Michael Elliot Braun a427a1e720 update csv

2016-04-25 15:35:26 -07:00

5.6 KiB

Raw Blame History

charting activity

Measure the acceleration on the micro:bit in the "x" direction.

~avatar avatar

Welcome! This activity will teach how to use the micro:bit to chart the second micro:bit's acceleration in the "x" direction. Let's get started!

~

Let's measure acceleration (mg) in the "x" direction. Get the acceleration value (milli g-force), in one of three specified dimensions.

input.acceleration(Dimension.X)

~

Use the plot bar chart to visualize the acceleration on the LED screen of the micro:bit in the specified range. You implement plot Bar Graph to display a vertical bar graph based on the "value" and "high" value. Then you must insert acceleration in the X dimension to measure the acceleration.

basic.forever(() => {
    led.plotBarGraph(input.acceleration(Dimension.X), 0)
})

~

Notice that moving the micro:bit in the simulator from left to right (x direction) changes the values beneath the micro:bit in a range from 1023 to -1023 as measured in milli-gravities. By hovering over the micro:bit from left to right, you can observe changing values beneath the micro:bit simulator. Also, the LEDs shown on the Bar Graph fluctates based on the movement of the micro:bit simulator in the x direction. The line underneath the micro:bit simulator reflect the acceleration in the x direction.

~

NOTE: The colors of the charts reflect the color of the micro:bit simulator. In this instance, the micro:bit is yellow. So the color of the data line reflects the color of the micro:bit

After running this simulatation several seconds by moving the micro:bit side to side in the x direction, you are ready to graph or chart the accceleration of the micro:bit. We want a printout of our acceleration on Excel. We will graph the fluctuating acceleration of the simulation experiment.

~

Finally, you must open the Excel CSV file by clicking on the data.xls file that was downloaded to Downloads Folder.

~

Have fun reviewing your simulation and analyze the acceleration by chart the Excel data using Excel.

Connect the first micro:bit to your computer using your USB cable and run the charting script on it.

~avatar avatar

Welcome! The activity will teach you how to use the acceleration of the 1st micro:bit and return the acceleration value in a visual graphing display using the 2nd micro:bit. Let's get started!

~

Let's measure acceleration (mg) and then send number. Acceleration is measured in milli-gravities, so a value of -1000 is equivalent to -1g or -9.81m/s^2. We will be able to get the acceleration value (g-force), in the specified "x" dimension. Send number will broadcast a number data packet to other micro:bits connected via radio.

radio.sendNumber(input.acceleration(Dimension.X));

~

We want to display the acceleration forever. In order to do so, we need a forever loop. A forever loop will repeat code in the background forever.

basic.forever(() => {
    radio.sendNumber(input.acceleration(Dimension.X));
});

~

We want to register code to run when a packet is received over radio. We can implement this code by adding on data received.

basic.forever(() => {
    radio.sendNumber(input.acceleration(Dimension.X))
})
radio.onDataReceived(() => {
    
})

~

Finally, we want to chart the acceleration. So we must first implement plot bar graph. Plot Bar Graph will display a vertical bar graph based on the value and high value. In order to transfer the receive the number from the 1st micro:bit, we must implement receive number to constantly display a vertical bar graph based on the value. Remember, the value will equal to the micro:bit's acceleration in the "x" direction.

basic.forever(() => {
    radio.sendNumber(input.acceleration(Dimension.X))
})
radio.onDataReceived(() => {
    led.plotBarGraph(radio.receiveNumber(), 1023)
})

~

Notice that moving the micro:bit the farthest direction in the x direction will be -1023 on the charting beneath the simulator. The second observation will be that the LEDs will be full brightness on the 2nd micro:bit. There is a single LED turned on with the 1st micro:bit. Additionally, the graphs will reflect 0 acceleation for the 1st micro:bit. In this scenario, if you are adjusting the acceleration in the simualator, you are also changing your chart that will be produced.

~

NOTE: The colors of the charts reflect the color of the micro:bit simulator. In this instance, the micro:bits are blue and green. So the colors of the line graphs reflect the colors of the micro:bit

~

Finally, you must open the Excel CSV file by clicking on the data.xls file that was downloaded to Downloads Folder.

~

Have fun reviewing your simulation and analyze the acceleration by chart the Excel data using Excel.

Connect the first micro:bit to your computer using your USB cable and run the charting script on it.
Connect the second micro:bit to your computer using your USB cable and run the charting script on it.
The first person and second person take turns tilting the micro:bit in the "x" direction while the other player charts the data on the micro:bit!
Review and analyze the actual micro:bit device acceleration data on Excel

5.6 KiB Raw Blame History

charting activity

~avatar avatar

~

~

~

~

~

~

~avatar avatar

~

~

~

~

~

~

~

~

~

5.6 KiB

Raw Blame History