is 600.",
|
||||
"basic.showLeds": "Draws an image on the LED screen.",
|
||||
"basic.showLeds|param|interval": "time in milliseconds to pause after drawing",
|
||||
"basic.showLeds|param|leds": "the pattern of LED to turn on/off",
|
||||
@ -442,9 +442,18 @@
|
||||
"input.onButtonEvent|param|body": "code to run when event is raised",
|
||||
"input.onButtonEvent|param|button": "the button",
|
||||
"input.onButtonEvent|param|eventType": "event Type",
|
||||
"input.onButtonPressed": "Do something when a button (A, B or both A+B) is pushed down and released again.",
|
||||
"input.onButtonPressed|param|body": "code to run when event is raised",
|
||||
"input.onButtonPressed|param|button": "the button that needs to be pressed",
|
||||
"input.onGesture": "Do something when when a gesture is done (like shaking the micro:bit).",
|
||||
"input.onGesture|param|body": "code to run when gesture is raised",
|
||||
"input.onGesture|param|gesture": "the type of gesture to track, eg: Gesture.Shake",
|
||||
"input.onPinPressed": "Do something when a pin is touched and released again (while also touching the GND pin).",
|
||||
"input.onPinPressed|param|body": "the code to run when the pin is pressed",
|
||||
"input.onPinPressed|param|name": "the pin that needs to be pressed, eg: TouchPin.P0",
|
||||
"input.onPinReleased": "Do something when a pin is released.",
|
||||
"input.onPinReleased|param|body": "the code to run when the pin is released",
|
||||
"input.onPinReleased|param|name": "the pin that needs to be released, eg: TouchPin.P0",
|
||||
"input.onPinTouchEvent": "Do something when a pin receives an touch event (while also touching the GND pin).",
|
||||
"input.onPinTouchEvent|param|body": "the code to run when event is fired on pin",
|
||||
"input.onPinTouchEvent|param|name": "the pin, eg: TouchPin.P0",
|
||||
|
||||
@ -345,7 +345,10 @@
|
||||
"input.lightLevel|block": "light level",
|
||||
"input.magneticForce|block": "magnetic force (µT)|%NAME",
|
||||
"input.onButtonEvent|block": "on button %NAME| %eventType=control_button_event_value_id",
|
||||
"input.onButtonPressed|block": "on button|%NAME|pressed",
|
||||
"input.onGesture|block": "on |%NAME",
|
||||
"input.onPinPressed|block": "on pin %name|pressed",
|
||||
"input.onPinReleased|block": "on pin %NAME|released",
|
||||
"input.onPinTouchEvent|block": "on pin %name| %eventType=control_button_event_value_id",
|
||||
"input.pinIsPressed|block": "pin %NAME|is pressed",
|
||||
"input.rotation|block": "rotation (°)|%NAME",
|
||||
@ -484,8 +487,10 @@
|
||||
"{id:category}String": "String",
|
||||
"{id:category}Text": "Text",
|
||||
"{id:category}_py": "_py",
|
||||
"{id:group}Analog": "Analog",
|
||||
"{id:group}Configuration": "Configuration",
|
||||
"{id:group}Control": "Control",
|
||||
"{id:group}Digital": "Digital",
|
||||
"{id:group}Events": "Events",
|
||||
"{id:group}Get": "Get",
|
||||
"{id:group}LED matrix": "LED matrix",
|
||||
@ -493,15 +498,20 @@
|
||||
"{id:group}Melody Advanced": "Melody Advanced",
|
||||
"{id:group}Modify": "Modify",
|
||||
"{id:group}Operations": "Operations",
|
||||
"{id:group}Pitch": "Pitch",
|
||||
"{id:group}Pulse": "Pulse",
|
||||
"{id:group}Put": "Put",
|
||||
"{id:group}RGB LED": "RGB LED",
|
||||
"{id:group}Read": "Read",
|
||||
"{id:group}Remove": "Remove",
|
||||
"{id:group}Sensors": "Sensors",
|
||||
"{id:group}Servo": "Servo",
|
||||
"{id:group}Silence": "Silence",
|
||||
"{id:group}States": "States",
|
||||
"{id:group}System": "System",
|
||||
"{id:group}Tempo": "Tempo",
|
||||
"{id:group}Tone": "Tone",
|
||||
"{id:group}Volume": "Volume"
|
||||
"{id:group}Volume": "Volume",
|
||||
"{id:group}i2c": "i2c",
|
||||
"{id:group}spi": "spi"
|
||||
}
|
||||
@ -35,9 +35,9 @@ namespace basic {
|
||||
//% parts="ledmatrix"
|
||||
//% text.shadowOptions.toString=true
|
||||
//% expandableArgumentMode="toggle"
|
||||
//% interval.defl=80
|
||||
//% interval.defl=150
|
||||
//% group="LED matrix"
|
||||
void showString(String text, int interval = 80) {
|
||||
void showString(String text, int interval = 150) {
|
||||
if (interval <= 0)
|
||||
interval = 1;
|
||||
int l = text ? text->getUTF8Size() : 0;
|
||||
|
||||
@ -52,7 +52,7 @@ namespace basic {
|
||||
//% async
|
||||
//% parts="ledmatrix"
|
||||
//% expandableArgumentMode="toggle"
|
||||
//% interval.defl=80
|
||||
//% interval.defl=150
|
||||
//% group="LED matrix"
|
||||
export function showNumber(value: number, interval?: number) {
|
||||
showString(Math.roundWithPrecision(value, 2).toString(), interval);
|
||||
|
||||
@ -196,7 +196,7 @@ namespace basic {
|
||||
/**
|
||||
* Draws the selected icon on the LED screen
|
||||
* @param icon the predefined icon id
|
||||
* @param interval the amount of time (milliseconds) to block the LED Matrix for showing the icon. Default is 200.
