Diagram and linking fixes for 'Maker Design Process' (#533)

docs/lessons/classroom-management.md

@@ -1,68 +0,0 @@
-# Classroom Management Tips
-
-## Lesson Planning
-
-### Required Materials
-
-* [@boardname@ Core Set](https://education.lego.com/enus/products/legomindstormseducationev3coreset/5003400)
-* Lesson plan
-* Student Worksheet for each activity
-* Inspirational images for each activity
-* Modeling materials already available in your classroom
-
-### How much time do you need?
-
-Each lesson is designed to take 90 minutes. If you work in shorter class periods, you can break this down into two 45 minute sessions.
-
-### Preparation
-
-It is important to establish student groups. Groups of two work well. Ensure that each student has a copy of the Student Worksheet for recording their design process, or alternatively, they can use their own preferred method for recording their design journey. They will also need the @boardname@ Core Set (one set for every two students is recommended).
-
-### Prior Learning
-
-Before beginning these Maker activities, it is recommended that students complete the lessons from the Introduction to Robotics Lesson Plan. These lessons can be found in both EV3 Lab and EV3 Programming. These tutorial lessons last between 45 - 90 minutes each, and you will need to factor this into your lesson planning.
-
-However, if you prefer a more open-ended, explorative method, you can start out with this activity and allow students to find help on their own by referring to the Robot Educator Tutorials.
-
-## The LEGO Education Maker (Design) Process #design-process
-
-### Defining the Problem
-
-It is important that students define a real problem to solve, or find a new design opportunity from the start. The “Connect” images are provided to help students think about designing their solutions. At this stage of the process, it is important that you not show examples of a final or sample solution.
-
-### Brainstorm
-
-Brainstorming is an active part of making. Some students will find it easier to explore their thoughts through tinkering (hands-on experimentation) with the LEGO bricks, and others will prefer to record sketches and notes. Group work is essential, but it is important to allow time for students to work alone before sharing their ideas with their groups.
-
-### Define the Design Criteria
-
-Discussing and reaching an agreement about the best solution to build can involve a lot of negotiation and may require different techniques that are dependent on the students’ skills. For example:
-
-* Some students draw well.
-* Others may build part of a model, and then describe what they mean.
-* Other students may be good at describing a strategy.
-
-Encourage an ethos where students can share anything, no matter how abstract it might sound. Be active during this phase and ensure that the ideas the students choose are achievable.
-
-It is important that students set clear design criteria. Once the solution to the problem has been made, the students will return to these criteria, which will then form the basis for testing how well their solution works.
-
-### Go Make
-
-Students must make one of their ideas using the LEGO set, and can use other materials if needed. If they are finding it hard to build their idea, encourage them to break problems down into smaller parts. Explain that they do not have to come up with the whole solution from the start. Remind students that this process is iterative and they must test, analyze, and revise their idea as they go.
-
-Using this Maker process does not mean you are following an inflexible set of steps. Instead, think of it as a set of practices.
-For example, brainstorming may be prominent at the beginning of the process. However, students may also need to brainstorm ideas when they are trying to figure out ways to improve their idea, or when they have a bad test result and must change a feature of their design.
-
-### Review and Revise Your Solution
-
-To help students develop their critical thinking and communication skills, you may wish to have students from one group observe and critique another group’s solution. Peer review and formative feedback helps both the students giving, and the students receiving the feedback to improve their work.
-
-### Communicate Your Solution
-
-The Student Worksheet is helpful for basic documentation of the activity. Students can also refer to it when presenting their work in front of the class. You may also wish to use the Student Worksheet as a portfolio for performance evaluations or for student self-evaluation.
-
-## Maker (Design) Process Diagram
-
-Here's a diagram to quickly illustrate the steps of the Maker (Design) Process. You can copy and print this as a poster to give to the students.
-
-![Design process diagram](/static/lessons/common/lego-maker-design-process-large.jpg)

docs/maker/security-gadget.md

@@ -40,9 +40,16 @@ This activity uses sensor inputs. You may want to try the [Use](/getting-started
 
 ## Contemplate
 
-Follow the steps of the [Maker Design Process](/lessons/classroom-management#design-process) for this lesson:
+Follow the steps of the _Maker Design Process_ for this lesson:
 
-![LEGO Education Maker Design Process](/static/lessons/common/lego-maker-design-process.jpg)
+| | |
+|-|-|
+| ![Paper sheet icon](/static/maker/design-process-icons/define-problem.png) | **Define the Problem** |
+| ![Lightbulb icon](/static/maker/design-process-icons/brainstorming.png) | **Brainstorming** |
+| ![Checkmark icon](/static/maker/design-process-icons/define-criteria.png) | **Define the Design Criteria** |
+| ![Connector icon](/static/maker/design-process-icons/go-make.png) | **Go Make** |
+| ![Redo icon](/static/maker/design-process-icons/review-revise.png) | **Review and Revise Your Solution** |
+| ![Speaker icon](/static/maker/design-process-icons/communicate.png) | **Communicate Your Solution** |
 
 ### Defining the Problem
 
@@ -132,8 +139,3 @@ forever(function () {
 ```
 
 Click **Download** and follow the instructions to get your code onto your EV3 Brick. Press the ``center`` button on the EV3 Brick to run the program.
-
-### Well done!
-
-Click [here](/examples) to try out some more projects!
-

docs/maker/sound-machine.md

@@ -39,9 +39,16 @@ This activity uses motor rotations and sensor inputs. You may want to try the [U
 
 ## Contemplate
 
-Follow the steps of the [Maker Design Process](/lessons/classroom-management#design-process) for this lesson:
+Follow the steps of the _Maker Design Process_ for this lesson:
 
-![LEGO Education Maker Design Process](/static/lessons/common/lego-maker-design-process.jpg)
+| | |
+|-|-|
+| ![Paper sheet icon](/static/maker/design-process-icons/define-problem.png) | **Define the Problem** |
+| ![Lightbulb icon](/static/maker/design-process-icons/brainstorming.png) | **Brainstorming** |
+| ![Checkmark icon](/static/maker/design-process-icons/define-criteria.png) | **Define the Design Criteria** |
+| ![Connector icon](/static/maker/design-process-icons/go-make.png) | **Go Make** |
+| ![Redo icon](/static/maker/design-process-icons/review-revise.png) | **Review and Revise Your Solution** |
+| ![Speaker icon](/static/maker/design-process-icons/communicate.png) | **Communicate Your Solution** |
 
 ### Defining the Problem
 
@@ -156,9 +163,3 @@ forever(function () {
 ```
 
 Click **Download** and follow the instructions to get your code onto your EV3 Brick. Press the ``center`` button on the EV3 Brick to run the program.
-
-### Well done!
-
-Click [here](/examples) to try out some more projects!
-
-