c_meyer/pxt-calliope
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
v0
pxt-calliope/libs/core/dal.d.ts

639 lines
23 KiB
TypeScript
Raw Permalink Normal View History

Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
// Auto-generated. Do not edit.
declare const enum DAL {
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/ExternalEvents.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_ID_BLE = 1000,
updated dal definition
2016-04-19 18:43:23 +02:00
MICROBIT_ID_BLE_UART = 1200,
MICROBIT_BLE_EVT_CONNECTED = 1,
MICROBIT_BLE_EVT_DISCONNECTED = 2,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MESEvents.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MES_REMOTE_CONTROL_ID = 1001,
MES_REMOTE_CONTROL_EVT_PLAY = 1,
MES_REMOTE_CONTROL_EVT_PAUSE = 2,
MES_REMOTE_CONTROL_EVT_STOP = 3,
MES_REMOTE_CONTROL_EVT_NEXTTRACK = 4,
MES_REMOTE_CONTROL_EVT_PREVTRACK = 5,
MES_REMOTE_CONTROL_EVT_FORWARD = 6,
MES_REMOTE_CONTROL_EVT_REWIND = 7,
MES_REMOTE_CONTROL_EVT_VOLUMEUP = 8,
MES_REMOTE_CONTROL_EVT_VOLUMEDOWN = 9,
MES_CAMERA_ID = 1002,
MES_CAMERA_EVT_LAUNCH_PHOTO_MODE = 1,
MES_CAMERA_EVT_LAUNCH_VIDEO_MODE = 2,
MES_CAMERA_EVT_TAKE_PHOTO = 3,
MES_CAMERA_EVT_START_VIDEO_CAPTURE = 4,
MES_CAMERA_EVT_STOP_VIDEO_CAPTURE = 5,
MES_CAMERA_EVT_STOP_PHOTO_MODE = 6,
MES_CAMERA_EVT_STOP_VIDEO_MODE = 7,
MES_CAMERA_EVT_TOGGLE_FRONT_REAR = 8,
MES_ALERTS_ID = 1004,
MES_ALERT_EVT_DISPLAY_TOAST = 1,
MES_ALERT_EVT_VIBRATE = 2,
MES_ALERT_EVT_PLAY_SOUND = 3,
MES_ALERT_EVT_PLAY_RINGTONE = 4,
MES_ALERT_EVT_FIND_MY_PHONE = 5,
MES_ALERT_EVT_ALARM1 = 6,
MES_ALERT_EVT_ALARM2 = 7,
MES_ALERT_EVT_ALARM3 = 8,
MES_ALERT_EVT_ALARM4 = 9,
MES_ALERT_EVT_ALARM5 = 10,
MES_ALERT_EVT_ALARM6 = 11,
MES_SIGNAL_STRENGTH_ID = 1101,
MES_SIGNAL_STRENGTH_EVT_NO_BAR = 1,
MES_SIGNAL_STRENGTH_EVT_ONE_BAR = 2,
MES_SIGNAL_STRENGTH_EVT_TWO_BAR = 3,
MES_SIGNAL_STRENGTH_EVT_THREE_BAR = 4,
MES_SIGNAL_STRENGTH_EVT_FOUR_BAR = 5,
MES_DEVICE_INFO_ID = 1103,
MES_DEVICE_ORIENTATION_LANDSCAPE = 1,
MES_DEVICE_ORIENTATION_PORTRAIT = 2,
MES_DEVICE_GESTURE_NONE = 3,
MES_DEVICE_GESTURE_DEVICE_SHAKEN = 4,
MES_DEVICE_DISPLAY_OFF = 5,
MES_DEVICE_DISPLAY_ON = 6,
MES_DEVICE_INCOMING_CALL = 7,
MES_DEVICE_INCOMING_MESSAGE = 8,
MES_DPAD_CONTROLLER_ID = 1104,
MES_DPAD_BUTTON_A_DOWN = 1,
MES_DPAD_BUTTON_A_UP = 2,
MES_DPAD_BUTTON_B_DOWN = 3,
MES_DPAD_BUTTON_B_UP = 4,
MES_DPAD_BUTTON_C_DOWN = 5,
MES_DPAD_BUTTON_C_UP = 6,
MES_DPAD_BUTTON_D_DOWN = 7,
MES_DPAD_BUTTON_D_UP = 8,
MES_DPAD_BUTTON_1_DOWN = 9,
MES_DPAD_BUTTON_1_UP = 10,
MES_DPAD_BUTTON_2_DOWN = 11,
MES_DPAD_BUTTON_2_UP = 12,
MES_DPAD_BUTTON_3_DOWN = 13,
MES_DPAD_BUTTON_3_UP = 14,
MES_DPAD_BUTTON_4_DOWN = 15,
MES_DPAD_BUTTON_4_UP = 16,
MES_BROADCAST_GENERAL_ID = 2000,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitAccelerometerService.h
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitBLEManager.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_BLE_PAIR_REQUEST = 0x01,
MICROBIT_BLE_PAIR_COMPLETE = 0x02,
MICROBIT_BLE_PAIR_PASSCODE = 0x04,
MICROBIT_BLE_PAIR_SUCCESSFUL = 0x08,
MICROBIT_BLE_PAIRING_TIMEOUT = 90,
MICROBIT_BLE_POWER_LEVELS = 8,
MICROBIT_BLE_MAXIMUM_BONDS = 4,
refreshed dal definitions
2017-02-02 12:18:18 +01:00
MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL = 400,
MICROBIT_BLE_EDDYSTONE_DEFAULT_POWER = 0xF0,
MICROBIT_BLE_DISCONNECT_AFTER_PAIRING_DELAY = 500,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitButtonService.h
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitDFUService.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_DFU_OPCODE_START_DFU = 1,
MICROBIT_DFU_HISTOGRAM_WIDTH = 5,
MICROBIT_DFU_HISTOGRAM_HEIGHT = 5,
refreshed dal definitions
2017-02-02 12:18:18 +01:00
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitEddystone.h
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitEventService.h
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitIOPinService.h
upgraded to lancaster 2.0.0.rc3 (core 0.1.9) added radio.send/receive string
2016-05-12 21:35:40 +02:00
MICROBIT_IO_PIN_SERVICE_PINCOUNT = 19,
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_IO_PIN_SERVICE_DATA_SIZE = 10,
fixing pin mapping
2016-09-30 00:20:45 +02:00
MICROBIT_PWM_PIN_SERVICE_DATA_SIZE = 2,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitLEDService.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_BLE_MAXIMUM_SCROLLTEXT = 20,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitMagnetometerService.h
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitTemperatureService.h
// built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitUARTService.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_UART_S_DEFAULT_BUF_SIZE = 20,
MICROBIT_UART_S_EVT_DELIM_MATCH = 1,
MICROBIT_UART_S_EVT_HEAD_MATCH = 2,
MICROBIT_UART_S_EVT_RX_FULL = 3,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/core/ErrorNo.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_OK = 0,
MICROBIT_INVALID_PARAMETER = -1001,
MICROBIT_NOT_SUPPORTED = -1002,
MICROBIT_CALIBRATION_IN_PROGRESS = -1003,
MICROBIT_CALIBRATION_REQUIRED = -1004,
MICROBIT_NO_RESOURCES = -1005,
MICROBIT_BUSY = -1006,
MICROBIT_CANCELLED = -1007,
MICROBIT_I2C_ERROR = -1010,
MICROBIT_SERIAL_IN_USE = -1011,
MICROBIT_NO_DATA = -1012,
MICROBIT_OOM = 20,
MICROBIT_HEAP_ERROR = 30,
MICROBIT_NULL_DEREFERENCE = 40,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/core/EventModel.h
// built/yt/yotta_modules/microbit-dal/inc/core/MemberFunctionCallback.h
// built/yt/yotta_modules/microbit-dal/inc/core/MicroBitCompat.h
// built/yt/yotta_modules/microbit-dal/inc/core/MicroBitComponent.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_ID_BUTTON_A = 1,
MICROBIT_ID_BUTTON_B = 2,
MICROBIT_ID_BUTTON_RESET = 3,
MICROBIT_ID_ACCELEROMETER = 4,
MICROBIT_ID_COMPASS = 5,
MICROBIT_ID_DISPLAY = 6,
MICROBIT_ID_IO_P0 = 7,
MICROBIT_ID_IO_P1 = 8,
MICROBIT_ID_IO_P2 = 9,
MICROBIT_ID_IO_P3 = 10,
MICROBIT_ID_IO_P4 = 11,
MICROBIT_ID_IO_P5 = 12,
MICROBIT_ID_IO_P6 = 13,
MICROBIT_ID_IO_P7 = 14,
refreshed dal definitions
2017-02-02 12:18:18 +01:00
MICROBIT_ID_IO_P8 = 15,
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_ID_IO_P9 = 16,
MICROBIT_ID_IO_P10 = 17,
MICROBIT_ID_IO_P11 = 18,
refreshed dal definitions
2017-02-02 12:18:18 +01:00
MICROBIT_ID_IO_P12 = 19,
MICROBIT_ID_IO_P13 = 20,
MICROBIT_ID_IO_P14 = 21,
MICROBIT_ID_IO_P15 = 22,
MICROBIT_ID_IO_P16 = 23,
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_ID_IO_P19 = 24,
