adding URL for SEO
This commit is contained in:
Peli de Halleux
parent
78089da134
commit
b3edb81d3c
|
|
@ -32,4 +32,8 @@ bluetooth.onBluetoothConnected(() => {});
|
|||
```package
|
||||
microbit-devices
|
||||
microbit-bluetooth
|
||||
```
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[basic](/reference/basic), [input](/reference/input), [music](/reference/music), [led](/reference/led), [Math](/reference/Math), [String](/reference/String), [game](/reference/game), [images](/reference/images), [pins](/reference/pins), [serial](/reference/serial), [control](/reference/control), [radio](/reference/radio), [devices](/reference/devices), [bluetooth](/reference/bluetooth)
|
||||
|
|
|
|||
|
|
@ -3,3 +3,7 @@
|
|||
```cards
|
||||
String.fromCharCode(0);
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[fromCharCode](/reference//math/string-from-char-code)
|
||||
|
|
|
|||
|
|
@ -32,3 +32,7 @@ basic.showAnimation(`
|
|||
. . . . .
|
||||
`);
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[showNumber](/reference/basic/show-number), [showLeds](/reference/basic/show-leds), [showString](/reference/basic/show-string), [clearScreen](/reference/basic/clear-screen), [forever](/reference/basic/forever), [pause](/reference/basic/pause), [plotLeds](/reference/basic/plot-leds), [showAnimation](/reference/basic/show-animation)
|
||||
|
|
|
|||
|
|
@ -22,3 +22,7 @@ bluetooth.onBluetoothDisconnected(() => {
|
|||
```package
|
||||
microbit-bluetooth
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[startAccelerometerService](/reference/bluetooth/start-accelerometer-service), [startButtonService](/reference/bluetooth/start-button-service), [startIOPinService](/reference/bluetooth/start-io-pin-service), [startLEDService](/reference/bluetooth/start-led-service), [startMagnetometerService](/reference/bluetooth/start-magnetometer-service), [startTemperatureService](/reference/bluetooth/start-temperature-service), [uartRead](/reference/bluetooth/uart-read), [uartWrite](/reference/bluetooth/uart-write), [onBluetoothConnected](/reference/bluetooth/on-bluetooth-connected), [onBluetoothDisconnected](/reference/bluetooth/on-bluetooth-disconnected)
|
||||
|
|
|
|||
|
|
@ -8,3 +8,7 @@ control.inBackground(() => {
|
|||
});
|
||||
control.reset();
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[inBackground](/reference/control/in-background), [reset](/reference/control/reset)
|
||||
|
|
|
|||
|
|
@ -17,3 +17,11 @@ devices.onSignalStrengthChanged(() => {
|
|||
|
||||
});
|
||||
```
|
||||
|
||||
```package
|
||||
microbit-devices
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[tellCameraTo](/reference/devices/tell-camera-to), [tellRemoteControlTo](/reference/devices/tell-remote-control-to), [raiseAlertTo](/reference/devices/raise-alert-to), [onNotified](/reference/devices/on-notified), [onGamepadButton](/reference/devices/on-gamepad-button), [signalStrength](/reference/devices/signal-strength), [onSignalStrengthChanged](/reference/devices/on-signal-strength-changed)
|
||||
|
|
|
|||
|
|
@ -9,3 +9,7 @@ game.startCountdown(10000);
|
|||
game.gameOver();
|
||||
game.setScore(0);
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[addScore](/reference/game/add-score), [score](/reference/game/score), [startCountdown](/reference/game/start-countdown), [gameOver](/reference/game/game-over), [setScore](/reference/game/set-score)
|
||||
|
|
|
|||
|
|
@ -18,3 +18,7 @@ images.createBigImage(`
|
|||
. . . . .
|
||||
`);
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[createImage](/reference/images/create-image), [createBigImage](/reference/images/create-big-image)
|
||||
|
|
|
|||
|
|
@ -39,3 +39,7 @@ input.onShake(() => {
|
|||
|
||||
});
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[onButtonPressed](/reference/input/on-button-pressed), [onGesture](/reference/input/on-gesture), [onPinPressed](/reference/input/on-pin-pressed), [buttonIsPressed](/reference/input/button-is-pressed), [compassHeading](/reference/input/compass-heading), [pinIsPressed](/reference/input/pin-is-pressed), [temperature](/reference/input/temperature), [acceleration](/reference/input/acceleration), [lightLevel](/reference/input/light-level), [rotation](/reference//input/rotation), [magneticForce](/reference/input/magnetic-force), [runningTime](/reference/input/running-time), [setAccelerometerRange](/reference/input/set-accelerometer-range), [calibrate](/reference/input/calibrate), [onLogoDown](/reference/input/on-logo-down), [onLogoUp](/reference/input/on-logo-up), [onScreenDown](/reference/input/on-screen-down), [onScreenUp](/reference/input/on-screen-up), [onShake](/reference/input/on-shake)
|
||||
|
|
|
|||
|
|
@ -18,3 +18,7 @@ led.toggle(0, 0);
|
|||
led.toggleAll();
|
||||
led.setDisplayMode(DisplayMode.BackAndWhite);
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[plot](/reference/led/plot), [unplot](/reference/led/unplot), [point](/reference/led/point), [brightness](/reference/led/brightness), [setBrightness](/reference/led/set-brightness), [stopAnimation](/reference/led/stop-animation), [plotBarGraph](/reference//led/plot-bar-graph), [fadeIn](/reference/led/fade-in), [fadeOut](/reference/led/fade-out), [plotAll](/reference/led/plot-all), [screenshot](/reference/led/screenshot), [toggle](/reference/led/toggle), [toggleAll](/reference/led/toggle-all), [setDisplayMode](/reference//led/set-display-mode)
|
||||
|
|
|
|||
|
|
@ -12,3 +12,7 @@ music.tempo();
|
|||
music.changeTempoBy(20);
|
||||
music.setTempo(120);
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[playTone](/reference/music/play-tone), [ringTone](/reference/music/ring-tone), [rest](/reference/music/rest), [noteFrequency](/reference/music/note-frequency), [beat](/reference/music/beat), [tempo](/reference/music/tempo), [changeTempoBy](/reference/music/change-tempo), [setTempo](/reference/music/set-tempo)
|
||||
|
|
|
|||
|
|
@ -21,3 +21,7 @@ pins.setPull(DigitalPin.P0, PinPullMode.PullDown);
|
|||
pins.analogPitch(0, 0);
|
||||
pins.analogSetPitchPin(AnalogPin.P0);
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[digitalReadPin](/reference/pins/digital-read-pin), [digitalWritePin](/reference/pins/digital-write-pin), [analogReadPin](/reference/pins/analog-read-pin), [analogWritePin](/reference/pins/analog-write-pin), [analogSetPeriod](/reference/pins/analog-set-period), [map](/reference/pins/map), [onPulsed](/reference/pins/on-pulsed), [pulseDuration](/reference/pins/pulse-duration), [servoWritePin](/reference/pins/servo-write-pin), [servoSetPulse](/reference/pins/serial-set-pulse), [i2cReadNumber](/reference/pins/i2c-read-number), [i2cWriteNumber](/reference/pins/i2c-write-number), [setPull](/reference/pins/set-pull), [analogPitch](/reference/pins/analog-pitch), [analogSetPitchPin](/reference/pins/analog-set-pitch)
