154 lines
4.6 KiB
Markdown
154 lines
4.6 KiB
Markdown
# Seismograph Activity
|
||
|
||
|
||
### ~avatar avatar
|
||
|
||
In this project, you will build your own seismograph.
|
||
|
||
### ~
|
||
|
||
## What you'll need:
|
||
|
||
* micro:bit
|
||
* USB cable
|
||
* Plate
|
||
* Tape
|
||
* Scissors
|
||
|
||
Welcome! This activity will teach how to use the micro:bit to chart the strength of the acceleration. Let's get started!
|
||
|
||
Step 1. Prepare Tape: Measure and cut approximately 10mm of tape. The tape will be fastened to a micro USB cable.
|
||
|
||
![](/static/mb/lessons/seismograph0.png)
|
||
|
||
|
||
Step 2. Fasten Tape: Fasten tape to the micro USB cable and to the plate. Attach the micro:bit to the micro:bit USB.
|
||
|
||
![](/static/mb/lessons/seismograph0.png)
|
||
|
||
|
||
### ~avatar avatar
|
||
|
||
Seismograph built, let's code!
|
||
|
||
### ~
|
||
|
||
Step 1. Go to Codemicrobit.com
|
||
|
||
Click or tap New Project
|
||
Click or tap Blocks
|
||
|
||
|
||
Step 2.
|
||
|
||
We will measure `acceleration (mg)` in terms of strength or Magnitude. Get the acceleration value (milli g-force), as measured in strength or Magnitude.
|
||
|
||
```blocks
|
||
input.acceleration(Dimension.Strength);
|
||
```
|
||
|
||
|
||
Step 3.
|
||
|
||
Use the plot bar chart to visualize the acceleration on the LED screen of the micro:bit in the specified range. You implement plot Bar Graph to display a vertical bar graph based on the "value" and "high" value. Then you must insert acceleration in based on strength.
|
||
|
||
```blocks
|
||
basic.forever(() => {
|
||
led.plotBarGraph(input.acceleration(Dimension.Strength), 0);
|
||
});
|
||
|
||
```
|
||
|
||
### ~
|
||
|
||
Step 4.
|
||
|
||
Finally, we subtract the gravity from acceleration strength.
|
||
|
||
```blocks
|
||
basic.forever(() => {
|
||
led.plotBarGraph(input.acceleration(Dimension.Strength) - 1023, 0);
|
||
});
|
||
|
||
```
|
||
|
||
### ~
|
||
|
||
Step 5.
|
||
|
||
Notice that making moving the object below the micro:bit changes the values and the line appears as a wave to display the value of the strength as measured in milli-gravities. By making the object below the micro:bit vibrate, you will observe changing values of the micro:bit. Also, the LEDs shown on the Bar Graph fluctates based on the movement of the micro:bit strength.
|
||
|
||
NOTE: The black color reflects the micro:bit device.
|
||
|
||
![](/static/mb/data4.png)
|
||
|
||
|
||
### ~
|
||
|
||
Step 6.
|
||
|
||
Vigorously move the micro:bit in the micro:bit simulatator by moving the micro:bit image from side to side. Every time the micro:bit moves in the x direction in the simulator, you are generating data points that can be reviewed in Excel. The more attempts to move the micro:bit from side to side, the more data being saved in Excel. After you have vigarously moved the micro:bit simulator from side to side for a sufficient amount of time, you are ready to graph or chart the accceleration of the micro:bit. We want a printout of our acceleration on Excel that can be graphed in Excel.
|
||
|
||
|
||
### ~
|
||
|
||
Step 7.
|
||
|
||
We want to chart the data collected by using a tool in Excel.
|
||
|
||
The final part of this experiment is opening and reviewing the data in the Excel CSV file. Simply click on the line beneath the simulator. A CSV file will be generated to display the data points collected by moving the micro:bit in the X direction. Then click or tap on the data Excel file that was downloaded to your local Downloads Folder.
|
||
|
||
|
||
### ~
|
||
|
||
Step 8.
|
||
|
||
|
||
First, click or tap on the first two columns (A, B) to include the time of the data being collected; b) the results of acceleration data on the micro:bit
|
||
|
||
![](/static/mb/data7.png)
|
||
|
||
Use the Recommended Charts command on the Insert tab to quickly create a chart that’s just right for your data.
|
||
|
||
* Select the data that you want to include in your chart.
|
||
|
||
* Click Insert > Recommended Charts.
|
||
|
||
### ~
|
||
|
||
Step 9.
|
||
|
||
|
||
![](/static/mb/chart1.png)
|
||
|
||
* On the Recommended Charts tab, scroll through the list of chart types that Excel recommends for your data.
|
||
|
||
Click any chart type to see how your data will look in that format.
|
||
|
||
When you find the chart type that you want, click it, and then click OK. We want to select the chart called Line. A line chart is used to display trends over time. We will use the line chart because there are many data points over time.
|
||
|
||
Tip: If you don’t see a chart type that you want, click the All Charts tab to see all of the available chart types.
|
||
|
||
### ~
|
||
|
||
Step 10.
|
||
|
||
![](/static/mb/chart_title.png)
|
||
|
||
* Use the Chart Elements, Chart Styles, and Chart Filters buttons next to the upper-right corner of the chart to add chart elements like axis titles or data labels, to customize the look of your chart
|
||
|
||
### ~
|
||
|
||
Step 11.
|
||
|
||
![](/static/mb/elements_styles_filters.png)
|
||
|
||
* Connect a micro:bit to your computer using your USB cable; compile; and repeat this experiment by vibrating the micro:bit. Then chart the data on Excel.
|
||
|
||
### ~avatar avatar
|
||
|
||
Excellent, you're ready to continue with the [challenges](/lessons/seismograph/challenge)
|
||
|
||
### ~
|
||
|