|
||||
* @param interval the amount of time (milliseconds) to block the LED Matrix for showing the icon. Default is 600.
|
||||
*/
|
||||
//% weight=90 blockGap=8
|
||||
//% blockId=basic_show_icon
|
||||
@ -208,9 +208,9 @@ namespace basic {
|
||||
//% icon.fieldOptions.width="380"
|
||||
//% icon.fieldOptions.maxRows=4
|
||||
//% expandableArgumentMode="toggle"
|
||||
//% interval.defl=200
|
||||
//% interval.defl=600
|
||||
//% group="LED matrix"
|
||||
export function showIcon(icon: IconNames, interval = 200) {
|
||||
export function showIcon(icon: IconNames, interval = 600) {
|
||||
let res = images.iconImage(icon)
|
||||
res.showImage(0, interval)
|
||||
}
|
||||
|
||||
@ -262,6 +262,57 @@ namespace input {
|
||||
return false;
|
||||
}
|
||||
|
||||
/**
|
||||
* Do something when a button (A, B or both A+B) is pushed down and released again.
|
||||
* @param button the button that needs to be pressed
|
||||
* @param body code to run when event is raised
|
||||
*/
|
||||
//% help=input/on-button-pressed weight=85 blockGap=16
|
||||
//% blockId=device_button_event block="on button|%NAME|pressed"
|
||||
//% parts="buttonpair"
|
||||
//% deprecated=true
|
||||
//% group="Events"
|
||||
void onButtonPressed(Button button, Action body) {
|
||||
registerWithDal((int)button, MICROBIT_BUTTON_EVT_CLICK, body);
|
||||
}
|
||||
|
||||
/**
|
||||
* Do something when a pin is touched and released again (while also touching the GND pin).
|
||||
* @param name the pin that needs to be pressed, eg: TouchPin.P0
|
||||
* @param body the code to run when the pin is pressed
|
||||
*/
|
||||
//% help=input/on-pin-pressed weight=83 blockGap=16
|
||||
//% blockId=device_pin_event block="on pin %name|pressed"
|
||||
//% group="Events"
|
||||
//% deprecated=true
|
||||
void onPinPressed(TouchPin name, Action body) {
|
||||
auto pin = getPin((int)name);
|
||||
if (!pin) return;
|
||||
|
||||
// Forces the PIN to switch to makey-makey style detection.
|
||||
pin->isTouched();
|
||||
registerWithDal((int)name, MICROBIT_BUTTON_EVT_CLICK, body);
|
||||
}
|
||||
|
||||
/**
|
||||
* Do something when a pin is released.
|
||||
* @param name the pin that needs to be released, eg: TouchPin.P0
|
||||
* @param body the code to run when the pin is released
|
||||
*/
|
||||
//% help=input/on-pin-released weight=6 blockGap=16
|
||||
//% blockId=device_pin_released block="on pin %NAME|released"
|
||||
//% advanced=true
|
||||
//% group="Events"
|
||||
//% deprecated=true
|
||||
void onPinReleased(TouchPin name, Action body) {
|
||||
auto pin = getPin((int)name);
|
||||
if (!pin) return;
|
||||
|
||||
// Forces the PIN to switch to makey-makey style detection.
|
||||
pin->isTouched();
|
||||
registerWithDal((int)name, MICROBIT_BUTTON_EVT_UP, body);
|
||||
}
|
||||
|
||||
/**
|
||||
* Get the pin state (pressed or not). Requires to hold the ground to close the circuit.
|
||||
* @param name pin used to detect the touch, eg: TouchPin.P0
|
||||
|
||||
@ -124,6 +124,7 @@ namespace pins {
|
||||
//% blockId=device_get_digital_pin block="digital read|pin %name" blockGap=8
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Digital"
|
||||
int digitalReadPin(DigitalPin name) {
|
||||
PINREAD(getDigitalValue());
|
||||
}
|
||||
@ -138,6 +139,7 @@ namespace pins {
|
||||
//% value.min=0 value.max=1
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Digital"
|
||||
void digitalWritePin(DigitalPin name, int value) {
|
||||
PINOP(setDigitalValue(value));
|
||||
}
|
||||
@ -150,6 +152,7 @@ namespace pins {
|
||||
//% blockId=device_get_analog_pin block="analog read|pin %name" blockGap="8"
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Analog"
|
||||
int analogReadPin(AnalogPin name) {
|
||||
PINREAD(getAnalogValue());
|
||||
}
|
||||
@ -164,6 +167,7 @@ namespace pins {
|
||||
//% value.min=0 value.max=1023
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Analog"
|
||||
void analogWritePin(AnalogPin name, int value) {
|
||||
PINOP(setAnalogValue(value));
|
||||
}
|
||||
@ -178,6 +182,7 @@ namespace pins {
|
||||
//% blockId=device_set_analog_period block="analog set period|pin %pin|to (µs)%micros"
|
||||
//% pin.fieldEditor="gridpicker" pin.fieldOptions.columns=4
|
||||
//% pin.fieldOptions.tooltips="false"
|
||||
//% group="Analog"
|
||||
void analogSetPeriod(AnalogPin name, int micros) {
|
||||
PINOP(setAnalogPeriodUs(micros));
|
||||
}
|
||||
@ -191,6 +196,7 @@ namespace pins {
|
||||
//% blockId=pins_on_pulsed block="on|pin %pin|pulsed %pulse"
|
||||
//% pin.fieldEditor="gridpicker" pin.fieldOptions.columns=4
|
||||
//% pin.fieldOptions.tooltips="false" pin.fieldOptions.width="250"
|
||||
//% group="Pulse"
|
||||
void onPulsed(DigitalPin name, PulseValue pulse, Action body) {
|
||||
MicroBitPin* pin = getPin((int)name);
|
||||
if (!pin) return;
|
||||
@ -205,6 +211,7 @@ namespace pins {
|
||||
//% help=pins/pulse-duration advanced=true
|
||||
//% blockId=pins_pulse_duration block="pulse duration (µs)"
|
||||
//% weight=21 blockGap=8
|
||||
//% group="Pulse"
|
||||
int pulseDuration() {
|
||||
return pxt::lastEvent.timestamp;
|
||||
}
|
||||
@ -220,6 +227,7 @@ namespace pins {
|
||||
//% help=pins/pulse-in
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Pulse"
|
||||
int pulseIn(DigitalPin name, PulseValue value, int maxDuration = 2000000) {
|
||||
MicroBitPin* pin = getPin((int)name);
|
||||
if (!pin) return 0;
|
||||
@ -275,6 +283,7 @@ namespace pins {
|
||||
//% value.min=0 value.max=180
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Servo"
|
||||
void servoWritePin(AnalogPin name, int value) {
|
||||
PINOP(setServoValue(value));
|
||||
}
|
||||
@ -283,6 +292,7 @@ namespace pins {
|
||||
* Specifies that a continuous servo is connected.
