fixing links in docs

docs/projects/hack-your-headphones.md

@@ -21,7 +21,7 @@ Build your own music player micro:bit from headphones.
 
 ## Activities
 
-* [Connect your headphone](/projects/hack-your-headphone/making)
+* [Connect your headphone](/projects/hack-your-headphones/making)
 * [Play sounds!]()
 
 # ~hint

docs/projects/timing-gates.md

@@ -87,7 +87,7 @@ The gate is ready to use! Your circuit should look like the picture below:
 
 ## Detecting the car with code
 
-The micro:bit provides an event [on pin pressed](/reference/pins/on-pin-pressed) 
+The micro:bit provides an event [on pin pressed](/reference/input/on-pin-pressed) 
 that is raised when a circuit between ``GND`` and a pin is detected. The circuit conductor could be a wire or even your body!
 We will attach a foil to the bottom of the car. When it passes over the gate, it connect both foil strips, close the circuit and trigger the event. 
 
@@ -146,7 +146,7 @@ Connect the crocodile plugs to the ``GND`` and ``P1`` pins on the micro:bit.
 
 ## Detecting the second gate
 
-Since the second gate is connected to pin ``P1``, we add a second [on pin pressed](/reference/pins/on-pin-pressed) event
+Since the second gate is connected to pin ``P1``, we add a second [on pin pressed](/reference/input/on-pin-pressed) event
 that display 2 columns of LEDs.
 
 ```blocks

docs/reference/basic.md

@@ -35,4 +35,6 @@ basic.showAnimation(`
 
 ### See Also
 
-[showNumber](/reference/basic/show-number), [showLeds](/reference/basic/show-leds), [showString](/reference/basic/show-string), [clearScreen](/reference/basic/clear-screen), [forever](/reference/basic/forever), [pause](/reference/basic/pause), [plotLeds](/reference/basic/plot-leds), [showAnimation](/reference/basic/show-animation)
+[showNumber](/reference/basic/show-number), [showLeds](/reference/basic/show-leds), [showString](/reference/basic/show-string), 
+[clearScreen](/reference/basic/clear-screen), [forever](/reference/basic/forever), [pause](/reference/basic/pause), 
+[showAnimation](/reference/basic/show-animation)

docs/reference/bluetooth/uart-read-until.md

@@ -7,7 +7,7 @@ For another device like a smartphone to use any of the Bluetooth "services" whic
 
 ### ~
 
-The [Bluetooth UART service](start-uart-service.md) allows another device such as a smartphone to exchange any data it wants to with the micro:bit, in small chunks. 
+The [Bluetooth UART service](/reference/bluetooth/start-uart-service) allows another device such as a smartphone to exchange any data it wants to with the micro:bit, in small chunks. 
 
 With the Bluetooth UART service running, this block allows a micro:bit to read data which has been received from a Bluetooth connected device, terminating reading and returning the value obtained as soon as a specified delimiter character is encountered. This means that connected devices can send data to the micro:bit and indicate that the complete message has been sent by appending the message with the delimiter character.
 

docs/reference/bluetooth/uart-write-number.md

@@ -7,7 +7,7 @@ For another device like a smartphone to use any of the Bluetooth "services" whic
 
 ### ~
 
-The [Bluetooth UART service](/reference/bluetooth/start-uart-service.md) allows another device such as a smartphone to exchange any data it wants to with the micro:bit, in small chunks. 
+The [Bluetooth UART service](/reference/bluetooth/start-uart-service) allows another device such as a smartphone to exchange any data it wants to with the micro:bit, in small chunks. 
 
 With the Bluetooth UART service running, this block allows a micro:bit to send data to a Bluetooth connected device.
 

docs/reference/bluetooth/uart-write-string.md

@@ -7,7 +7,7 @@ For another device like a smartphone to use any of the Bluetooth "services" whic
 
 ### ~
 
-The [Bluetooth UART service](/reference/bluetooth/start-uart-service.md) allows another device such as a smartphone to exchange any data it wants to with the micro:bit, in small chunks. 
+The [Bluetooth UART service](/reference/bluetooth/start-uart-service) allows another device such as a smartphone to exchange any data it wants to with the micro:bit, in small chunks. 
 
 With the Bluetooth UART service running, this block allows a micro:bit to send data to a Bluetooth connected device.
 

docs/reference/bluetooth/uart-write-value.md

@@ -7,7 +7,7 @@ For another device like a smartphone to use any of the Bluetooth "services" whic
 
 ### ~
 
-The [Bluetooth UART service](/reference/bluetooth/start-uart-service.md) allows another device such as a smartphone to exchange any data it wants to with the micro:bit, in small chunks. 
+The [Bluetooth UART service](/reference/bluetooth/start-uart-service) allows another device such as a smartphone to exchange any data it wants to with the micro:bit, in small chunks. 
 
 With the Bluetooth UART service running, this block allows a micro:bit to send data to a Bluetooth connected device.
 

docs/reference/input.md

@@ -42,4 +42,4 @@ input.onShake(() => {
 
