pxt-calliope/docs/reference/pins/set-pull.md
2016-07-05 14:04:12 -07:00

33 lines
945 B
Markdown

# Set Pull
Configure the electrical pull of the specified pin.
Many micro:bit pins can be configured as _pull-ups_. For example, a
pull-up can set a pin's voltage to high (3.3 volts, or `1` when
calling [digital read pin](/reference/pins/digital-read-pin)). If one
end of a button is connected to ``P0`` (set to high) and the other end
is connected to ``GND`` (0 volts), then when you press the button,
``P0`` is driven to 0 volts, and the micro:bit software can detect a
button press.
```sig
pins.setPull(DigitalPin.P9, PinPullMode.PullDown);
```
### Parameters
* ``pin``: The micro:bit hardware pin to configure (``P0``-``P20``)
* ``to``: The pull to which to set the pin (**down**, **up**, or **none**)
### Example
The following example sets the pull of pin ``P0`` to **up** (high).
```blocks
pins.setPull(DigitalPin.P0, PinPullMode.PullUp);
```
### See also
[BBC micro:bit | mbed](https://developer.mbed.org/platforms/Microbit/)