|
||||
*/
|
||||
//%
|
||||
//% group="Servo"
|
||||
void servoSetContinuous(AnalogPin name, bool value) {
|
||||
// handled in simulator
|
||||
}
|
||||
@ -296,6 +306,7 @@ namespace pins {
|
||||
//% blockId=device_set_servo_pulse block="servo set pulse|pin %value|to (µs) %micros"
|
||||
//% value.fieldEditor="gridpicker" value.fieldOptions.columns=4
|
||||
//% value.fieldOptions.tooltips="false" value.fieldOptions.width="250"
|
||||
//% group="Servo"
|
||||
void servoSetPulse(AnalogPin name, int micros) {
|
||||
fixMotorIssue(name);
|
||||
PINOP(setServoPulseUs(micros));
|
||||
@ -316,6 +327,7 @@ namespace pins {
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% blockHidden=true
|
||||
//% group="Pitch"
|
||||
void analogSetPitchPin(AnalogPin name) {
|
||||
pitchPin = getPin((int)name);
|
||||
pitchPin2 = NULL;
|
||||
@ -339,6 +351,7 @@ namespace pins {
|
||||
//% help=pins/analog-set-pitch-volume weight=3 advanced=true
|
||||
//% volume.min=0 volume.max=255
|
||||
//% blockHidden=true
|
||||
//% group="Pitch"
|
||||
void analogSetPitchVolume(int volume) {
|
||||
pitchVolume = max(0, min(0xff, volume));
|
||||
|
||||
@ -355,6 +368,7 @@ namespace pins {
|
||||
//% blockId=device_analog_pitch_volume block="analog pitch volume"
|
||||
//% help=pins/analog-pitch-volume weight=3 advanced=true
|
||||
//% blockHidden=true
|
||||
//% group="Pitch"
|
||||
int analogPitchVolume() {
|
||||
return pitchVolume;
|
||||
}
|
||||
@ -367,6 +381,7 @@ namespace pins {
|
||||
//% blockId=device_analog_pitch block="analog pitch %frequency|for (ms) %ms"
|
||||
//% help=pins/analog-pitch weight=4 async advanced=true blockGap=8
|
||||
//% blockHidden=true
|
||||
//% group="Pitch"
|
||||
void analogPitch(int frequency, int ms) {
|
||||
// init pins if needed
|
||||
if (NULL == pitchPin) {
|
||||
@ -402,6 +417,7 @@ namespace pins {
|
||||
//% blockId=device_set_pull block="set pull|pin %pin|to %pull"
|
||||
//% pin.fieldEditor="gridpicker" pin.fieldOptions.columns=4
|
||||
//% pin.fieldOptions.tooltips="false" pin.fieldOptions.width="250"
|
||||
//% group="Digital"
|
||||
void setPull(DigitalPin name, PinPullMode pull) {
|
||||
#if MICROBIT_CODAL
|
||||
codal::PullMode m = pull == PinPullMode::PullDown
|
||||
@ -428,6 +444,7 @@ namespace pins {
|
||||
//% blockId=device_set_pin_events block="set pin %pin|to emit %type|events"
|
||||
//% pin.fieldEditor="gridpicker" pin.fieldOptions.columns=4
|
||||
//% pin.fieldOptions.tooltips="false" pin.fieldOptions.width="250"
|
||||
//% group="Digital"
|
||||
void setEvents(DigitalPin name, PinEventType type) {
|
||||
getPin((int)name)->eventOn((int)type);
|
||||
}
|
||||
@ -467,6 +484,7 @@ namespace pins {
|
||||
* Read `size` bytes from a 7-bit I2C `address`.
|
||||
*/
|
||||
//%
|
||||
//% group="i2c"
|
||||
Buffer i2cReadBuffer(int address, int size, bool repeat = false)
|
||||
{
|
||||
Buffer buf = createBuffer(size);
|
||||
@ -478,6 +496,7 @@ namespace pins {
|
||||
* Write bytes to a 7-bit I2C `address`.