|
||||
|
|
|
|||
|
|
@ -15,6 +15,14 @@ radio.receiveString();
|
|||
radio.receivedSignalStrength();
|
||||
radio.setGroup(0);
|
||||
radio.setTransmitPower(7);
|
||||
radio.writeValueToSerial();
|
||||
radio.setTransmitSerialNumber(false);
|
||||
radio.writeValueToSerial();
|
||||
```
|
||||
|
||||
```package
|
||||
microbit-radio
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[sendNumber](/reference/radio/send-number), [sendValue](/reference/radio/send-value), [sendString](/reference/radio/send-string), [onDataReceived](/reference/radio/on-data-received), [receiveNumber](/reference/radio/receive-number), [receivedNumberAt](/reference/radio/received-number-at), [receiveString](/reference/radio/receive-string), [receivedSignalStrength](/reference/radio/received-signal-strength), [setGroup](/reference/radio/set-group), [setTransmitPower](/reference/radio/set-transmit-power), [setTransmitSerialNumber](/reference/radio/set-transmit-serial-number), [writeValueToSerial](/reference/radio/write-value-to-serial)
|
||||
|
|
|
|||
|
|
@ -10,3 +10,7 @@ serial.writeString("");
|
|||
serial.readLine();
|
||||
serial.redirect(SerialPin.P0, SerialPin.P0, BaudRate.BaudRate115200);
|
||||
```
|
||||
|
||||
### See Also
|
||||
|
||||
[writeLine](/reference/serial/write-line), [writeNumber](/reference/serial/write-number), [writeValue](/reference/serial/write-value), [writeString](/reference/serial/write-string), [readLine](/reference/serial/read-line), [redirect](/reference/serial/redirect-to)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,15 @@
|
|||
{
|
||||
"bluetooth": "Support for additional Bluetooth services.",
|
||||
"bluetooth.onBluetoothConnected": "Register code to run when the micro:bit is connected to over Bluetooth",
|
||||
"bluetooth.onBluetoothConnected|param|body": "Code to run when a Bluetooth connection is established",
|
||||
"bluetooth.onBluetoothDisconnected": "Register code to run when a bluetooth connection to the micro:bit is lost",
|
||||
"bluetooth.onBluetoothDisconnected|param|body": "Code to run when a Bluetooth connection is lost",
|
||||
"bluetooth.startAccelerometerService": "Starts the Bluetooth accelerometer service",
|
||||
"bluetooth.startButtonService": "Starts the Bluetooth button service",
|
||||
"bluetooth.startIOPinService": "Starts the Bluetooth IO pin service.",
|
||||
"bluetooth.startLEDService": "Starts the Bluetooth LED service",
|
||||
"bluetooth.startMagnetometerService": "Starts the Bluetooth magnetometer service",
|
||||
"bluetooth.startTemperatureService": "Starts the Bluetooth temperature service",
|
||||
"bluetooth.uartRead": "Reads from the Bluetooth UART service buffer, returning its contents when the specified delimiter character is encountered.",
|
||||
"bluetooth.uartWrite": "Writes to the Bluetooth UART service buffer. From there the data is transmitted over Bluetooth to a connected device."
|
||||
}
|
||||
|
|
@ -1,26 +1,13 @@
|
|||
{
|
||||
"bluetooth": "Support for additional Bluetooth services.",
|
||||
"bluetooth.onBluetoothConnected": "Register code to run when the micro:bit is connected to over Bluetooth",
|
||||
"bluetooth.onBluetoothConnected|block": "on bluetooth connected",
|
||||
"bluetooth.onBluetoothConnected|param|body": "Code to run when a Bluetooth connection is established",
|
||||
"bluetooth.onBluetoothDisconnected": "Register code to run when a bluetooth connection to the micro:bit is lost",
|
||||
"bluetooth.onBluetoothDisconnected|block": "on bluetooth disconnected",
|
||||
"bluetooth.onBluetoothDisconnected|param|body": "Code to run when a Bluetooth connection is lost",
|
||||
"bluetooth.startAccelerometerService": "Starts the Bluetooth accelerometer service",
|
||||
"bluetooth.startAccelerometerService|block": "bluetooth accelerometer service",
|
||||
"bluetooth.startButtonService": "Starts the Bluetooth button service",
|
||||
"bluetooth.startButtonService|block": "bluetooth button service",
|
||||
"bluetooth.startIOPinService": "Starts the Bluetooth IO pin service.",
|
||||
"bluetooth.startIOPinService|block": "bluetooth io pin service",
|
||||
"bluetooth.startLEDService": "Starts the Bluetooth LED service",
|
||||
"bluetooth.startLEDService|block": "bluetooth led service",
|
||||
"bluetooth.startMagnetometerService": "Starts the Bluetooth magnetometer service",
|
||||
"bluetooth.startMagnetometerService|block": "bluetooth magnetometer service",
|
||||
"bluetooth.startTemperatureService": "Starts the Bluetooth temperature service",
|
||||
"bluetooth.startTemperatureService|block": "bluetooth temperature service",
|
||||
"bluetooth.uartRead": "Reads from the Bluetooth UART service buffer, returning its contents when the specified delimiter character is encountered.",
|
||||
"bluetooth.uartRead|block": "bluetooth uart read %del=bluetooth_uart_delimiter_conv",
|
||||
"bluetooth.uartWrite": "Writes to the Bluetooth UART service buffer. From there the data is transmitted over Bluetooth to a connected device.",
|
||||
"bluetooth.uartWrite|block": "bluetooth uart write %data",
|
||||
"bluetooth|block": "bluetooth"
|
||||
}
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
{
|
||||
"devices": "Control a phone with the BBC micro:bit via Bluetooth.",
|
||||
"devices.onGamepadButton": "Register code to run when the micro:bit receives a command from the paired gamepad.",
|
||||
"devices.onGamepadButton|param|body": "code to run when button is pressed",
|
||||
"devices.onGamepadButton|param|name": "button name",
|
||||
"devices.onNotified": "Registers code to run when the device notifies about a particular event.",
|
||||
"devices.onNotified|param|body": "code handler when event is triggered",
|
||||
"devices.onNotified|param|event": "event description",
|
||||
"devices.onSignalStrengthChanged": "Registers code to run when the device notifies about a change of signal strength.",
|
||||
"devices.onSignalStrengthChanged|param|body": "Code run when the signal strength changes.",
|
||||
"devices.raiseAlertTo": "Sends an ``alert`` command to the parent device.",
|
||||
"devices.raiseAlertTo|param|event": "event description",
|
||||
"devices.signalStrength": "Returns the last signal strength reported by the paired device.",
