pxt-calliope/libs/servo/_locales/servo-jsdoc-strings.json
Amerlander 918af4f3ac
Bump V3.0.22 (#110)
* change simulator svg

* change radio image

* Remove google fonts cdn

* change color of 'advanced' button

* font fix

* font fix 2

* display fix

* change fullsceen simulator bg

* Continuous servo

* handle continuous state

* adding shims

* update rendering for continuous servos

* fixing sim

* fix sig

* typo

* fix sim

* bump pxt

* bump pxt

* rerun travis

* Input blocks revision

- add Button and Pin event types
- merge onPinPressed & onPinReleased in new onPinEvent function
- create new onButtonEvent function

* update input blocks in docs and tests

* remove device_pin_release block

* Hide DAL.x behind Enum

* bring back deprecated blocks, but hide them

* shims and locales files

* fix input.input. typing

* remove buildpr

* bump V3

* update simulator aspect ratio

* add Loudness Block

* revoke loudness block

* Adds soundLevel

To be replaced by pxt-common-packages when DAL is updated.

* Remove P0 & P3 from AnalogPin

Co-authored-by: Juri <gitkraken@juriwolf.de>
2020-09-08 02:04:25 -07:00

14 lines
1005 B
JSON

{
"servos.Servo.maxAngle": "Gets the maximum angle for the servo",
"servos.Servo.minAngle": "Gets the minimum angle for the servo",
"servos.Servo.run": "Set the throttle on a continuous servo",
"servos.Servo.run|param|speed": "the throttle of the motor from -100% to 100%",
"servos.Servo.setAngle": "Set the servo angle",
"servos.Servo.setPulse": "Set the pulse width to the servo in microseconds",
"servos.Servo.setPulse|param|micros": "the width of the pulse in microseconds",
"servos.Servo.setRange": "Set the possible rotation range angles for the servo between 0 and 180",
"servos.Servo.setRange|param|maxAngle": "the maximum angle from 90 to 180",
"servos.Servo.setRange|param|minAngle": "the minimum angle from 0 to 90",
"servos.Servo.setStopOnNeutral": "Set a servo stop mode so it will stop when the rotation angle is in the neutral position, 90 degrees.",
"servos.Servo.stop": "Stop sending commands to the servo so that its rotation will stop at the current position."
}