|
||||
*/
|
||||
//%
|
||||
//% group="i2c"
|
||||
int i2cWriteBuffer(int address, Buffer buf, bool repeat = false)
|
||||
{
|
||||
return uBit.i2c.write(address << 1, (BUFFER_TYPE)buf->data, buf->length, repeat);
|
||||
@ -496,6 +515,7 @@ namespace pins {
|
||||
*/
|
||||
//% help=pins/spi-write weight=5 advanced=true
|
||||
//% blockId=spi_write block="spi write %value"
|
||||
//% group="spi"
|
||||
int spiWrite(int value) {
|
||||
auto p = allocSPI();
|
||||
return p->write(value);
|
||||
@ -507,6 +527,7 @@ namespace pins {
|
||||
* @param response Data received from the SPI slave (can be null)
|
||||
*/
|
||||
//% help=pins/spi-transfer argsNullable
|
||||
//% group="spi"
|
||||
void spiTransfer(Buffer command, Buffer response) {
|
||||
if (!command && !response)
|
||||
target_panic(PANIC_INVALID_ARGUMENT);
|
||||
@ -531,6 +552,7 @@ namespace pins {
|
||||
*/
|
||||
//% help=pins/spi-frequency weight=4 advanced=true
|
||||
//% blockId=spi_frequency block="spi frequency %frequency"
|
||||
//% group="spi"
|
||||
void spiFrequency(int frequency) {
|
||||
auto p = allocSPI();
|
||||
p->frequency(frequency);
|
||||
@ -543,6 +565,7 @@ namespace pins {
|
||||
*/
|
||||
//% help=pins/spi-format weight=3 advanced=true
|
||||
//% blockId=spi_format block="spi format|bits %bits|mode %mode"
|
||||
//% group="spi"
|
||||
void spiFormat(int bits, int mode) {
|
||||
auto p = allocSPI();
|
||||
p->format(bits, mode);
|
||||
@ -566,6 +589,7 @@ namespace pins {
|
||||
//% miso.fieldOptions.tooltips="false" miso.fieldOptions.width="250"
|
||||
//% sck.fieldEditor="gridpicker" sck.fieldOptions.columns=4
|
||||
//% sck.fieldOptions.tooltips="false" sck.fieldOptions.width="250"
|
||||
//% group="spi"
|
||||
void spiPins(DigitalPin mosi, DigitalPin miso, DigitalPin sck) {
|
||||
if (NULL != spi) {
|
||||
delete spi;
|
||||
@ -578,6 +602,7 @@ namespace pins {
|
||||
* Mounts a push button on the given pin
|
||||
*/
|
||||
//% help=pins/push-button advanced=true
|
||||
//% group="Digital"
|
||||
void pushButton(DigitalPin pin) {
|
||||
new MicroBitButton((PinName)getPin((int)(pin))->name, (int)pin, MICROBIT_BUTTON_ALL_EVENTS, PinMode::PullUp);
|
||||
}
|
||||
@ -592,6 +617,7 @@ namespace pins {
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% weight=1
|
||||
//% blockHidden=true
|
||||
//% group="Pitch"
|
||||
void setAudioPin(AnalogPin name) {
|
||||
#if MICROBIT_CODAL
|
||||
uBit.audio.setPin(*getPin((int)name));
|
||||
|
||||
@ -3,6 +3,8 @@
|
||||
*/
|
||||
//% color=#A80000 weight=30 icon="\uf140"
|
||||
//% advanced=true
|
||||
//% groups=['Analog', 'Digital', 'Servos', 'Pulse', 'Pitch', 'i2c', 'spi']
|
||||
|
||||
namespace pins {
|
||||
/**
|
||||
* Map a number from one range to another. That is, a value of ``from low`` would get mapped to ``to low``, a value of ``from high`` to ``to high``, values in-between to values in-between, etc.
|
||||
@ -14,6 +16,7 @@ namespace pins {
|
||||
*/
|
||||
//% help=pins/map weight=23
|
||||
//% blockId=pin_map block="map %value|from low %fromLow|from high %fromHigh|to low %toLow|to high %toHigh"
|
||||
//% deprecated=true
|
||||
export function map(value: number, fromLow: number, fromHigh: number, toLow: number, toHigh: number): number {
|
||||
return ((value - fromLow) * (toHigh - toLow)) / (fromHigh - fromLow) + toLow;
|
||||
}
|
||||
@ -23,6 +26,7 @@ namespace pins {
|
||||
*/
|
||||
//% help=pins/i2c-read-number blockGap=8 advanced=true
|
||||
//% blockId=pins_i2c_readnumber block="i2c read number|at address %address|of format %format|repeated %repeat" weight=7
|
||||
//% group="i2c"
|
||||
export function i2cReadNumber(address: number, format: NumberFormat, repeated?: boolean): number {
|
||||
let buf = pins.i2cReadBuffer(address, pins.sizeOf(format), repeated)
|
||||