|
||||
"devices.tellCameraTo": "Sends a ``camera`` command to the parent device.",
|
||||
"devices.tellCameraTo|param|event": "event description",
|
||||
"devices.tellRemoteControlTo": "Sends a ``remote control`` command to the parent device.",
|
||||
"devices.tellRemoteControlTo|param|event": "event description"
|
||||
}
|
||||
|
|
@ -1,26 +1,10 @@
|
|||
{
|
||||
"devices": "Control a phone with the BBC micro:bit via Bluetooth.",
|
||||
"devices.onGamepadButton": "Register code to run when the micro:bit receives a command from the paired gamepad.",
|
||||
"devices.onGamepadButton|block": "on gamepad button|%NAME",
|
||||
"devices.onGamepadButton|param|body": "code to run when button is pressed",
|
||||
"devices.onGamepadButton|param|name": "button name",
|
||||
"devices.onNotified": "Registers code to run when the device notifies about a particular event.",
|
||||
"devices.onNotified|block": "on notified|%event",
|
||||
"devices.onNotified|param|body": "code handler when event is triggered",
|
||||
"devices.onNotified|param|event": "event description",
|
||||
"devices.onSignalStrengthChanged": "Registers code to run when the device notifies about a change of signal strength.",
|
||||
"devices.onSignalStrengthChanged|block": "on signal strength changed",
|
||||
"devices.onSignalStrengthChanged|param|body": "Code run when the signal strength changes.",
|
||||
"devices.raiseAlertTo": "Sends an ``alert`` command to the parent device.",
|
||||
"devices.raiseAlertTo|block": "raise alert to|%property",
|
||||
"devices.raiseAlertTo|param|event": "event description",
|
||||
"devices.signalStrength": "Returns the last signal strength reported by the paired device.",
|
||||
"devices.signalStrength|block": "signal strength",
|
||||
"devices.tellCameraTo": "Sends a ``camera`` command to the parent device.",
|
||||
"devices.tellCameraTo|block": "tell camera to|%property",
|
||||
"devices.tellCameraTo|param|event": "event description",
|
||||
"devices.tellRemoteControlTo": "Sends a ``remote control`` command to the parent device.",
|
||||
"devices.tellRemoteControlTo|block": "tell remote control to|%property",
|
||||
"devices.tellRemoteControlTo|param|event": "event description",
|
||||
"devices|block": "devices"
|
||||
}
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
{
|
||||
"radio": "Communicate data using radio packets",
|
||||
"radio.onDataReceived": "Registers code to run when a packet is received over radio.",
|
||||
"radio.receiveNumber": "Reads the next packet as a number from the radio queue.",
|
||||
"radio.receiveString": "Reads the next packet as a string and returns it.",
|
||||
"radio.receivedNumberAt": "Reads a number at a given index, between ``0`` and ``3``, from the packet received by ``receive number``. Not supported in simulator.",
|
||||
"radio.receivedNumberAt|param|index": "index of the number to read from 0 to 3. 1 eg",
|
||||
"radio.receivedSignalStrength": "Gets the received signal strength indicator (RSSI) from the packet received by ``receive number``. Not supported in simulator.\nnamespace=radio",
|
||||
"radio.sendNumber": "Broadcasts a number over radio to any connected micro:bit in the group.",
|
||||
"radio.sendString": "Broadcasts a number over radio to any connected micro:bit in the group.",
|
||||
"radio.sendValue": "Broadcasts a name / value pair along with the device serial number\nand running time to any connected micro:bit in the group.",
|
||||
"radio.sendValue|param|name": "the field name (max 12 characters), eg: \"data\"",
|
||||
"radio.sendValue|param|value": "the numberic value",
|
||||
"radio.setGroup": "Sets the group id for radio communications. A micro:bit can only listen to one group ID at any time.\n@ param id the group id between ``0`` and ``255``, 1 eg",
|
||||
"radio.setTransmitPower": "Change the output power level of the transmitter to the given value.",
|
||||
"radio.setTransmitPower|param|power": "a value in the range 0..7, where 0 is the lowest power and 7 is the highest. eg: 7",
|
||||
"radio.setTransmitSerialNumber": "Set the radio to transmit the serial number in each message.",
|
||||
"radio.writeValueToSerial": "Reads a value sent with `stream value` and writes it\nto the serial stream as JSON"
|
||||
}
|
||||
|
|
@ -1,32 +1,15 @@
|
|||
{
|
||||
"radio": "Communicate data using radio packets",
|
||||
"radio.onDataReceived": "Registers code to run when a packet is received over radio.",
|
||||
"radio.onDataReceived|block": "on data received",
|
||||
"radio.receiveNumber": "Reads the next packet as a number from the radio queue.",
|
||||
"radio.receiveNumber|block": "receive number",
|
||||
"radio.receiveString": "Reads the next packet as a string and returns it.",
|
||||
"radio.receiveString|block": "receive string",
|
||||
"radio.receivedNumberAt": "Reads a number at a given index, between ``0`` and ``3``, from the packet received by ``receive number``. Not supported in simulator.",
|
||||
"radio.receivedNumberAt|block": "receive number|at %VALUE",
|
||||
"radio.receivedNumberAt|param|index": "index of the number to read from 0 to 3. 1 eg",
|
||||
"radio.receivedSignalStrength": "Gets the received signal strength indicator (RSSI) from the packet received by ``receive number``. Not supported in simulator.\nnamespace=radio",
|
||||
"radio.receivedSignalStrength|block": "received signal strength",
|
||||
"radio.sendNumber": "Broadcasts a number over radio to any connected micro:bit in the group.",
|
||||
"radio.sendNumber|block": "send number %value",
|
||||
"radio.sendString": "Broadcasts a number over radio to any connected micro:bit in the group.",
|
||||
"radio.sendString|block": "send string %msg",
|
||||
"radio.sendValue": "Broadcasts a name / value pair along with the device serial number\nand running time to any connected BBC micro:bit in the group.",
|
||||
"radio.sendValue|block": "send|value %name|= %value",
|
||||
"radio.sendValue|param|name": "the field name (max 12 characters), eg: \"data\"",
|
||||
"radio.sendValue|param|value": "the numberic value",
|
||||
"radio.setGroup": "Sets the group id for radio communications. A micro:bit can only listen to one group ID at any time.\n@ param id the group id between ``0`` and ``255``, 1 eg",
|
||||
"radio.setGroup|block": "set group %ID",
|
||||
"radio.setTransmitPower": "Change the output power level of the transmitter to the given value.",
|
||||
"radio.setTransmitPower|block": "set transmit power %power",
|
||||
