pxt-calliope/docs/reference/pins/analog-read-pin.md
2016-11-10 13:08:45 -08:00

1.4 KiB

Analog Read Pin

Read an analog signal (0 through 1023) from the pin you say.

pins.analogReadPin(AnalogPin.P1)

Parameters

  • name is a string with the name of the pin you say (P0 through P4, or P10)

Returns

  • a number from 0 through 1023

This program reads pin P1 and shows the number on the LED screen.

basic.forever(() => {
    let value = pins.analogReadPin(AnalogPin.P1)
    basic.showNumber(value)
});

~hint

If you are using analog read pin with another @boardname@ running analog write pin, then things can get tricky. Remember that the @boardname@ that runs analog set pin writes 0's and 1's at a very high frequency to achieve an average of the desired value. Sadly, if you try to read that average from another @boardname@, then the @boardname@ will either read 0 or 1023. You could try to read a higher number of values (e.g. a million) in a loop, then computer then average. Alternatively, you can plug in a capacitor in-between the two @boardname@s.

~

See also

@boardname@ pins, on pin pressed, analog write pin, digital read pin, digital write pin