return buf.getNumber(format, 0)
|
||||
@ -33,6 +37,7 @@ namespace pins {
|
||||
*/
|
||||
//% help=pins/i2c-write-number blockGap=8 advanced=true
|
||||
//% blockId=i2c_writenumber block="i2c write number|at address %address|with value %value|of format %format|repeated %repeat" weight=6
|
||||
//% group="i2c"
|
||||
export function i2cWriteNumber(address: number, value: number, format: NumberFormat, repeated?: boolean): void {
|
||||
let buf = createBuffer(pins.sizeOf(format))
|
||||
buf.setNumber(format, 0, value)
|
||||
|
||||
@ -116,6 +116,7 @@
|
||||
"pairing_mode": 1,
|
||||
"private_addressing": 0,
|
||||
"open": 1,
|
||||
"partial_flashing": 1,
|
||||
"security_level": null,
|
||||
"whitelist": 1,
|
||||
"advertising_timeout": 0,
|
||||
@ -125,7 +126,7 @@
|
||||
"device_info_service": 0
|
||||
},
|
||||
"stack_size": 1280,
|
||||
"gatt_table_size": "0xD8",
|
||||
"gatt_table_size": "0x200",
|
||||
"panic_on_heap_full": 0,
|
||||
"debug": 0,
|
||||
"heap_debug": 0,
|
||||
@ -139,7 +140,7 @@
|
||||
"config": {
|
||||
"microbit-dal": {
|
||||
"stack_size": 2048,
|
||||
"gatt_table_size": "0x600",
|
||||
"gatt_table_size": "0x700",
|
||||
"sram_end": "0x20008000",
|
||||
"RAM_SIZE": "\"32K\""
|
||||
}
|
||||
@ -150,7 +151,7 @@
|
||||
"config": {
|
||||
"microbit-dal": {
|
||||
"stack_size": 1280,
|
||||
"gatt_table_size": "0xD8",
|
||||
"gatt_table_size": "0x200",
|
||||
"sram_end": "0x20004000",
|
||||
"RAM_SIZE": "\"16K\""
|
||||
}
|
||||
|
||||
115
libs/core/shims.d.ts
vendored
115
libs/core/shims.d.ts
vendored
@ -160,7 +160,7 @@ declare namespace basic {
|
||||
//% text.shadowOptions.toString=true
|
||||
//% expandableArgumentMode="toggle"
|
||||
//%
|
||||
//% group="LED matrix" interval.defl=80 shim=basic::showString
|
||||
//% group="LED matrix" interval.defl=150 shim=basic::showString
|
||||
function showString(text: string, interval?: int32): void;
|
||||
|
||||
/**
|
||||
@ -294,6 +294,41 @@ declare namespace input {
|
||||
//% group="States" shim=input::buttonIsPressed
|
||||
function buttonIsPressed(button: Button): boolean;
|
||||
|
||||
/**
|
||||
* Do something when a button (A, B or both A+B) is pushed down and released again.
|
||||
* @param button the button that needs to be pressed
|
||||
* @param body code to run when event is raised
|
||||
*/
|
||||
//% help=input/on-button-pressed weight=85 blockGap=16
|
||||
//% blockId=device_button_event block="on button|%NAME|pressed"
|
||||
//% parts="buttonpair"
|
||||
//% deprecated=true
|
||||
//% group="Events" shim=input::onButtonPressed
|
||||
function onButtonPressed(button: Button, body: () => void): void;
|
||||
|
||||
/**
|
||||
* Do something when a pin is touched and released again (while also touching the GND pin).
|
||||
* @param name the pin that needs to be pressed, eg: TouchPin.P0
|
||||
* @param body the code to run when the pin is pressed
|
||||
*/
|
||||
//% help=input/on-pin-pressed weight=83 blockGap=16
|
||||
//% blockId=device_pin_event block="on pin %name|pressed"
|
||||
//% group="Events"
|
||||
//% deprecated=true shim=input::onPinPressed
|
||||
function onPinPressed(name: TouchPin, body: () => void): void;
|
||||
|
||||
/**
|
||||
* Do something when a pin is released.
|
||||
* @param name the pin that needs to be released, eg: TouchPin.P0
|
||||
* @param body the code to run when the pin is released
|
||||
*/
|
||||
//% help=input/on-pin-released weight=6 blockGap=16
|
||||
//% blockId=device_pin_released block="on pin %NAME|released"
|
||||
//% advanced=true
|
||||
//% group="Events"
|
||||
//% deprecated=true shim=input::onPinReleased
|
||||
function onPinReleased(name: TouchPin, body: () => void): void;
|
||||
|
||||
/**
|
||||
* Get the pin state (pressed or not). Requires to hold the ground to close the circuit.