"radio.setTransmitPower|param|power": "a value in the range 0..7, where 0 is the lowest power and 7 is the highest. eg: 7",
|
||||
"radio.setTransmitSerialNumber": "Set the radio to transmit the serial number in each message.",
|
||||
"radio.setTransmitSerialNumber|block": "set tranmist serial number %transmit",
|
||||
"radio.writeValueToSerial": "Reads a value sent with `stream value` and writes it\nto the serial stream as JSON",
|
||||
"radio.writeValueToSerial|block": "write value to serial",
|
||||
"radio.onDataReceived|block": "radio on data received",
|
||||
"radio.receiveNumber|block": "radio receive number",
|
||||
"radio.receiveString|block": "radio receive string",
|
||||
"radio.receivedNumberAt|block": "radio receive number|at %VALUE",
|
||||
"radio.receivedSignalStrength|block": "radio received signal strength",
|
||||
"radio.sendNumber|block": "radio send number %value",
|
||||
"radio.sendString|block": "radio send string %msg",
|
||||
"radio.sendValue|block": "radio send|value %name|= %value",
|
||||
"radio.setGroup|block": "radio set group %ID",
|
||||
"radio.setTransmitPower|block": "radio set transmit power %power",
|
||||
"radio.setTransmitSerialNumber|block": "radio set transmit serial number %transmit",
|
||||
"radio.writeValueToSerial|block": "radio write value to serial",
|
||||
"radio|block": "radio"
|
||||
}
|
||||
|
|
@ -0,0 +1,166 @@
|
|||
{
|
||||
"Math.randomBoolean": "Generates a `true` or `false` value randomly, just like flipping a coin.",
|
||||
"String.fromCharCode": "Make a string from the given ASCII character code.",
|
||||
"basic": "Provides access to basic micro:bit functionality.",
|
||||
"basic.clearScreen": "Turn off all LEDs",
|
||||
"basic.forever": "Repeats the code forever in the background. On each iteration, allows other codes to run.",
|
||||
"basic.pause": "Pause for the specified time in milliseconds",
|
||||
"basic.pause|param|ms": "how long to pause for, eg: 100, 200, 500, 1000, 2000",
|
||||
"basic.plotLeds": "Draws an image on the LED screen.",
|
||||
"basic.plotLeds|param|leds": "pattern of LEDs to turn on/off",
|
||||
"basic.showAnimation": "Shows a sequence of LED screens as an animation.",
|
||||
"basic.showAnimation|param|interval": "time in milliseconds between each redraw",
|
||||
"basic.showAnimation|param|leds": "pattern of LEDs to turn on/off",
|
||||
"basic.showLeds": "Draws an image on the LED screen.",
|
||||
"basic.showLeds|param|interval": "time in milliseconds to pause after drawing",
|
||||
"basic.showLeds|param|leds": "the pattern of LED to turn on/off",
|
||||
"basic.showNumber": "Scroll a number on the screen. If the number fits on the screen (i.e. is a single digit), do not scroll.",
|
||||
"basic.showNumber|param|interval": "speed of scroll; eg: 150, 100, 200, -100",
|
||||
"basic.showString": "Display text on the display, one character at a time. If the string fits on the screen (i.e. is one letter), does not scroll.",
|
||||
"basic.showString|param|interval": "how fast to shift characters; eg: 150, 100, 200, -100",
|
||||
"basic.showString|param|text": "the text to scroll on the screen, eg: \"Hello!\"",
|
||||
"control": "Runtime and event utilities.",
|
||||
"control.inBackground": "Schedules code that run in the background.",
|
||||
"control.reset": "Resets the BBC micro:bit.",
|
||||
"game": "A single-LED sprite game engine",
|
||||
"game.addScore": "Adds points to the current score",
|
||||
"game.addScore|param|points": "amount of points to change, eg: 1",
|
||||
"game.gameOver": "Displays a game over animation.",
|
||||
"game.score": "Gets the current score",
|
||||
"game.setScore": "Sets the current score value",
|
||||
"game.setScore|param|value": "TODO",
|
||||
"game.startCountdown": "Starts a game countdown timer",
|
||||
"game.startCountdown|param|ms": "countdown duration in milliseconds, eg: 10000",
|
||||
"images": "Creation, manipulation and display of LED images.",
|
||||
"images.createBigImage": "Creates an image with 2 frames.",
|
||||
"images.createImage": "Creates an image that fits on the LED screen.",
|
||||
"input": "Events and data from sensors",
|
||||
"input.acceleration": "Get the acceleration value in milli-gravitys (when the board is laying flat with the screen up, x=0, y=0 and z=-1024)",
|
||||
"input.acceleration|param|dimension": "TODO",
|
||||
"input.buttonIsPressed": "Get the button state (pressed or not) for ``A`` and ``B``.",
|
||||
"input.calibrate": "Obsolete, compass calibration is automatic.",
|
||||
"input.compassHeading": "Get the current compass compass heading in degrees.",
|
||||
"input.lightLevel": "Reads the light level applied to the LED screen in a range from ``0`` (dark) to ``255`` bright.",
|
||||
"input.magneticForce": "Get the magnetic force value in ``micro-Teslas`` (``µT``). This function is not supported in the simulator.",
|
||||
"input.magneticForce|param|dimension": "TODO",
|
||||
"input.onButtonPressed": "Do something when a button (``A``, ``B`` or both ``A+B``) is pressed",
|
||||
"input.onButtonPressed|param|body": "TODO",
|
||||
"input.onButtonPressed|param|button": "TODO",
|
||||
"input.onGesture": "Attaches code to run when the screen is facing up.",
|
||||
"input.onGesture|param|body": "TODO",
|
||||
"input.onLogoDown": "Attaches code to run when the logo is oriented downwards and the board is vertical.",
|
||||
"input.onLogoDown|param|body": "TODO",
|
||||
"input.onLogoUp": "Attaches code to run when the logo is oriented upwards and the board is vertical.",
|
||||
"input.onLogoUp|param|body": "TODO",
|
||||
"input.onPinPressed": "Do something when a pin(``P0``, ``P1`` or both ``P2``) is pressed.",
|
||||
"input.onPinPressed|param|body": "TODO",
|
||||
"input.onPinPressed|param|name": "TODO",
|
||||
"input.onScreenDown": "Attaches code to run when the screen is facing down.",
|
||||
"input.onScreenDown|param|body": "TODO",
|
||||
"input.onScreenUp": "Attaches code to run when the screen is facing up.",
|
||||
"input.onScreenUp|param|body": "TODO",
|
||||
"input.onShake": "Attaches code to run when the device is shaken.",
|
||||
"input.onShake|param|body": "TODO",
|
||||
"input.pinIsPressed": "Get the pin state (pressed or not). Requires to hold the ground to close the circuit.",
|
||||
"input.pinIsPressed|param|name": "pin used to detect the touch",
|
||||
"input.rotation": "The pitch of the device, rotation along the ``x-axis``, in degrees.",
|
||||
"input.rotation|param|kind": "TODO",
|
||||
"input.runningTime": "Gets the number of milliseconds elapsed since power on.",
|
||||