 ### See Also
 
-[onButtonPressed](/reference/input/on-button-pressed), [onGesture](/reference/input/on-gesture), [onPinPressed](/reference/input/on-pin-pressed), [buttonIsPressed](/reference/input/button-is-pressed), [compassHeading](/reference/input/compass-heading), [pinIsPressed](/reference/input/pin-is-pressed), [temperature](/reference/input/temperature), [acceleration](/reference/input/acceleration), [lightLevel](/reference/input/light-level), [rotation](/reference/input/rotation), [magneticForce](/reference/input/magnetic-force), [runningTime](/reference/input/running-time), [setAccelerometerRange](/reference/input/set-accelerometer-range), [calibrate](/reference/input/calibrate), [onLogoDown](/reference/input/on-logo-down), [onLogoUp](/reference/input/on-logo-up), [onScreenDown](/reference/input/on-screen-down), [onScreenUp](/reference/input/on-screen-up), [onShake](/reference/input/on-shake)
+[onButtonPressed](/reference/input/on-button-pressed), [onGesture](/reference/input/on-gesture), [onPinPressed](/reference/input/on-pin-pressed), [buttonIsPressed](/reference/input/button-is-pressed), [compassHeading](/reference/input/compass-heading), [pinIsPressed](/reference/input/pin-is-pressed), [temperature](/reference/input/temperature), [acceleration](/reference/input/acceleration), [lightLevel](/reference/input/light-level), [rotation](/reference/input/rotation), [magneticForce](/reference/input/magnetic-force), [runningTime](/reference/input/running-time), [setAccelerometerRange](/reference/input/set-accelerometer-range)

docs/reference/pins.md

@@ -26,4 +26,4 @@ pins.analogSetPitchPin(AnalogPin.P0);
 
 ### See Also
 
-[digitalReadPin](/reference/pins/digital-read-pin), [digitalWritePin](/reference/pins/digital-write-pin), [analogReadPin](/reference/pins/analog-read-pin), [analogWritePin](/reference/pins/analog-write-pin), [analogSetPeriod](/reference/pins/analog-set-period), [map](/reference/pins/map), [onPulsed](/reference/pins/on-pulsed), [pulseDuration](/reference/pins/pulse-duration), [pulseIn](/reference/pins/pulse-in), [servoWritePin](/reference/pins/servo-write-pin), [servoSetPulse](/reference/pins/servo-set-pulse), [i2cReadNumber](/reference/pins/i2c-read-number), [i2cWriteNumber](/reference/pins/i2c-write-number), [setPull](/reference/pins/set-pull), [analogPitch](/reference/pins/analog-pitch), [analogSetPitchPin](/reference/pins/analog-set-pitch), [spiWrite](/reference/pins/spi-write)
+[digitalReadPin](/reference/pins/digital-read-pin), [digitalWritePin](/reference/pins/digital-write-pin), [analogReadPin](/reference/pins/analog-read-pin), [analogWritePin](/reference/pins/analog-write-pin), [analogSetPeriod](/reference/pins/analog-set-period), [map](/reference/pins/map), [onPulsed](/reference/pins/on-pulsed), [pulseDuration](/reference/pins/pulse-duration), [pulseIn](/reference/pins/pulse-in), [servoWritePin](/reference/pins/servo-write-pin), [servoSetPulse](/reference/pins/servo-set-pulse), [i2cReadNumber](/reference/pins/i2c-read-number), [i2cWriteNumber](/reference/pins/i2c-write-number), [setPull](/reference/pins/set-pull), [analogPitch](/reference/pins/analog-pitch), [analogSetPitchPin](/reference/pins/analog-set-pitch-pin), [spiWrite](/reference/pins/spi-write)

docs/reference/radio.md

@@ -25,4 +25,4 @@ radio
 
 ### See Also
 
-[sendNumber](/reference/radio/send-number), [sendValue](/reference/radio/send-value), [sendString](/reference/radio/send-string), [onDataReceived](/reference/radio/on-data-received), [receiveNumber](/reference/radio/receive-number), [receivedNumberAt](/reference/radio/received-number-at), [receiveString](/reference/radio/receive-string), [receivedSignalStrength](/reference/radio/received-signal-strength), [setGroup](/reference/radio/set-group), [setTransmitPower](/reference/radio/set-transmit-power), [setTransmitSerialNumber](/reference/radio/set-transmit-serial-number), [writeValueToSerial](/reference/radio/write-value-to-serial)
+[sendNumber](/reference/radio/send-number), [sendValue](/reference/radio/send-value), [sendString](/reference/radio/send-string), [onDataReceived](/reference/radio/on-data-received), [receiveNumber](/reference/radio/receive-number), [receiveString](/reference/radio/receive-string), [receivedSignalStrength](/reference/radio/received-signal-strength), [setGroup](/reference/radio/set-group), [setTransmitPower](/reference/radio/set-transmit-power), [setTransmitSerialNumber](/reference/radio/set-transmit-serial-number), [writeValueToSerial](/reference/radio/write-value-to-serial)

docs/reference/types/boolean.md

@@ -13,4 +13,4 @@ false;
 
 ### See Also
 
-[boolean (blocks)](/blocks/logic/boolean.md)
+[boolean (blocks)](/blocks/logic/boolean)

docs/uploader.md

@@ -38,7 +38,7 @@ That's it!
 
 ### Installation Instructions
 
-* Download the [Microsoft.Uploader.Microbit.zip](/microbit-uploader.zip) file to your local computer.
+* Download the [Microsoft.Uploader.Microbit.zip](https://pxt.microbit.org/microbit-uploader.zip) file to your local computer.
 * Unzip the .zip file to your desktop.
 * Launch the Microsoft.Uploader.exe file before working on your BBC micro:bit.