|
||||
* @param name pin used to detect the touch, eg: TouchPin.P0
|
||||
@ -783,7 +818,8 @@ declare namespace pins {
|
||||
//% help=pins/digital-read-pin weight=30
|
||||
//% blockId=device_get_digital_pin block="digital read|pin %name" blockGap=8
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250" shim=pins::digitalReadPin
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Digital" shim=pins::digitalReadPin
|
||||
function digitalReadPin(name: DigitalPin): int32;
|
||||
|
||||
/**
|
||||
@ -795,7 +831,8 @@ declare namespace pins {
|
||||
//% blockId=device_set_digital_pin block="digital write|pin %name|to %value"
|
||||
//% value.min=0 value.max=1
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250" shim=pins::digitalWritePin
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Digital" shim=pins::digitalWritePin
|
||||
function digitalWritePin(name: DigitalPin, value: int32): void;
|
||||
|
||||
/**
|
||||
@ -805,7 +842,8 @@ declare namespace pins {
|
||||
//% help=pins/analog-read-pin weight=25
|
||||
//% blockId=device_get_analog_pin block="analog read|pin %name" blockGap="8"
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250" shim=pins::analogReadPin
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Analog" shim=pins::analogReadPin
|
||||
function analogReadPin(name: AnalogPin): int32;
|
||||
|
||||
/**
|
||||
@ -817,7 +855,8 @@ declare namespace pins {
|
||||
//% blockId=device_set_analog_pin block="analog write|pin %name|to %value" blockGap=8
|
||||
//% value.min=0 value.max=1023
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250" shim=pins::analogWritePin
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Analog" shim=pins::analogWritePin
|
||||
function analogWritePin(name: AnalogPin, value: int32): void;
|
||||
|
||||
/**
|
||||
@ -829,7 +868,8 @@ declare namespace pins {
|
||||
//% help=pins/analog-set-period weight=23 blockGap=8
|
||||
//% blockId=device_set_analog_period block="analog set period|pin %pin|to (µs)%micros"
|
||||
//% pin.fieldEditor="gridpicker" pin.fieldOptions.columns=4
|
||||
//% pin.fieldOptions.tooltips="false" shim=pins::analogSetPeriod
|
||||
//% pin.fieldOptions.tooltips="false"
|
||||
//% group="Analog" shim=pins::analogSetPeriod
|
||||
function analogSetPeriod(name: AnalogPin, micros: int32): void;
|
||||
|
||||
/**
|
||||
@ -840,7 +880,8 @@ declare namespace pins {
|
||||
//% help=pins/on-pulsed weight=22 blockGap=16 advanced=true
|
||||
//% blockId=pins_on_pulsed block="on|pin %pin|pulsed %pulse"
|
||||
//% pin.fieldEditor="gridpicker" pin.fieldOptions.columns=4
|
||||
//% pin.fieldOptions.tooltips="false" pin.fieldOptions.width="250" shim=pins::onPulsed
|
||||
//% pin.fieldOptions.tooltips="false" pin.fieldOptions.width="250"
|
||||
//% group="Pulse" shim=pins::onPulsed
|
||||
function onPulsed(name: DigitalPin, pulse: PulseValue, body: () => void): void;
|
||||
|
||||
/**
|
||||
@ -848,7 +889,8 @@ declare namespace pins {
|
||||
*/
|
||||
//% help=pins/pulse-duration advanced=true
|
||||
//% blockId=pins_pulse_duration block="pulse duration (µs)"
|
||||
//% weight=21 blockGap=8 shim=pins::pulseDuration
|
||||
//% weight=21 blockGap=8
|
||||
//% group="Pulse" shim=pins::pulseDuration
|
||||
function pulseDuration(): int32;
|
||||
|
||||
/**
|
||||
@ -861,7 +903,8 @@ declare namespace pins {
|
||||
//% weight=20 advanced=true
|
||||
//% help=pins/pulse-in
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250" maxDuration.defl=2000000 shim=pins::pulseIn
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Pulse" maxDuration.defl=2000000 shim=pins::pulseIn
|
||||
function pulseIn(name: DigitalPin, value: PulseValue, maxDuration?: int32): int32;
|
||||
|
||||
/**
|
||||
@ -874,13 +917,15 @@ declare namespace pins {
|
||||
//% parts=microservo trackArgs=0
|
||||
//% value.min=0 value.max=180
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250" shim=pins::servoWritePin
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% group="Servo" shim=pins::servoWritePin
|
||||
function servoWritePin(name: AnalogPin, value: int32): void;
|
||||
|
||||
/**
|
||||
* Specifies that a continuous servo is connected.
|
||||
*/
|
||||
//% shim=pins::servoSetContinuous
|
||||
//%
|
||||
//% group="Servo" shim=pins::servoSetContinuous
|
||||
function servoSetContinuous(name: AnalogPin, value: boolean): void;
|
||||
|
||||
/**
|
||||
@ -891,7 +936,8 @@ declare namespace pins {
|
||||
//% help=pins/servo-set-pulse weight=19
|
||||
//% blockId=device_set_servo_pulse block="servo set pulse|pin %value|to (µs) %micros"
|
||||
//% value.fieldEditor="gridpicker" value.fieldOptions.columns=4
|
||||
//% value.fieldOptions.tooltips="false" value.fieldOptions.width="250" shim=pins::servoSetPulse
|
||||
//% value.fieldOptions.tooltips="false" value.fieldOptions.width="250"