MICROBIT_ID_IO_P20 = 25,
refreshed dal definitions
2017-02-02 12:18:18 +01:00
MICROBIT_ID_IO_P21 = 50,
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_ID_BUTTON_AB = 26,
MICROBIT_ID_GESTURE = 27,
MICROBIT_ID_THERMOMETER = 28,
MICROBIT_ID_RADIO = 29,
MICROBIT_ID_RADIO_DATA_READY = 30,
MICROBIT_ID_MULTIBUTTON_ATTACH = 31,
MICROBIT_ID_SERIAL = 32,
MICROBIT_ID_MESSAGE_BUS_LISTENER = 1021,
MICROBIT_ID_NOTIFY_ONE = 1022,
MICROBIT_ID_NOTIFY = 1023,
MICROBIT_COMPONENT_RUNNING = 0x01,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/core/MicroBitDevice.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_NAME_LENGTH = 5,
MICROBIT_NAME_CODE_LETTERS = 5,
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_PANIC_ERROR_CHARS = 4,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/core/MicroBitFiber.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_SCHEDULER_RUNNING = 0x01,
MICROBIT_FIBER_FLAG_FOB = 0x01,
MICROBIT_FIBER_FLAG_PARENT = 0x02,
MICROBIT_FIBER_FLAG_CHILD = 0x04,
MICROBIT_FIBER_FLAG_DO_NOT_PAGE = 0x08,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/core/MicroBitFont.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_FONT_WIDTH = 5,
MICROBIT_FONT_HEIGHT = 5,
MICROBIT_FONT_ASCII_START = 32,
MICROBIT_FONT_ASCII_END = 126,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/core/MicroBitHeapAllocator.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_MAXIMUM_HEAPS = 2,
MICROBIT_HEAP_BLOCK_FREE = 0x80000000,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/core/MicroBitListener.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MESSAGE_BUS_LISTENER_PARAMETERISED = 0x0001,
MESSAGE_BUS_LISTENER_METHOD = 0x0002,
MESSAGE_BUS_LISTENER_BUSY = 0x0004,
MESSAGE_BUS_LISTENER_REENTRANT = 0x0008,
MESSAGE_BUS_LISTENER_QUEUE_IF_BUSY = 0x0010,
MESSAGE_BUS_LISTENER_DROP_IF_BUSY = 0x0020,
MESSAGE_BUS_LISTENER_NONBLOCKING = 0x0040,
MESSAGE_BUS_LISTENER_URGENT = 0x0080,
MESSAGE_BUS_LISTENER_DELETING = 0x8000,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/core/MicroBitSystemTimer.h
// built/yt/yotta_modules/microbit-dal/inc/core/NotifyEvents.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_DISPLAY_EVT_FREE = 1,
MICROBIT_SERIAL_EVT_TX_EMPTY = 2,
MICROBIT_UART_S_EVT_TX_EMPTY = 3,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/CalliopeRGB.h
updated for Calliope mini board rev 0.3 (2016)
2017-02-18 15:25:12 +01:00
RGB_LED_MAX_INTENSITY = 40,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/CalliopeSoundMotor.h
CALLIOPE_SM_DEFAULT_DUTY_M = 50,
CALLIOPE_SM_DEFAULT_DUTY_S = 100,
CALLIOPE_SM_DEFAULT_FREQUENCY_S = 4000,
CALLIOPE_SM_DEFAULT_SILENT_MODE = 1,
CALLIOPE_SM_PRESCALER_M = 2,
CALLIOPE_SM_PRESCALER_S = 0,
CALLIOPE_SM_PRESCALER_S_LF = 4,
CALLIOPE_SM_PERIOD_M = 100,
CALLIOPE_MIN_FREQUENCY_HZ_S_NP = 245,
CALLIOPE_MIN_FREQUENCY_HZ_S = 20,
CALLIOPE_MAX_FREQUENCY_HZ_S = 20000,
CALLIOPE_BOARD_FREQUENCY = 16000000,
// built/yt/yotta_modules/microbit-dal/inc/drivers/DynamicPwm.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
NO_PWMS = 3,
MICROBIT_DEFAULT_PWM_PERIOD = 20000,
PWM_PERSISTENCE_TRANSIENT = 1,
PWM_PERSISTENCE_PERSISTENT = 2,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitAccelerometer-bmx.h