"input.setAccelerometerRange": "Sets the accelerometer sample range in gravities.",
|
||||
"input.setAccelerometerRange|param|range": "a value describe the maximum strengh of acceleration measured",
|
||||
"input.temperature": "Gets the temperature in Celsius degrees (°C).",
|
||||
"led": "Control of the LED screen.",
|
||||
"led.brightness": "Get the screen brightness from 0 (off) to 255 (full bright).",
|
||||
"led.fadeIn": "Fades in the screen display.",
|
||||
"led.fadeIn|param|ms": "TODO",
|
||||
"led.fadeOut": "Fades out the screen brightness.",
|
||||
"led.fadeOut|param|ms": "TODO",
|
||||
"led.plot": "Turn on the specified LED using x, y coordinates (x is horizontal, y is vertical). (0,0) is upper left.",
|
||||
"led.plotAll": "Turns all LEDS on",
|
||||
"led.plotBarGraph": "Displays a vertical bar graph based on the `value` and `high` value.\nIf `high` is 0, the chart gets adjusted automatically.",
|
||||
"led.plotBarGraph|param|high": "maximum value. If 0, maximum value adjusted automatically, eg: 0",
|
||||
"led.plotBarGraph|param|value": "current value to plot",
|
||||
"led.plot|param|x": "TODO",
|
||||
"led.plot|param|y": "TODO",
|
||||
"led.point": "Get the on/off state of the specified LED using x, y coordinates. (0,0) is upper left.",
|
||||
"led.point|param|x": "TODO",
|
||||
"led.point|param|y": "TODO",
|
||||
"led.screenshot": "Takes a screenshot of the LED screen and returns an image.",
|
||||
"led.setBrightness": "Set the screen brightness from 0 (off) to 255 (full bright).",
|
||||
"led.setBrightness|param|value": "the brightness value, eg:255, 127, 0",
|
||||
"led.setDisplayMode": "Sets the display mode between black and white and greyscale for rendering LEDs.",
|
||||
"led.setDisplayMode|param|mode": "TODO",
|
||||
"led.stopAnimation": "Cancels the current animation and clears other pending animations.",
|
||||
"led.toggle": "Toggles a particular pixel",
|
||||
"led.toggleAll": "Inverts the current LED display",
|
||||
"led.toggle|param|x": "TODO",
|
||||
"led.toggle|param|y": "TODO",
|
||||
"led.unplot": "Turn off the specified LED using x, y coordinates (x is horizontal, y is vertical). (0,0) is upper left.",
|
||||
"led.unplot|param|x": "TODO",
|
||||
"led.unplot|param|y": "TODO",
|
||||
"music": "Generation of music tones through pin ``P0``.",
|
||||
"music.beat": "Returns the duration of a beat in milli-seconds",
|
||||
"music.changeTempoBy": "Change the tempo by the specified amount",
|
||||
"music.changeTempoBy|param|bpm": "The change in beats per minute to the tempo, eg: 20",
|
||||
"music.noteFrequency": "Gets the frequency of a note.",
|
||||
"music.noteFrequency|param|name": "the note name",
|
||||
"music.playTone": "Plays a tone through pin ``P0`` for the given duration.",
|
||||
"music.playTone|param|frequency": "pitch of the tone to play in Hertz (Hz)",
|
||||
"music.playTone|param|ms": "tone duration in milliseconds (ms)",
|
||||
"music.rest": "Rests (plays nothing) for a specified time through pin ``P0``.",
|
||||
"music.rest|param|ms": "rest duration in milliseconds (ms)",
|
||||
"music.ringTone": "Plays a tone through pin ``P0``.",
|
||||
"music.ringTone|param|frequency": "pitch of the tone to play in Hertz (Hz)",
|
||||
"music.setTempo": "Sets the tempo to the specified amount",
|
||||
"music.setTempo|param|bpm": "The new tempo in beats per minute, eg: 120",
|
||||
"music.tempo": "Returns the tempo in beats per minute. Tempo is the speed (bpm = beats per minute) at which notes play. The larger the tempo value, the faster the notes will play.",
|
||||
"pins": "Control currents in Pins for analog/digital signals, servos, i2c, ...",
|
||||
"pins.analogPitch": "Emits a Pulse-width modulation (PWM) signal to the current pitch pin. Use `analog set pitch pin` to define the pitch pin.",
|
||||
"pins.analogPitch|param|frequency": "TODO",
|
||||
"pins.analogPitch|param|ms": "TODO",
|
||||
"pins.analogReadPin": "Read the connector value as analog, that is, as a value comprised between 0 and 1023.",
|
||||
"pins.analogReadPin|param|name": "pin to write to",
|
||||
"pins.analogSetPeriod": "Configures the Pulse-width modulation (PWM) of the analog output to the given value in **microseconds** or `1/1000` milliseconds.\nIf this pin is not configured as an analog output (using `analog write pin`), the operation has no effect.",
|
||||
"pins.analogSetPeriod|param|micros": "period in micro seconds. eg:20000",
|
||||
"pins.analogSetPeriod|param|name": "analog pin to set period to",
|
||||
"pins.analogSetPitchPin": "Sets the pin used when using `pins->analog pitch`.",
|
||||
"pins.analogSetPitchPin|param|name": "TODO",
|
||||
"pins.analogWritePin": "Set the connector value as analog. Value must be comprised between 0 and 1023.",
|
||||
"pins.analogWritePin|param|name": "pin name to write to",
|
||||
"pins.analogWritePin|param|value": "value to write to the pin between ``0`` and ``1023``. eg:1023,0",
|
||||
"pins.digitalReadPin": "Read the specified pin or connector as either 0 or 1",
|
||||
"pins.digitalReadPin|param|name": "pin to read from",
|
||||
"pins.digitalWritePin": "Set a pin or connector value to either 0 or 1.",
|
||||
"pins.digitalWritePin|param|name": "pin to write to",
|
||||
"pins.digitalWritePin|param|value": "value to set on the pin, 1 eg,0",
|
||||
"pins.i2cReadNumber": "Read one number from 7-bit I2C address.",
|
||||
"pins.i2cWriteNumber": "Write one number to a 7-bit I2C address.",
|
||||
"pins.map": "Re-maps a number from one range to another. That is, a value of ``from low`` would get mapped to ``to low``, a value of ``from high`` to ``to high``, values in-between to values in-between, etc.",
|
||||
"pins.map|param|fromHigh": "the upper bound of the value's current range, eg: 1023",
|
||||
"pins.map|param|fromLow": "the lower bound of the value's current range",
|
||||
"pins.map|param|toHigh": "the upper bound of the value's target range, eg: 4",
|
||||
"pins.map|param|toLow": "the lower bound of the value's target range",
|
||||
"pins.map|param|value": "value to map in ranges",
|
||||
"pins.onPulsed": "Configures this pin to a digital input, and generates events where the timestamp is the duration that this pin was either ``high`` or ``low``.",
|
||||
"pins.pulseDuration": "Gets the duration of the last pulse in micro-seconds. This function should be called from a ``onPulsed`` handler.",
|
||||
"pins.servoSetPulse": "Configures this IO pin as an analog/pwm output, configures the period to be 20 ms, and sets the pulse width, based on the value it is given **microseconds** or `1/1000` milliseconds.",
