* change simulator svg

* change radio image

* Remove google fonts cdn

* change color of 'advanced' button

* font fix

* font fix 2

* display fix

* change fullsceen simulator bg

* Continuous servo

* handle continuous state

* adding shims

* update rendering for continuous servos

* fixing sim

* fix sig

* typo

* fix sim

* bump pxt

* bump pxt

* rerun travis

* Input blocks revision

- add Button and Pin event types
- merge onPinPressed & onPinReleased in new onPinEvent function
- create new onButtonEvent function

* update input blocks in docs and tests

* remove device_pin_release block

* Hide DAL.x behind Enum

* bring back deprecated blocks, but hide them

* shims and locales files

* fix input.input. typing

* remove buildpr

* bump V3

* update simulator aspect ratio

* add Loudness Block

* revoke loudness block

* Adds soundLevel

To be replaced by pxt-common-packages when DAL is updated.

* Remove P0 & P3 from AnalogPin

Co-authored-by: Juri <gitkraken@juriwolf.de>

2020-09-08 02:04:25 -07:00

1000 B

Raw Blame History

Set Pull

Configure the electrical pull of the specified pin.

Many @boardname@ pins can be configured as pull-ups. For example, a pull-up can set a pin's voltage to high (3.3 volts, or 1 when calling digital read pin). If one end of a button is connected to P0 (set to high) and the other end is connected to GND (0 volts), then when you press the button, P0 is driven to 0 volts, and the @boardname@ software can detect a button press.

pins.setPull(DigitalPin.C9, PinPullMode.PullDown);

The pull-up and -down resistors are about 13kOhm.

Parameters

name: The @boardname@ hardware pin to configure (P0-P20)
pull: The pull to which to set the pin (down, up, or none)

Example

The following example sets the pull of pin P0 to up (high).

pins.setPull(DigitalPin.P0, PinPullMode.PullUp);

1000 B Raw Blame History

Set Pull

Parameters

Example

See also

1000 B

Raw Blame History