pxt-calliope/docs/reference/pins/set-pull.md
2016-11-01 17:44:37 -07:00

952 B

Set Pull

Configure the electrical pull of the specified pin.

Many @boardname@ pins can be configured as pull-ups. For example, a pull-up can set a pin's voltage to high (3.3 volts, or 1 when calling digital read pin). If one end of a button is connected to P0 (set to high) and the other end is connected to GND (0 volts), then when you press the button, P0 is driven to 0 volts, and the @boardname@ software can detect a button press.

pins.setPull(DigitalPin.P9, PinPullMode.PullDown);

Parameters

  • name: The @boardname@ hardware pin to configure (P0-P20)
  • pull: The pull to which to set the pin (down, up, or none)

Example

The following example sets the pull of pin P0 to up (high).

pins.setPull(DigitalPin.P0, PinPullMode.PullUp);

See also

@boardname@ | mbed