|
||||
"pins.servoSetPulse|param|micros": "pulse duration in micro seconds, eg:1500",
|
||||
"pins.servoSetPulse|param|name": "pin name",
|
||||
"pins.servoWritePin": "Writes a value to the servo, controlling the shaft accordingly. On a standard servo, this will set the angle of the shaft (in degrees), moving the shaft to that orientation. On a continuous rotation servo, this will set the speed of the servo (with ``0`` being full-speed in one direction, ``180`` being full speed in the other, and a value near ``90`` being no movement).",
|
||||
"pins.servoWritePin|param|name": "pin to write to",
|
||||
"pins.servoWritePin|param|value": "angle or rotation speed, eg:180,90,0",
|
||||
"pins.setPull": "Configures the pull of this pin.",
|
||||
"pins.setPull|param|name": "pin to set the pull mode on",
|
||||
"pins.setPull|param|pull": "one of the mbed pull configurations: PullUp, PullDown, PullNone ",
|
||||
"serial": "Reading and writing data over a serial connection.",
|
||||
"serial.readLine": "Reads a line of text from the serial port.",
|
||||
"serial.redirect": "Dynamically configuring the serial instance to use pins other than USBTX and USBRX.",
|
||||
"serial.redirect|param|rx": "the new reception pin",
|
||||
"serial.redirect|param|tx": "the new transmission pins",
|
||||
"serial.writeLine": "Prints a line of text to the serial",
|
||||
"serial.writeNumber": "Prints a numeric value to the serial",
|
||||
"serial.writeString": "Sends a piece of text through Serial connection.",
|
||||
"serial.writeValue": "Writes a ``name: value`` pair line to the serial.",
|
||||
"serial.writeValue|param|name": "name of the value stream, eg: x",
|
||||
"serial.writeValue|param|value": "to write"
|
||||
}
|
||||
|
|
@ -1,240 +1,76 @@
|
|||
{
|
||||
"Math.randomBoolean": "Generates a `true` or `false` value randomly, just like flipping a coin.",
|
||||
"Math.randomBoolean|block": "pick random true or false",
|
||||
"Math|block": "Math",
|
||||
"String.fromCharCode": "Make a string from the given ASCII character code.",
|
||||
"String.fromCharCode|block": "text from char code %code",
|
||||
"String|block": "String",
|
||||
"basic": "Provides access to basic micro:bit functionality.",
|
||||
"basic.clearScreen": "Turn off all LEDs",
|
||||
"basic.clearScreen|block": "clear screen",
|
||||
"basic.forever": "Repeats the code forever in the background. On each iteration, allows other codes to run.",
|
||||
"basic.forever|block": "forever",
|
||||
"basic.pause": "Pause for the specified time in milliseconds",
|
||||
"basic.pause|block": "pause (ms) %pause",
|
||||
"basic.pause|param|ms": "how long to pause for, eg: 100, 200, 500, 1000, 2000",
|
||||
"basic.plotLeds": "Draws an image on the LED screen.",
|
||||
"basic.plotLeds|param|leds": "pattern of LEDs to turn on/off",
|
||||
"basic.showAnimation": "Shows a sequence of LED screens as an animation.",
|
||||
"basic.showAnimation|param|interval": "time in milliseconds between each redraw",
|
||||
"basic.showAnimation|param|leds": "pattern of LEDs to turn on/off",
|
||||
"basic.showLeds": "Draws an image on the LED screen.",
|
||||
"basic.showLeds|block": "show leds",
|
||||
"basic.showLeds|param|interval": "time in milliseconds to pause after drawing",
|
||||
"basic.showLeds|param|leds": "the pattern of LED to turn on/off",
|
||||
"basic.showNumber": "Scroll a number on the screen. If the number fits on the screen (i.e. is a single digit), do not scroll.",
|
||||
"basic.showNumber|block": "show|number %number",
|
||||
"basic.showNumber|param|interval": "speed of scroll; eg: 150, 100, 200, -100",
|
||||
"basic.showString": "Display text on the display, one character at a time. If the string fits on the screen (i.e. is one letter), does not scroll.",
|
||||
"basic.showString|block": "show|string %text",
|
||||
"basic.showString|param|interval": "how fast to shift characters; eg: 150, 100, 200, -100",
|
||||
"basic.showString|param|text": "the text to scroll on the screen, eg: \"Hello!\"",
|
||||
"basic|block": "basic",
|
||||
"control": "Runtime and event utilities.",
|
||||
"control.inBackground": "Schedules code that run in the background.",
|
||||
"control.inBackground|block": "run in background",
|
||||
"control.reset": "Resets the BBC micro:bit.",
|
||||
"control.reset|block": "reset",
|
||||
"control|block": "control",
|
||||
"game": "A single-LED sprite game engine",
|
||||
"game.addScore": "Adds points to the current score",
|
||||
"game.addScore|block": "change score by|%points",
|
||||
"game.addScore|param|points": "amount of points to change, eg: 1",
|
||||
"game.gameOver": "Displays a game over animation.",
|
||||
"game.gameOver|block": "game over",
|
||||
"game.score": "Gets the current score",
|
||||
"game.score|block": "score",
|
||||
"game.setScore": "Sets the current score value",
|
||||
"game.setScore|param|value": "TODO",
|
||||
"game.startCountdown": "Starts a game countdown timer",
|
||||
"game.startCountdown|block": "start countdown|(ms) %duration",
|
||||
"game.startCountdown|param|ms": "countdown duration in milliseconds, eg: 10000",
|
||||
"game|block": "game",
|
||||
"images": "Creation, manipulation and display of LED images.",
|
||||
"images.createBigImage": "Creates an image with 2 frames.",
|
||||
"images.createBigImage|block": "create big image",
|
||||
"images.createImage": "Creates an image that fits on the LED screen.",
|
||||
"images.createImage|block": "create image",
|
||||
"images|block": "images",
|
||||
"input": "Events and data from sensors",
|
||||
"input.acceleration": "Get the acceleration value in milli-gravitys (when the board is laying flat with the screen up, x=0, y=0 and z=-1024)",
|
||||
"input.acceleration|block": "acceleration (mg)|%NAME",
|
||||
"input.acceleration|param|dimension": "TODO",
|
||||
"input.buttonIsPressed": "Get the button state (pressed or not) for ``A`` and ``B``.",
|
||||
"input.buttonIsPressed|block": "button|%NAME|is pressed",
|
||||
"input.calibrate": "Obsolete, compass calibration is automatic.",
|
||||
"input.compassHeading": "Get the current compass compass heading in degrees.",
|
||||
"input.compassHeading|block": "compass heading (°)",
|
||||
"input.lightLevel": "Reads the light level applied to the LED screen in a range from ``0`` (dark) to ``255`` bright.",
|
||||
"input.lightLevel|block": "light level",
|
||||
"input.magneticForce": "Get the magnetic force value in ``micro-Teslas`` (``µT``). This function is not supported in the simulator.",