fixing pin mapping
2016-09-30 00:20:45 +02:00
BMX055_ACC_WHOAMI = 0x00,
BMX055_ACC_D_X_LSB = 0x02,
BMX055_ACC_D_X_MSB = 0x03,
BMX055_ACC_D_Y_LSB = 0x04,
BMX055_ACC_D_Y_MSB = 0x05,
BMX055_ACC_D_Z_LSB = 0x06,
BMX055_ACC_D_Z_MSB = 0x07,
BMX055_ACC_D_TEMP = 0x08,
BMX055_ACC_INT_STATUS_0 = 0x09,
BMX055_ACC_INT_STATUS_1 = 0x0A,
BMX055_ACC_INT_STATUS_2 = 0x0B,
BMX055_ACC_INT_STATUS_3 = 0x0C,
BMX055_ACC_FIFO_STATUS = 0x0E,
BMX055_ACC_PMU_RANGE = 0x0F,
BMX055_ACC_PMU_BW = 0x10,
BMX055_ACC_PMU_LPW = 0x11,
BMX055_ACC_PMU_LOW_POWER = 0x12,
BMX055_ACC_D_HBW = 0x13,
BMX055_ACC_BGW_SOFTRESET = 0x14,
BMX055_ACC_INT_EN_0 = 0x16,
BMX055_ACC_INT_EN_1 = 0x17,
BMX055_ACC_INT_EN_2 = 0x18,
BMX055_ACC_INT_MAP_0 = 0x19,
BMX055_ACC_INT_MAP_1 = 0x1A,
BMX055_ACC_INT_MAP_2 = 0x1B,
BMX055_ACC_INT_SRC = 0x1E,
BMX055_ACC_INT_OUT_CTRL = 0x20,
BMX055_ACC_INT_RST_LATCH = 0x21,
BMX055_ACC_INT_0 = 0x22,
BMX055_ACC_INT_1 = 0x23,
BMX055_ACC_INT_2 = 0x24,
BMX055_ACC_INT_3 = 0x25,
BMX055_ACC_INT_4 = 0x26,
BMX055_ACC_INT_5 = 0x27,
BMX055_ACC_INT_6 = 0x28,
BMX055_ACC_INT_7 = 0x29,
BMX055_ACC_INT_8 = 0x2A,
BMX055_ACC_INT_9 = 0x2B,
BMX055_ACC_INT_A = 0x2C,
BMX055_ACC_INT_B = 0x2D,
BMX055_ACC_INT_C = 0x2E,
BMX055_ACC_INT_D = 0x2F,
BMX055_ACC_FIFO_CONFIG_0 = 0x30,
BMX055_ACC_PMU_SELF_TEST = 0x32,
BMX055_ACC_TRIM_NVM_CTRL = 0x33,
BMX055_ACC_BGW_SPI3_WDT = 0x34,
BMX055_ACC_OFC_CTRL = 0x36,
BMX055_ACC_OFC_SETTING = 0x37,
BMX055_ACC_OFC_OFFSET_X = 0x38,
BMX055_ACC_OFC_OFFSET_Y = 0x39,
BMX055_ACC_OFC_OFFSET_Z = 0x3A,
BMX055_ACC_TRIM_GPO = 0x3B,
BMX055_ACC_TRIM_GP1 = 0x3C,
BMX055_ACC_FIFO_CONFIG_1 = 0x3E,
BMX055_ACC_FIFO_DATA = 0x3F,
BMX055_GYRO_WHOAMI = 0x00,
BMX055_GYRO_RATE_X_LSB = 0x02,
BMX055_GYRO_RATE_X_MSB = 0x03,
BMX055_GYRO_RATE_Y_LSB = 0x04,
BMX055_GYRO_RATE_Y_MSB = 0x05,
BMX055_GYRO_RATE_Z_LSB = 0x06,
BMX055_GYRO_RATE_Z_MSB = 0x07,
BMX055_GYRO_INT_STATUS_0 = 0x09,
BMX055_GYRO_INT_STATUS_1 = 0x0A,
BMX055_GYRO_INT_STATUS_2 = 0x0B,
BMX055_GYRO_INT_STATUS_3 = 0x0C,
BMX055_GYRO_FIFO_STATUS = 0x0E,
BMX055_GYRO_RANGE = 0x0F,
BMX055_GYRO_BW = 0x10,
BMX055_GYRO_LPM1 = 0x11,
BMX055_GYRO_LPM2 = 0x12,
BMX055_GYRO_RATE_HBW = 0x13,
BMX055_GYRO_BGW_SOFTRESET = 0x14,
BMX055_GYRO_INT_EN_0 = 0x15,
BMX055_GYRO_INT_EN_1 = 0x16,
BMX055_GYRO_INT_MAP_0 = 0x17,
BMX055_GYRO_INT_MAP_1 = 0x18,
BMX055_GYRO_INT_MAP_2 = 0x19,
BMX055_GYRO_INT_SRC_1 = 0x1A,
BMX055_GYRO_INT_SRC_2 = 0x1B,
BMX055_GYRO_INT_SRC_3 = 0x1C,
BMX055_GYRO_FIFO_EN = 0x1E,
BMX055_GYRO_INT_RST_LATCH = 0x21,
BMX055_GYRO_HIGH_TH_X = 0x22,
BMX055_GYRO_HIGH_DUR_X = 0x23,
BMX055_GYRO_HIGH_TH_Y = 0x24,
BMX055_GYRO_HIGH_DUR_Y = 0x25,
BMX055_GYRO_HIGH_TH_Z = 0x26,
BMX055_GYRO_HIGH_DUR_Z = 0x27,
BMX055_GYRO_SOC = 0x31,
BMX055_GYRO_A_FOC = 0x32,
BMX055_GYRO_TRIM_NVM_CTRL = 0x33,
BMX055_GYRO_BGW_SPI3_WDT = 0x34,
BMX055_GYRO_OFC1 = 0x36,
BMX055_GYRO_OFC2 = 0x37,
BMX055_GYRO_OFC3 = 0x38,
BMX055_GYRO_OFC4 = 0x39,
BMX055_GYRO_TRIM_GP0 = 0x3A,
BMX055_GYRO_TRIM_GP1 = 0x3B,
BMX055_GYRO_BIST = 0x3C,
BMX055_GYRO_FIFO_CONFIG_0 = 0x3D,
BMX055_GYRO_FIFO_CONFIG_1 = 0x3E,
BMX055_MAG_WHOAMI = 0x40,
BMX055_MAG_Reserved = 0x41,
BMX055_MAG_XOUT_LSB = 0x42,
BMX055_MAG_XOUT_MSB = 0x43,
BMX055_MAG_YOUT_LSB = 0x44,
BMX055_MAG_YOUT_MSB = 0x45,