|
||||
//% group="Servo" shim=pins::servoSetPulse
|
||||
function servoSetPulse(name: AnalogPin, micros: int32): void;
|
||||
|
||||
/**
|
||||
@ -902,7 +948,8 @@ declare namespace pins {
|
||||
//% help=pins/analog-set-pitch-pin weight=3 advanced=true
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% blockHidden=true shim=pins::analogSetPitchPin
|
||||
//% blockHidden=true
|
||||
//% group="Pitch" shim=pins::analogSetPitchPin
|
||||
function analogSetPitchPin(name: AnalogPin): void;
|
||||
|
||||
/**
|
||||
@ -912,7 +959,8 @@ declare namespace pins {
|
||||
//% blockId=device_analog_set_pitch_volume block="analog set pitch volume $volume"
|
||||
//% help=pins/analog-set-pitch-volume weight=3 advanced=true
|
||||
//% volume.min=0 volume.max=255
|
||||
//% blockHidden=true shim=pins::analogSetPitchVolume
|
||||
//% blockHidden=true
|
||||
//% group="Pitch" shim=pins::analogSetPitchVolume
|
||||
function analogSetPitchVolume(volume: int32): void;
|
||||
|
||||
/**
|
||||
@ -920,7 +968,8 @@ declare namespace pins {
|
||||
*/
|
||||
//% blockId=device_analog_pitch_volume block="analog pitch volume"
|
||||
//% help=pins/analog-pitch-volume weight=3 advanced=true
|
||||
//% blockHidden=true shim=pins::analogPitchVolume
|
||||
//% blockHidden=true
|
||||
//% group="Pitch" shim=pins::analogPitchVolume
|
||||
function analogPitchVolume(): int32;
|
||||
|
||||
/**
|
||||
@ -930,7 +979,8 @@ declare namespace pins {
|
||||
*/
|
||||
//% blockId=device_analog_pitch block="analog pitch %frequency|for (ms) %ms"
|
||||
//% help=pins/analog-pitch weight=4 async advanced=true blockGap=8
|
||||
//% blockHidden=true shim=pins::analogPitch
|
||||
//% blockHidden=true
|
||||
//% group="Pitch" shim=pins::analogPitch
|
||||
function analogPitch(frequency: int32, ms: int32): void;
|
||||
|
||||
/**
|
||||
@ -941,7 +991,8 @@ declare namespace pins {
|
||||
//% help=pins/set-pull weight=3 advanced=true
|
||||
//% blockId=device_set_pull block="set pull|pin %pin|to %pull"
|
||||
//% pin.fieldEditor="gridpicker" pin.fieldOptions.columns=4
|
||||
//% pin.fieldOptions.tooltips="false" pin.fieldOptions.width="250" shim=pins::setPull
|
||||
//% pin.fieldOptions.tooltips="false" pin.fieldOptions.width="250"
|
||||
//% group="Digital" shim=pins::setPull
|
||||
function setPull(name: DigitalPin, pull: PinPullMode): void;
|
||||
|
||||
/**
|
||||
@ -953,7 +1004,8 @@ declare namespace pins {
|
||||
//% help=pins/set-events weight=4 advanced=true
|
||||
//% blockId=device_set_pin_events block="set pin %pin|to emit %type|events"
|
||||
//% pin.fieldEditor="gridpicker" pin.fieldOptions.columns=4
|
||||
//% pin.fieldOptions.tooltips="false" pin.fieldOptions.width="250" shim=pins::setEvents
|
||||
//% pin.fieldOptions.tooltips="false" pin.fieldOptions.width="250"
|
||||
//% group="Digital" shim=pins::setEvents
|
||||
function setEvents(name: DigitalPin, type: PinEventType): void;
|
||||
|
||||
/**
|
||||
@ -980,13 +1032,15 @@ declare namespace pins {
|
||||
/**
|
||||
* Read `size` bytes from a 7-bit I2C `address`.
|
||||
*/
|
||||
//% repeat.defl=0 shim=pins::i2cReadBuffer
|
||||
//%
|
||||
//% group="i2c" repeat.defl=0 shim=pins::i2cReadBuffer
|
||||
function i2cReadBuffer(address: int32, size: int32, repeat?: boolean): Buffer;
|
||||
|
||||
/**
|
||||
* Write bytes to a 7-bit I2C `address`.
|
||||
*/
|
||||
//% repeat.defl=0 shim=pins::i2cWriteBuffer
|
||||
//%
|
||||
//% group="i2c" repeat.defl=0 shim=pins::i2cWriteBuffer
|
||||
function i2cWriteBuffer(address: int32, buf: Buffer, repeat?: boolean): int32;
|
||||
|
||||
/**
|
||||
@ -994,7 +1048,8 @@ declare namespace pins {
|
||||
* @param value Data to be sent to the SPI slave
|
||||
*/
|
||||
//% help=pins/spi-write weight=5 advanced=true
|
||||
//% blockId=spi_write block="spi write %value" shim=pins::spiWrite
|
||||
//% blockId=spi_write block="spi write %value"
|
||||
//% group="spi" shim=pins::spiWrite
|
||||
function spiWrite(value: int32): int32;
|
||||
|
||||
/**
|
||||
@ -1002,7 +1057,8 @@ declare namespace pins {
|
||||
* @param command Data to be sent to the SPI slave (can be null)
|
||||
* @param response Data received from the SPI slave (can be null)
|
||||
*/
|
||||
//% help=pins/spi-transfer argsNullable shim=pins::spiTransfer
|
||||
//% help=pins/spi-transfer argsNullable
|
||||
//% group="spi" shim=pins::spiTransfer
|
||||
function spiTransfer(command: Buffer, response: Buffer): void;
|
||||
|
||||
/**
|
||||
@ -1010,7 +1066,8 @@ declare namespace pins {
|
||||
* @param frequency the clock frequency, eg: 1000000
|
||||
*/
|
||||
//% help=pins/spi-frequency weight=4 advanced=true
|
||||
//% blockId=spi_frequency block="spi frequency %frequency" shim=pins::spiFrequency
|
||||
//% blockId=spi_frequency block="spi frequency %frequency"