|
||||
"input.magneticForce|block": "magnetic force (µT)|%NAME",
|
||||
"input.magneticForce|param|dimension": "TODO",
|
||||
"input.onButtonPressed": "Do something when a button (``A``, ``B`` or both ``A+B``) is pressed",
|
||||
"input.onButtonPressed|block": "on button|%NAME|pressed",
|
||||
"input.onButtonPressed|param|body": "TODO",
|
||||
"input.onButtonPressed|param|button": "TODO",
|
||||
"input.onGesture": "Attaches code to run when the screen is facing up.",
|
||||
"input.onGesture|block": "on |%NAME",
|
||||
"input.onGesture|param|body": "TODO",
|
||||
"input.onLogoDown": "Attaches code to run when the logo is oriented downwards and the board is vertical.",
|
||||
"input.onLogoDown|param|body": "TODO",
|
||||
"input.onLogoUp": "Attaches code to run when the logo is oriented upwards and the board is vertical.",
|
||||
"input.onLogoUp|param|body": "TODO",
|
||||
"input.onPinPressed": "Do something when a pin(``P0``, ``P1`` or both ``P2``) is pressed.",
|
||||
"input.onPinPressed|block": "on pin|%NAME|pressed",
|
||||
"input.onPinPressed|param|body": "TODO",
|
||||
"input.onPinPressed|param|name": "TODO",
|
||||
"input.onScreenDown": "Attaches code to run when the screen is facing down.",
|
||||
"input.onScreenDown|param|body": "TODO",
|
||||
"input.onScreenUp": "Attaches code to run when the screen is facing up.",
|
||||
"input.onScreenUp|param|body": "TODO",
|
||||
"input.onShake": "Attaches code to run when the device is shaken.",
|
||||
"input.onShake|param|body": "TODO",
|
||||
"input.pinIsPressed": "Get the pin state (pressed or not). Requires to hold the ground to close the circuit.",
|
||||
"input.pinIsPressed|block": "pin %NAME|is pressed",
|
||||
"input.pinIsPressed|param|name": "pin used to detect the touch",
|
||||
"input.rotation": "The pitch of the device, rotation along the ``x-axis``, in degrees.",
|
||||
"input.rotation|block": "rotation (°)|%NAME",
|
||||
"input.rotation|param|kind": "TODO",
|
||||
"input.runningTime": "Gets the number of milliseconds elapsed since power on.",
|
||||
"input.runningTime|block": "running time (ms)",
|
||||
"input.setAccelerometerRange": "Sets the accelerometer sample range in gravities.",
|
||||
"input.setAccelerometerRange|block": "set accelerometer|range %range",
|
||||
"input.setAccelerometerRange|param|range": "a value describe the maximum strengh of acceleration measured",
|
||||
"input.temperature": "Gets the temperature in Celsius degrees (°C).",
|
||||
"input.temperature|block": "temperature (°C)",
|
||||
"input|block": "input",
|
||||
"led": "Control of the LED screen.",
|
||||
"led.brightness": "Get the screen brightness from 0 (off) to 255 (full bright).",
|
||||
"led.brightness|block": "brightness",
|
||||
"led.fadeIn": "Fades in the screen display.",
|
||||
"led.fadeIn|param|ms": "TODO",
|
||||
"led.fadeOut": "Fades out the screen brightness.",
|
||||
"led.fadeOut|param|ms": "TODO",
|
||||
"led.plot": "Turn on the specified LED using x, y coordinates (x is horizontal, y is vertical). (0,0) is upper left.",
|
||||
"led.plotAll": "Turns all LEDS on",
|
||||
"led.plotBarGraph": "Displays a vertical bar graph based on the `value` and `high` value.\nIf `high` is 0, the chart gets adjusted automatically.",
|
||||
"led.plotBarGraph|block": "plot bar graph of %value |up to %high",
|
||||
"led.plotBarGraph|param|high": "maximum value. If 0, maximum value adjusted automatically, eg: 0",
|
||||
"led.plotBarGraph|param|value": "current value to plot",
|
||||
"led.plot|block": "plot|x %x|y %y",
|
||||
"led.plot|param|x": "TODO",
|
||||
"led.plot|param|y": "TODO",
|
||||
"led.point": "Get the on/off state of the specified LED using x, y coordinates. (0,0) is upper left.",
|
||||
"led.point|block": "point|x %x|y %y",
|
||||
"led.point|param|x": "TODO",
|
||||
"led.point|param|y": "TODO",
|
||||
"led.screenshot": "Takes a screenshot of the LED screen and returns an image.",
|
||||
"led.setBrightness": "Set the screen brightness from 0 (off) to 255 (full bright).",
|
||||
"led.setBrightness|block": "set brightness %value",
|
||||
"led.setBrightness|param|value": "the brightness value, eg:255, 127, 0",
|
||||
"led.setDisplayMode": "Sets the display mode between black and white and greyscale for rendering LEDs.",
|
||||
"led.setDisplayMode|param|mode": "TODO",
|
||||
"led.stopAnimation": "Cancels the current animation and clears other pending animations.",
|
||||
"led.stopAnimation|block": "stop animation",
|
||||
"led.toggle": "Toggles a particular pixel",
|
||||
"led.toggleAll": "Inverts the current LED display",
|
||||
"led.toggle|param|x": "TODO",
|
||||
"led.toggle|param|y": "TODO",
|
||||
"led.unplot": "Turn off the specified LED using x, y coordinates (x is horizontal, y is vertical). (0,0) is upper left.",
|
||||
"led.unplot|block": "unplot|x %x|y %y",
|
||||
"led.unplot|param|x": "TODO",
|
||||
"led.unplot|param|y": "TODO",
|
||||
"led|block": "led",
|
||||
"music": "Generation of music tones through pin ``P0``.",
|
||||
"music.beat": "Returns the duration of a beat in milli-seconds",
|
||||
"music.beat|block": "%fraction|beat",
|
||||
"music.changeTempoBy": "Change the tempo by the specified amount",
|
||||
"music.changeTempoBy|block": "change tempo by (bpm)|%value",
|
||||
"music.changeTempoBy|param|bpm": "The change in beats per minute to the tempo, eg: 20",
|
||||
"music.noteFrequency": "Gets the frequency of a note.",
|
||||
"music.noteFrequency|block": "%note",
|
||||
"music.noteFrequency|param|name": "the note name",
|
||||
"music.playTone": "Plays a tone through pin ``P0`` for the given duration.",
|
||||
"music.playTone|block": "play|tone %note=device_note|for %duration=device_beat",
|
||||
"music.playTone|param|frequency": "pitch of the tone to play in Hertz (Hz)",
|
||||
"music.playTone|param|ms": "tone duration in milliseconds (ms)",
|
||||
"music.rest": "Rests (plays nothing) for a specified time through pin ``P0``.",
|
||||
"music.rest|block": "rest(ms)|%duration=device_beat",
|
||||
"music.rest|param|ms": "rest duration in milliseconds (ms)",
|
||||
"music.ringTone": "Plays a tone through pin ``P0``.",
|
||||
"music.ringTone|block": "ring tone (Hz)|%note=device_note",
|
||||
"music.ringTone|param|frequency": "pitch of the tone to play in Hertz (Hz)",
|
||||
"music.setTempo": "Sets the tempo to the specified amount",
|
||||
"music.setTempo|block": "set tempo to (bpm)|%value",
|
||||
"music.setTempo|param|bpm": "The new tempo in beats per minute, eg: 120",
|
||||