BMX055_MAG_ZOUT_LSB = 0x46,
BMX055_MAG_ZOUT_MSB = 0x47,
BMX055_MAG_ROUT_LSB = 0x48,
BMX055_MAG_ROUT_MSB = 0x49,
BMX055_MAG_INT_STATUS = 0x4A,
BMX055_MAG_PWR_CNTL1 = 0x4B,
BMX055_MAG_PWR_CNTL2 = 0x4C,
BMX055_MAG_INT_EN_1 = 0x4D,
BMX055_MAG_INT_EN_2 = 0x4E,
BMX055_MAG_LOW_THS = 0x4F,
BMX055_MAG_HIGH_THS = 0x50,
BMX055_MAG_REP_XY = 0x51,
BMX055_MAG_REP_Z = 0x52,
BMM050_DIG_X1 = 0x5D,
BMM050_DIG_Y1 = 0x5E,
BMM050_DIG_Z4_LSB = 0x62,
BMM050_DIG_Z4_MSB = 0x63,
BMM050_DIG_X2 = 0x64,
BMM050_DIG_Y2 = 0x65,
BMM050_DIG_Z2_LSB = 0x68,
BMM050_DIG_Z2_MSB = 0x69,
BMM050_DIG_Z1_LSB = 0x6A,
BMM050_DIG_Z1_MSB = 0x6B,
BMM050_DIG_XYZ1_LSB = 0x6C,
BMM050_DIG_XYZ1_MSB = 0x6D,
BMM050_DIG_Z3_LSB = 0x6E,
BMM050_DIG_Z3_MSB = 0x6F,
BMM050_DIG_XY2 = 0x70,
BMM050_DIG_XY1 = 0x71,
BMX055_ACC_ADDRESS = 0x18,
BMX055_GYRO_ADDRESS = 0x68,
BMX055_MAG_ADDRESS = 0x10,
MS5637_ADDRESS = 0x76,
AFS_2G = 0x03,
AFS_4G = 0x05,
AFS_8G = 0x08,
AFS_16G = 0x0C,
ABW_8Hz = 0,
ABW_16Hz = 1,
ABW_31Hz = 2,
ABW_63Hz = 3,
ABW_125Hz = 4,
ABW_250Hz = 5,
ABW_500Hz = 6,
ABW_100Hz = 7,
GFS_2000DPS = 0,
GFS_1000DPS = 1,
GFS_500DPS = 2,
GFS_250DPS = 3,
GFS_125DPS = 4,
G_2000Hz523Hz = 0,
G_2000Hz230Hz = 1,
G_1000Hz116Hz = 2,
G_400Hz47Hz = 3,
G_200Hz23Hz = 4,
G_100Hz12Hz = 5,
G_200Hz64Hz = 6,
G_100Hz32Hz = 7,
MODR_10Hz = 0,
MODR_2Hz = 1,
MODR_6Hz = 2,
MODR_8Hz = 3,
MODR_15Hz = 4,
MODR_20Hz = 5,
MODR_25Hz = 6,
MODR_30Hz = 7,
lowPower = 0,
Regular = 1,
enhancedRegular = 2,
highAccuracy = 3,
ADC_256 = 0x00,
ADC_512 = 0x02,
ADC_1024 = 0x04,
ADC_2048 = 0x06,
ADC_4096 = 0x08,
ADC_8192 = 0x0A,
ADC_D1 = 0x40,
ADC_D2 = 0x50,
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_ACCEL_PITCH_ROLL_VALID = 0x02,
MICROBIT_ACCEL_ADDED_TO_IDLE = 0x04,
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MMA8653_STATUS = 0x00,
MMA8653_OUT_X_MSB = 0x01,
MMA8653_WHOAMI = 0x0D,
MMA8653_XYZ_DATA_CFG = 0x0E,
MMA8653_CTRL_REG1 = 0x2A,
MMA8653_CTRL_REG2 = 0x2B,
MMA8653_CTRL_REG3 = 0x2C,
MMA8653_CTRL_REG4 = 0x2D,
MMA8653_CTRL_REG5 = 0x2E,
MMA8653_WHOAMI_VAL = 0x5A,
MMA8653_SAMPLE_RANGES = 3,
MMA8653_SAMPLE_RATES = 8,
MICROBIT_ACCELEROMETER_EVT_DATA_UPDATE = 1,
upgraded to lancaster 2.0.0.rc3 (core 0.1.9) added radio.send/receive string
2016-05-12 21:35:40 +02:00
MICROBIT_ACCELEROMETER_EVT_NONE = 0,
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_ACCELEROMETER_EVT_TILT_UP = 1,
MICROBIT_ACCELEROMETER_EVT_TILT_DOWN = 2,
MICROBIT_ACCELEROMETER_EVT_TILT_LEFT = 3,
MICROBIT_ACCELEROMETER_EVT_TILT_RIGHT = 4,
MICROBIT_ACCELEROMETER_EVT_FACE_UP = 5,
MICROBIT_ACCELEROMETER_EVT_FACE_DOWN = 6,
MICROBIT_ACCELEROMETER_EVT_FREEFALL = 7,
MICROBIT_ACCELEROMETER_EVT_3G = 8,
MICROBIT_ACCELEROMETER_EVT_6G = 9,
MICROBIT_ACCELEROMETER_EVT_8G = 10,
MICROBIT_ACCELEROMETER_EVT_SHAKE = 11,
MICROBIT_ACCELEROMETER_REST_TOLERANCE = 200,
MICROBIT_ACCELEROMETER_TILT_TOLERANCE = 200,
MICROBIT_ACCELEROMETER_FREEFALL_TOLERANCE = 400,
full support for setPull
2016-06-04 08:15:51 +02:00
MICROBIT_ACCELEROMETER_SHAKE_TOLERANCE = 400,
add handling of gestures (we only have 2g, 6g ... no 3g), add mac/idea ignored files
2016-10-18 15:44:49 +02:00
MICROBIT_ACCELEROMETER_2G_TOLERANCE = 2048,
fix naming and pin selection
2016-11-10 21:00:03 +01:00
