42 lines
1.3 KiB
Markdown
42 lines
1.3 KiB
Markdown
# Analog Read Pin
|
|
|
|
Read an **analog** signal (`0` through `1023`) from the
|
|
[pin](/device/pins) you say.
|
|
|
|
```sig
|
|
pins.analogReadPin(AnalogPin.P0)
|
|
```
|
|
|
|
## Parameters
|
|
|
|
* ``name`` is a [string](/types/string) with the name of the pin
|
|
you say (`P0` through `P4`, or `P10`)
|
|
|
|
## Returns
|
|
|
|
* a [number](/types/number) from `0` through `1023`
|
|
|
|
This program reads pin `P1` and shows the number
|
|
on the LED screen.
|
|
|
|
```blocks
|
|
basic.forever(() => {
|
|
let value = pins.analogReadPin(AnalogPin.P1)
|
|
basic.showNumber(value)
|
|
});
|
|
```
|
|
|
|
### ~hint
|
|
|
|
If you are using **analog read pin** with another @boardname@ running **analog write pin**, then things can get tricky. Remember that the @boardname@ that runs **analog set pin** writes 0's and 1's at a very high frequency to achieve an average of the desired value. Sadly, if you try to read that average from another @boardname@, then the @boardname@ will either read 0 or 1023. You could try to read a higher number of values (e.g. a million) in a loop, then computer then average. Alternatively, you can plug in a capacitor in-between the two @boardname@s.
|
|
|
|
### ~
|
|
|
|
## See also
|
|
|
|
[@boardname@ pins](/device/pins),
|
|
[on pin pressed](/reference/input/on-pin-pressed),
|
|
[analog write pin](/reference/pins/analog-write-pin),
|
|
[digital read pin](/reference/pins/digital-read-pin),
|
|
[digital write pin](/reference/pins/digital-write-pin)
|