Galen Nickel 350a98b429 Fixes to a couple of projects (#573 )

* local commit

* Fixes to a couple of projects

2017-11-27 19:14:03 -08:00

1.9 KiB

Raw Blame History

Code

@description code to make the Milky Monster alive

~avatar avatar

Add code to make the Milky Monster move.

~

Duration: ~30 minutes

Step 1: Calibrate servo

In order for the Milky Monster to move, the @boardname@ needs to command the servo to go between 0 and 180 degrees at a certain pace. In the code below:

Press button A to switch the servo to 180 degrees (to close the mouth of Milky Monster).
Press button B to switch the servo to 0 degrees (to open the mouth of Milky Monster).

input.onButtonPressed(Button.A, () => {
    pins.servoWritePin(AnalogPin.P0, 180)
    basic.showNumber(180)
})
input.onButtonPressed(Button.B, () => {
    pins.servoWritePin(AnalogPin.P0, 0)
    basic.showNumber(0)
})
basic.showString("calibrate")

Step 2: Attach rotor

The servo should be positioned at 180 degrees before attaching the rotor to it. This will make sure the mouth of the Milky Monster is closed once the servo reaches 180 degrees.

~ hint

You can use a philips screw driver to attach the rotor to the servo.

~

https://youtu.be/YZfkMWTeH4o

Step 3: Check calibration

When the user presses A the servo rotor should be in 'up' position.

https://youtu.be/bAqXEawUsSM

Step 4: Connect cord to rotor

Connect the cord to the servo rotor while mouth of Milky Monster is closed.

https://youtu.be/AWsnwk_iA_A

Step 5: Connect cables to @boardname@

Connect cables from @boardname@ to the servo and place the battery.

https://youtu.be/fAR58GJUZdM

Step 6: Code light sensor

Code the light sensor on the @boardname@ to control the servo.

basic.forever(() => {
    pins.servoWritePin(AnalogPin.P0, input.lightLevel())
    led.plotBarGraph(
        input.lightLevel(),
        0
    )
})

Step 6: Ready!

Your Milky Monster is ready!

https://youtu.be/egl3fNAYylk

~button /projects/milky-monster/connect

NEXT: Connect

1.9 KiB Raw Blame History