MICROBIT_ACCELEROMETER_3G_TOLERANCE = 3072,
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_ACCELEROMETER_6G_TOLERANCE = 6144,
MICROBIT_ACCELEROMETER_8G_TOLERANCE = 8192,
full support for setPull
2016-06-04 08:15:51 +02:00
MICROBIT_ACCELEROMETER_GESTURE_DAMPING = 5,
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_ACCELEROMETER_SHAKE_DAMPING = 10,
full support for setPull
2016-06-04 08:15:51 +02:00
MICROBIT_ACCELEROMETER_SHAKE_RTX = 30,
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_ACCELEROMETER_SHAKE_COUNT_THRESHOLD = 4,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitAccelerometer.h
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitButton.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_BUTTON_EVT_DOWN = 1,
MICROBIT_BUTTON_EVT_UP = 2,
MICROBIT_BUTTON_EVT_CLICK = 3,
MICROBIT_BUTTON_EVT_LONG_CLICK = 4,
MICROBIT_BUTTON_EVT_HOLD = 5,
MICROBIT_BUTTON_EVT_DOUBLE_CLICK = 6,
MICROBIT_BUTTON_LONG_CLICK_TIME = 1000,
MICROBIT_BUTTON_HOLD_TIME = 1500,
MICROBIT_BUTTON_STATE = 1,
MICROBIT_BUTTON_STATE_HOLD_TRIGGERED = 2,
MICROBIT_BUTTON_STATE_CLICK = 4,
MICROBIT_BUTTON_STATE_LONG_CLICK = 8,
MICROBIT_BUTTON_SIGMA_MIN = 0,
MICROBIT_BUTTON_SIGMA_MAX = 12,
MICROBIT_BUTTON_SIGMA_THRESH_HI = 8,
MICROBIT_BUTTON_SIGMA_THRESH_LO = 2,
MICROBIT_BUTTON_DOUBLE_CLICK_THRESH = 50,
MICROBIT_BUTTON_SIMPLE_EVENTS = 0,
MICROBIT_BUTTON_ALL_EVENTS = 1,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitCompass.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MAG3110_DEFAULT_ADDR = 0x1D,
MAG_DR_STATUS = 0x00,
MAG_OUT_X_MSB = 0x01,
MAG_OUT_X_LSB = 0x02,
MAG_OUT_Y_MSB = 0x03,
MAG_OUT_Y_LSB = 0x04,
MAG_OUT_Z_MSB = 0x05,
MAG_OUT_Z_LSB = 0x06,
MAG_WHOAMI = 0x07,
MAG_SYSMOD = 0x08,
MAG_OFF_X_MSB = 0x09,
MAG_OFF_X_LSB = 0x0A,
MAG_OFF_Y_MSB = 0x0B,
MAG_OFF_Y_LSB = 0x0C,
MAG_OFF_Z_MSB = 0x0D,
MAG_OFF_Z_LSB = 0x0E,
MAG_DIE_TEMP = 0x0F,
MAG_CTRL_REG1 = 0x10,
MAG_CTRL_REG2 = 0x11,
MAG3110_SAMPLE_RATES = 11,
MICROBIT_COMPASS_EVT_CAL_REQUIRED = 1,
MICROBIT_COMPASS_EVT_CAL_START = 2,
MICROBIT_COMPASS_EVT_CAL_END = 3,
MICROBIT_COMPASS_EVT_DATA_UPDATE = 4,
MICROBIT_COMPASS_EVT_CONFIG_NEEDED = 5,
MICROBIT_COMPASS_EVT_CALIBRATE = 6,
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_COMPASS_STATUS_CALIBRATED = 2,
MICROBIT_COMPASS_STATUS_CALIBRATING = 4,
MICROBIT_COMPASS_STATUS_ADDED_TO_IDLE = 8,
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MAG3110_WHOAMI_VAL = 0xC4,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitCompassCalibrator.h
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitDisplay.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_DISPLAY_EVT_ANIMATION_COMPLETE = 1,
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_DISPLAY_EVT_LIGHT_SENSE = 2,
updated dal definition
2016-04-19 18:43:23 +02:00
MICROBIT_DISPLAY_DEFAULT_AUTOCLEAR = 1,
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_DISPLAY_SPACING = 1,
MICROBIT_DISPLAY_GREYSCALE_BIT_DEPTH = 8,
MICROBIT_DISPLAY_ANIMATE_DEFAULT_POS = -255,
ANIMATION_MODE_NONE = 0,
ANIMATION_MODE_STOPPED = 1,
ANIMATION_MODE_SCROLL_TEXT = 2,
ANIMATION_MODE_PRINT_TEXT = 3,
ANIMATION_MODE_SCROLL_IMAGE = 4,
ANIMATION_MODE_ANIMATE_IMAGE = 5,
updated dal definition
2016-04-19 18:43:23 +02:00
