98 lines
3.0 KiB
Markdown
98 lines
3.0 KiB
Markdown
# Code
|
|
|
|
You will need to get a pot of dry dirt and wet dirt for the coding.
|
|
|
|
## Step 1: Measuring moisture
|
|
|
|
|
|
|
|
The soil acts as a variable resistor based on the amount of water and nutrient.
|
|
The water is not conductive but the nutrient are, so more water, more nutrient, so the soil will be less resistive.
|
|
|
|
To measure this, we read the voltage on pin ``P0`` using [analog read pin](/reference/pins/analog-read-pin)
|
|
which returns a value between ``0`` (no current) and ``1023`` (max current). The value is graph on the screen
|
|
using [led plot bar graph](/reference/led/plot-bar-graph).
|
|
|
|
```blocks
|
|
basic.forever(() => {
|
|
led.plotBarGraph(
|
|
pins.analogReadPin(AnalogPin.P0),
|
|
1023
|
|
)
|
|
})
|
|
```
|
|
|
|
### Experiment!
|
|
|
|
* insert the nails in the dry dirt and you should see most LEDs off
|
|
* insert the nail in the wet dirt and you should see most LEDs on
|
|
|
|
## Step 2: Sensor data values
|
|
|
|
In the previous program, we only have a rough idea of the value of the sensor... since it is using a tiny screen
|
|
to display it! Let's add code that displays the current reading when button ``A`` is pressed.
|
|
|
|
This code has to be inserted in the forever loop. We've also added a variable ``reading`` to store the reading value.
|
|
|
|
```blocks
|
|
let reading = 0
|
|
basic.forever(() => {
|
|
reading = pins.analogReadPin(AnalogPin.P0)
|
|
led.plotBarGraph(
|
|
reading,
|
|
1023
|
|
)
|
|
if (input.buttonIsPressed(Button.A)) {
|
|
basic.showNumber(reading)
|
|
}
|
|
})
|
|
```
|
|
|
|
### Experiment!
|
|
|
|
* insert the nails in the dry dirt, press ``A`` and note the value. You should see a value close to ``250``
|
|
for dry dirt.
|
|
* insert the nails in the wet dirt, press ``B`` and note the value. You should see a value close to ``1000``
|
|
for dry dirt.
|
|
|
|
https://youtu.be/S8NppVT_paw
|
|
|
|
## Step 3: Don't waste energy!
|
|
|
|
|
|
|
|
We want our probe to work for a long time on batteries so we need to tweak our code to save energy.
|
|
|
|
* Our circuit connects directly to the ``3v`` pin so it is always using electricity. Instead,
|
|
we will connect it to ``P1`` and turn that pin high only while the measurement is taken.
|
|
This saves electricty and also avoids corrosion of the probes.
|
|
* We will also lower the brightness of the screen to lower the energy consumption from the LEDs.
|
|
* Soil moisture changes very slowly so we don't need to measure all the times!!! Let's add a **sleep** of 5 seconds in the loop as well.
|
|
|
|
```blocks
|
|
led.setBrightness(64)
|
|
let reading = 0
|
|
basic.forever(() => {
|
|
pins.analogWritePin(AnalogPin.P1, 1023)
|
|
reading = pins.analogReadPin(AnalogPin.P0)
|
|
pins.analogWritePin(AnalogPin.P1, 0)
|
|
led.plotBarGraph(
|
|
reading,
|
|
1023
|
|
)
|
|
if (input.buttonIsPressed(Button.A)) {
|
|
basic.showNumber(reading)
|
|
}
|
|
basic.pause(5000);
|
|
})
|
|
```
|
|
|
|
### Experiment!
|
|
|
|
* using the dry and wet dirt pots, test that your ciruit still works. Remember you'll have to wait up to 10 seconds to see a change!
|
|
|
|
### ~button /projects/soil-moisture/connect
|
|
|
|
Connect
|
|
|
|
### ~ |