"music.tempo": "Returns the tempo in beats per minute. Tempo is the speed (bpm = beats per minute) at which notes play. The larger the tempo value, the faster the notes will play.",
|
||||
"music.tempo|block": "tempo (bpm)",
|
||||
"music|block": "music",
|
||||
"pins": "Control currents in Pins for analog/digital signals, servos, i2c, ...",
|
||||
"pins.analogPitch": "Emits a Pulse-width modulation (PWM) signal to the current pitch pin. Use `analog set pitch pin` to define the pitch pin.",
|
||||
"pins.analogPitch|param|frequency": "TODO",
|
||||
"pins.analogPitch|param|ms": "TODO",
|
||||
"pins.analogReadPin": "Read the connector value as analog, that is, as a value comprised between 0 and 1023.",
|
||||
"pins.analogReadPin|block": "analog read|pin %name",
|
||||
"pins.analogReadPin|param|name": "pin to write to",
|
||||
"pins.analogSetPeriod": "Configures the Pulse-width modulation (PWM) of the analog output to the given value in **microseconds** or `1/1000` milliseconds.\nIf this pin is not configured as an analog output (using `analog write pin`), the operation has no effect.",
|
||||
"pins.analogSetPeriod|block": "analog set period|pin %pin|to (µs)%micros",
|
||||
"pins.analogSetPeriod|param|micros": "period in micro seconds. eg:20000",
|
||||
"pins.analogSetPeriod|param|name": "analog pin to set period to",
|
||||
"pins.analogSetPitchPin": "Sets the pin used when using `pins->analog pitch`.",
|
||||
"pins.analogSetPitchPin|param|name": "TODO",
|
||||
"pins.analogWritePin": "Set the connector value as analog. Value must be comprised between 0 and 1023.",
|
||||
"pins.analogWritePin|block": "analog write|pin %name|to %value",
|
||||
"pins.analogWritePin|param|name": "pin name to write to",
|
||||
"pins.analogWritePin|param|value": "value to write to the pin between ``0`` and ``1023``. eg:1023,0",
|
||||
"pins.digitalReadPin": "Read the specified pin or connector as either 0 or 1",
|
||||
"pins.digitalReadPin|block": "digital read|pin %name",
|
||||
"pins.digitalReadPin|param|name": "pin to read from",
|
||||
"pins.digitalWritePin": "Set a pin or connector value to either 0 or 1.",
|
||||
"pins.digitalWritePin|block": "digital write|pin %name|to %value",
|
||||
"pins.digitalWritePin|param|name": "pin to write to",
|
||||
"pins.digitalWritePin|param|value": "value to set on the pin, 1 eg,0",
|
||||
"pins.i2cReadNumber": "Read one number from 7-bit I2C address.",
|
||||
"pins.i2cReadNumber|block": "i2c read number|at address %address|of format %format=i2c_sizeof",
|
||||
"pins.i2cWriteNumber": "Write one number to a 7-bit I2C address.",
|
||||
"pins.i2cWriteNumber|block": "i2c write number|at address %address|with value %value|of format %format=i2c_sizeof",
|
||||
"pins.map": "Re-maps a number from one range to another. That is, a value of ``from low`` would get mapped to ``to low``, a value of ``from high`` to ``to high``, values in-between to values in-between, etc.",
|
||||
"pins.map|block": "map %value|from low %fromLow|from high %fromHigh|to low %toLow|to high %toHigh",
|
||||
"pins.map|param|fromHigh": "the upper bound of the value's current range, eg: 1023",
|
||||
"pins.map|param|fromLow": "the lower bound of the value's current range",
|
||||
"pins.map|param|toHigh": "the upper bound of the value's target range, eg: 4",
|
||||
"pins.map|param|toLow": "the lower bound of the value's target range",
|
||||
"pins.map|param|value": "value to map in ranges",
|
||||
"pins.onPulsed": "Configures this pin to a digital input, and generates events where the timestamp is the duration that this pin was either ``high`` or ``low``.",
|
||||
"pins.onPulsed|block": "on|pin %pin|pulsed %pulse",
|
||||
"pins.pulseDuration": "Gets the duration of the last pulse in micro-seconds. This function should be called from a ``onPulsed`` handler.",
|
||||
"pins.pulseDuration|block": "pulse duration (µs)",
|
||||
"pins.servoSetPulse": "Configures this IO pin as an analog/pwm output, configures the period to be 20 ms, and sets the pulse width, based on the value it is given **microseconds** or `1/1000` milliseconds.",
|
||||
"pins.servoSetPulse|block": "servo set pulse|pin %value|to (µs) %micros",
|
||||
"pins.servoSetPulse|param|micros": "pulse duration in micro seconds, eg:1500",
|
||||
"pins.servoSetPulse|param|name": "pin name",
|
||||
"pins.servoWritePin": "Writes a value to the servo, controlling the shaft accordingly. On a standard servo, this will set the angle of the shaft (in degrees), moving the shaft to that orientation. On a continuous rotation servo, this will set the speed of the servo (with ``0`` being full-speed in one direction, ``180`` being full speed in the other, and a value near ``90`` being no movement).",
|
||||
"pins.servoWritePin|block": "servo write|pin %name|to %value",
|
||||
"pins.servoWritePin|param|name": "pin to write to",
|
||||
"pins.servoWritePin|param|value": "angle or rotation speed, eg:180,90,0",
|
||||
"pins.setPull": "Configures the pull of this pin.",
|
||||
"pins.setPull|block": "set pull|pin %pin|to %pull",
|
||||
"pins.setPull|param|name": "pin to set the pull mode on",
|
||||
"pins.setPull|param|pull": "one of the mbed pull configurations: PullUp, PullDown, PullNone ",
|
||||
"pins|block": "pins",
|
||||
"serial": "Reading and writing data over a serial connection.",
|
||||
"serial.readLine": "Reads a line of text from the serial port.",
|
||||
"serial.readLine|block": "serial read line",
|
||||
"serial.redirect": "Dynamically configuring the serial instance to use pins other than USBTX and USBRX.",
|
||||
"serial.redirect|block": "serial redirect to|TX %tx|RX %rx|at baud rate %rate",
|
||||
"serial.redirect|param|rx": "the new reception pin",
|
||||
"serial.redirect|param|tx": "the new transmission pins",
|
||||
"serial.writeLine": "Prints a line of text to the serial",
|
||||
"serial.writeLine|block": "serial|write line %text",
|
||||
"serial.writeNumber": "Prints a numeric value to the serial",
|
||||
"serial.writeNumber|block": "serial|write number %value",
|
||||
"serial.writeString": "Sends a piece of text through Serial connection.",
|
||||
"serial.writeString|block": "serial write string %text",
|
||||
"serial.writeValue": "Writes a ``name: value`` pair line to the serial.",
|
||||
"serial.writeValue|block": "serial|write value %name|= %value",
|
||||
"serial.writeValue|param|name": "name of the value stream, eg: x",
|
||||
"serial.writeValue|param|value": "to write",
|
||||
"serial|block": "serial"
|
||||
}
|
||||
Loading…
Reference in New Issue