|
||||
//% group="spi" shim=pins::spiFrequency
|
||||
function spiFrequency(frequency: int32): void;
|
||||
|
||||
/**
|
||||
@ -1019,7 +1076,8 @@ declare namespace pins {
|
||||
* @param mode the mode, eg: 3
|
||||
*/
|
||||
//% help=pins/spi-format weight=3 advanced=true
|
||||
//% blockId=spi_format block="spi format|bits %bits|mode %mode" shim=pins::spiFormat
|
||||
//% blockId=spi_format block="spi format|bits %bits|mode %mode"
|
||||
//% group="spi" shim=pins::spiFormat
|
||||
function spiFormat(bits: int32, mode: int32): void;
|
||||
|
||||
/**
|
||||
@ -1033,13 +1091,15 @@ declare namespace pins {
|
||||
//% miso.fieldEditor="gridpicker" miso.fieldOptions.columns=4
|
||||
//% miso.fieldOptions.tooltips="false" miso.fieldOptions.width="250"
|
||||
//% sck.fieldEditor="gridpicker" sck.fieldOptions.columns=4
|
||||
//% sck.fieldOptions.tooltips="false" sck.fieldOptions.width="250" shim=pins::spiPins
|
||||
//% sck.fieldOptions.tooltips="false" sck.fieldOptions.width="250"
|
||||
//% group="spi" shim=pins::spiPins
|
||||
function spiPins(mosi: DigitalPin, miso: DigitalPin, sck: DigitalPin): void;
|
||||
|
||||
/**
|
||||
* Mounts a push button on the given pin
|
||||
*/
|
||||
//% help=pins/push-button advanced=true shim=pins::pushButton
|
||||
//% help=pins/push-button advanced=true
|
||||
//% group="Digital" shim=pins::pushButton
|
||||
function pushButton(pin: DigitalPin): void;
|
||||
|
||||
/**
|
||||
@ -1051,7 +1111,8 @@ declare namespace pins {
|
||||
//% name.fieldEditor="gridpicker" name.fieldOptions.columns=4
|
||||
//% name.fieldOptions.tooltips="false" name.fieldOptions.width="250"
|
||||
//% weight=1
|
||||
//% blockHidden=true shim=pins::setAudioPin
|
||||
//% blockHidden=true
|
||||
//% group="Pitch" shim=pins::setAudioPin
|
||||
function setAudioPin(name: AnalogPin): void;
|
||||
}
|
||||
|
||||
|
||||
@ -46,6 +46,6 @@
|
||||
},
|
||||
"dependencies": {
|
||||
"pxt-common-packages": "9.0.1",
|
||||
"pxt-core": "7.0.16"
|
||||
"pxt-core": "7.0.17"
|
||||
}
|
||||
}
|
||||
|
||||
@ -1873,7 +1873,7 @@ namespace pxsim.visuals {
|
||||
if (!this.board.edgeConnectorState.pins[index]) return;
|
||||
let pt = this.element.createSVGPoint();
|
||||
let xpos = (index === 0 || index === 3) ? 300 : 520;
|
||||
let vMax = (index === 0 || index === 3) ? 1 : 1032;
|
||||
let vMax = (index === 0 || index === 3) ? 1 : 1023;
|
||||
svg.buttonEvents(pin,
|
||||
// move
|
||||
ev => {
|
||||
@ -1978,8 +1978,8 @@ namespace pxsim.visuals {
|
||||
private attachABEvents() {
|
||||
const bpState = this.board.buttonPairState;
|
||||
const stateButtons: Button[] = [bpState.aBtn, bpState.bBtn];
|
||||
const elButtonOuters = this.buttonsOuter.slice(6, 8);
|
||||
const elButtons = this.buttons.slice(6, 8);
|
||||
const elButtonOuters = this.buttonsOuter.slice(0,2);
|
||||
const elButtons = this.buttons.slice(0,2);
|
||||
|
||||
elButtonOuters.forEach((btn, index) => {
|
||||
let pressedTime: number;
|
||||
@ -2015,6 +2015,7 @@ namespace pxsim.visuals {
|
||||
|
||||
private attachAPlusBEvents() {
|
||||
const bpState = this.board.buttonPairState;
|
||||
const stateButtons: Button[] = [bpState.aBtn, bpState.bBtn];
|
||||
let pressedTime: number;
|
||||
// A+B
|
||||
pointerEvents.down.forEach(evid => this.buttonsOuter[2].addEventListener(evid, ev => {
|
||||
@ -2024,6 +2025,8 @@ namespace pxsim.visuals {
|
||||
svg.fill(this.buttons[0], this.props.theme.buttonDown);
|
||||
svg.fill(this.buttons[1], this.props.theme.buttonDown);
|
||||
svg.fill(this.buttons[2], this.props.theme.buttonDown);
|
||||
this.board.bus.queue(stateButtons[0].id, DAL.MICROBIT_BUTTON_EVT_DOWN);
|
||||
this.board.bus.queue(stateButtons[1].id, DAL.MICROBIT_BUTTON_EVT_DOWN);
|
||||
this.board.bus.queue(bpState.abBtn.id, DAL.MICROBIT_BUTTON_EVT_DOWN);
|
||||
pressedTime = runtime.runningTime()
|
||||
}));
|
||||
@ -2043,6 +2046,8 @@ namespace pxsim.visuals {
|
||||
svg.fill(this.buttons[1], this.props.theme.buttonUps[1]);
|
||||
svg.fill(this.buttons[2], this.props.theme.virtualButtonUp);
|
||||
|
||||
this.board.bus.queue(stateButtons[0].id, DAL.MICROBIT_BUTTON_EVT_UP);
|
||||
this.board.bus.queue(stateButtons[1].id, DAL.MICROBIT_BUTTON_EVT_UP);
|
||||
this.board.bus.queue(bpState.abBtn.id, DAL.MICROBIT_BUTTON_EVT_UP);
|
||||
const currentTime = runtime.runningTime()
|
||||
if (currentTime - pressedTime > DAL.DEVICE_BUTTON_LONG_CLICK_TIME)
|
||||
|
||||
@ -5,6 +5,8 @@
|
||||
"51bit/SFC",
|
||||
"51bit/SmartTools",
|
||||
"51bit/dfplayermini",
|
||||
"coding4coconut/pxt-lcd128x160-st7735s",
|
||||
"coding4coconut/pxt-oled128x128-sh1107",
|
||||
"Freenove/Makecode-Extension-Starter-Kit",
|
||||
"joernalraun/pxt-remember-int",
|
||||
"KitronikLtd/pxt-kitronik-I2C-16-servo",
|
||||
|
||||
Loading…
Reference in New Issue
Block a user