ANIMATION_MODE_ANIMATE_IMAGE_WITH_CLEAR = 6,
ANIMATION_MODE_PRINT_CHARACTER = 7,
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
DISPLAY_MODE_BLACK_AND_WHITE = 0,
DISPLAY_MODE_GREYSCALE = 1,
DISPLAY_MODE_BLACK_AND_WHITE_LIGHT_SENSE = 2,
MICROBIT_DISPLAY_ROTATION_0 = 0,
MICROBIT_DISPLAY_ROTATION_90 = 1,
MICROBIT_DISPLAY_ROTATION_180 = 2,
MICROBIT_DISPLAY_ROTATION_270 = 3,
refreshed dal definitions
2017-02-02 12:18:18 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitFile.h
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitFileSystem.h
MBFS_FILENAME_LENGTH = 16,
MB_READ = 0x01,
MB_WRITE = 0x02,
MB_CREAT = 0x04,
MB_APPEND = 0x08,
MB_SEEK_SET = 0x01,
MB_SEEK_END = 0x02,
MB_SEEK_CUR = 0x04,
MBFS_STATUS_INITIALISED = 0x01,
MBFS_UNUSED = 0xFFFF,
MBFS_EOF = 0xEFFF,
MBFS_DELETED = 0x0000,
MBFS_DIRECTORY_ENTRY_FREE = 0x8000,
MBFS_DIRECTORY_ENTRY_VALID = 0x4000,
MBFS_DIRECTORY_ENTRY_DIRECTORY = 0x2000,
MBFS_DIRECTORY_ENTRY_NEW = 0xffff,
MBFS_DIRECTORY_ENTRY_DELETED = 0x0000,
MBFS_BLOCK_TYPE_FILE = 1,
MBFS_BLOCK_TYPE_DIRECTORY = 2,
MBFS_BLOCK_TYPE_FILETABLE = 3,
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitFlash.h
PAGE_SIZE = 1024,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitI2C.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_I2C_MAX_RETRIES = 9,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitIO.h
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitLightSensor.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_LIGHT_SENSOR_CHAN_NUM = 3,
MICROBIT_LIGHT_SENSOR_AN_SET_TIME = 4000,
MICROBIT_LIGHT_SENSOR_TICK_PERIOD = 5,
MICROBIT_LIGHT_SENSOR_MAX_VALUE = 338,
MICROBIT_LIGHT_SENSOR_MIN_VALUE = 75,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitMatrixMaps.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
NO_CONN = 0,
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_DISPLAY_WIDTH = 5,
MICROBIT_DISPLAY_HEIGHT = 5,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitMessageBus.h
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitMultiButton.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_MULTI_BUTTON_STATE_1 = 0x01,
MICROBIT_MULTI_BUTTON_STATE_2 = 0x02,
MICROBIT_MULTI_BUTTON_HOLD_TRIGGERED_1 = 0x04,
MICROBIT_MULTI_BUTTON_HOLD_TRIGGERED_2 = 0x08,
MICROBIT_MULTI_BUTTON_SUPRESSED_1 = 0X10,
MICROBIT_MULTI_BUTTON_SUPRESSED_2 = 0x20,
MICROBIT_MULTI_BUTTON_ATTACHED = 0x40,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitPin.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
IO_STATUS_DIGITAL_IN = 0x01,
IO_STATUS_DIGITAL_OUT = 0x02,
IO_STATUS_ANALOG_IN = 0x04,
IO_STATUS_ANALOG_OUT = 0x08,
IO_STATUS_TOUCH_IN = 0x10,
upgraded to lancaster 2.0.0.rc3 (core 0.1.9) added radio.send/receive string
2016-05-12 21:35:40 +02:00
IO_STATUS_EVENT_ON_EDGE = 0x20,
IO_STATUS_EVENT_PULSE_ON_EDGE = 0x40,
fixing pin mapping
2016-09-30 00:20:45 +02:00
IO_STATUS_EVENTBUS_ENABLED = 0x80,
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_PIN_MAX_OUTPUT = 1023,
MICROBIT_PIN_MAX_SERVO_RANGE = 180,
MICROBIT_PIN_DEFAULT_SERVO_RANGE = 2000,
MICROBIT_PIN_DEFAULT_SERVO_CENTER = 1500,
upgraded to lancaster 2.0.0.rc3 (core 0.1.9) added radio.send/receive string
2016-05-12 21:35:40 +02:00
MICROBIT_PIN_EVENT_NONE = 0,
MICROBIT_PIN_EVENT_ON_EDGE = 1,
MICROBIT_PIN_EVENT_ON_PULSE = 2,
MICROBIT_PIN_EVENT_ON_TOUCH = 3,
MICROBIT_PIN_EVT_RISE = 2,
MICROBIT_PIN_EVT_FALL = 3,
MICROBIT_PIN_EVT_PULSE_HI = 4,
MICROBIT_PIN_EVT_PULSE_LO = 5,
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
PIN_CAPABILITY_DIGITAL = 0x01,
PIN_CAPABILITY_ANALOG = 0x02,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitRadio.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_RADIO_STATUS_INITIALISED = 0x0001,
MICROBIT_RADIO_BASE_ADDRESS = 0x75626974,
MICROBIT_RADIO_DEFAULT_GROUP = 0,
MICROBIT_RADIO_DEFAULT_TX_POWER = 6,
MICROBIT_RADIO_DEFAULT_FREQUENCY = 7,
MICROBIT_RADIO_MAX_PACKET_SIZE = 32,
MICROBIT_RADIO_HEADER_SIZE = 4,
MICROBIT_RADIO_MAXIMUM_RX_BUFFERS = 4,
MICROBIT_RADIO_PROTOCOL_DATAGRAM = 1,
MICROBIT_RADIO_PROTOCOL_EVENTBUS = 2,
MICROBIT_RADIO_EVT_DATAGRAM = 1,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitRadioDatagram.h
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitRadioEvent.h
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitSerial.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_SERIAL_DEFAULT_BAUD_RATE = 115200,
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_SERIAL_DEFAULT_BUFFER_SIZE = 20,
MICROBIT_SERIAL_EVT_DELIM_MATCH = 1,
MICROBIT_SERIAL_EVT_HEAD_MATCH = 2,
MICROBIT_SERIAL_EVT_RX_FULL = 3,
MICROBIT_SERIAL_RX_IN_USE = 1,
MICROBIT_SERIAL_TX_IN_USE = 2,
MICROBIT_SERIAL_RX_BUFF_INIT = 4,
MICROBIT_SERIAL_TX_BUFF_INIT = 8,
ASYNC = 0,
SYNC_SPINWAIT = 1,
SYNC_SLEEP = 2,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitStorage.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_STORAGE_MAGIC = 0xCAFE,
MICROBIT_STORAGE_BLOCK_SIZE = 48,
MICROBIT_STORAGE_KEY_SIZE = 16,
MICROBIT_STORAGE_STORE_PAGE_OFFSET = 17,
MICROBIT_STORAGE_SCRATCH_PAGE_OFFSET = 19,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitThermometer.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
MICROBIT_THERMOMETER_PERIOD = 1000,
MICROBIT_THERMOMETER_EVT_UPDATE = 1,
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_THERMOMETER_ADDED_TO_IDLE = 2,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/drivers/TimedInterruptIn.h
// built/yt/yotta_modules/microbit-dal/inc/platform/yotta_cfg_mappings.h
// built/yt/yotta_modules/microbit-dal/inc/types/ManagedString.h
// built/yt/yotta_modules/microbit-dal/inc/types/ManagedType.h
// built/yt/yotta_modules/microbit-dal/inc/types/Matrix4.h
// built/yt/yotta_modules/microbit-dal/inc/types/MicroBitCoordinateSystem.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
RAW = 0,
SIMPLE_CARTESIAN = 1,
NORTH_EAST_DOWN = 2,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/types/MicroBitEvent.h
Re-generate for new DAL
2016-04-15 02:58:10 +02:00
MICROBIT_ID_ANY = 0,
MICROBIT_EVT_ANY = 0,
CREATE_ONLY = 0,
CREATE_AND_FIRE = 1,
update motor support and add demo
2016-11-10 13:48:20 +01:00
// built/yt/yotta_modules/microbit-dal/inc/types/MicroBitImage.h
// built/yt/yotta_modules/microbit-dal/inc/types/PacketBuffer.h
// built/yt/yotta_modules/microbit-dal/inc/types/RefCounted.h
Export constants from DAL in dal.d.ts
2016-04-01 23:14:57 +02:00
}
Reference in New Issue Copy Permalink