95 lines
4.5 KiB
Markdown
95 lines
4.5 KiB
Markdown
# Challenge
|
||
|
||
### ~avatar avatar
|
||
|
||
Welcome! The activity will teach you how to use the acceleration of the 1st micro:bit and to visualize the acceleration on the 2nd micro:bit. Let's get started!
|
||
|
||
### ~
|
||
Let's measure `acceleration (mg)` and then `send number`. `Acceleration` is measured in **milli-gravities**, so a value of -1000 is equivalent to -1g or -9.81m/s^2. We will be able to get the acceleration value (g-force), in the specified "x" dimension. `Send number` will broadcast a number data packet to other micro:bits connected via radio.
|
||
|
||
```blocks
|
||
radio.sendNumber(input.acceleration(Dimension.X));
|
||
```
|
||
### ~
|
||
We want to display the acceleration forever. In order to do so, we need a `forever` loop. A forever loop will repeat code in the background forever.
|
||
|
||
```blocks
|
||
basic.forever(() => {
|
||
radio.sendNumber(input.acceleration(Dimension.X));
|
||
});
|
||
|
||
|
||
```
|
||
### ~
|
||
We want to register code to run when a packet is received over radio. We can implement this code by adding `on data received`.
|
||
|
||
```blocks
|
||
basic.forever(() => {
|
||
radio.sendNumber(input.acceleration(Dimension.X))
|
||
})
|
||
radio.onDataReceived(() => {
|
||
|
||
})
|
||
```
|
||
### ~
|
||
Finally, we want to chart the acceleration. So we must first implement `plot bar graph`. `Plot Bar Graph` will display a vertical bar graph based on the value and high value. In order to transfer the receive the number from the 1st micro:bit, we must implement `receive number` to constantly display a vertical bar graph based on the value. Remember, the value will equal to the micro:bit's acceleration in the "x" direction.
|
||
|
||
```blocks
|
||
basic.forever(() => {
|
||
radio.sendNumber(input.acceleration(Dimension.X))
|
||
})
|
||
radio.onDataReceived(() => {
|
||
led.plotBarGraph(radio.receiveNumber(), 1023)
|
||
})
|
||
|
||
```
|
||
### ~
|
||
Notice that moving the micro:bit the farthest direction in the x direction will be -1023 on the charting beneath the simulator. The second observation will be that the LEDs will be full brightness on the 2nd micro:bit. There is a single LED turned on with the 1st micro:bit. Additionally, the graphs will reflect 0 acceleation for the 1st micro:bit. In this scenario, if you are adjusting the acceleration in the simualator, you are also changing your chart that will be produced.
|
||
|
||
|
||
|
||
### ~
|
||
NOTE: The colors of the charts reflect the color of the micro:bit simulator. In this instance, the micro:bits are blue and green. So the colors of the line graphs reflect the colors of the micro:bit
|
||
|
||
### ~
|
||
After running this simulatation several seconds by moving the micro:bit side to side in the x direction, you are ready to graph or chart the accceleration of the micro:bit. We want a printout of our acceleration on Excel. We will graph the fluctuating acceleration of the simulation experiment.
|
||
|
||
|
||
|
||
### ~
|
||
Finally, you must open the Excel CSV file by clicking on the data.xls file that was downloaded to Downloads Folder.
|
||
|
||
|
||
|
||
Use the Recommended Charts command on the Insert tab to quickly create a chart that’s just right for your data.
|
||
|
||
* Select the data that you want to include in your chart.
|
||
|
||
* Click Insert > Recommended Charts.
|
||
|
||
|
||
|
||
* On the Recommended Charts tab, scroll through the list of chart types that Excel recommends for your data.
|
||
|
||
Click any chart type to see how your data will look in that format.
|
||
|
||
When you find the chart type that you want, click it, and then click OK. We want to select the chart called Line. A line chart is used to display trends over time. We will use the line chart because there are many data points over time.
|
||
|
||
Tip: If you don’t see a chart type that you want, click the All Charts tab to see all of the available chart types.
|
||
|
||
|
||
|
||
* Use the Chart Elements, Chart Styles, and Chart Filters buttons next to the upper-right corner of the chart to add chart elements like axis titles or data labels, to customize the look of your chart
|
||
|
||
|
||
|
||
### ~
|
||
Have fun reviewing your simulation and analyze the acceleration by chart the Excel data using Excel.
|
||
|
||
* Connect the first micro:bit to your computer using your USB cable and run the charting script on it.
|
||
* Connect the second micro:bit to your computer using your USB cable and run the charting script on it.
|
||
* The first person and second person take turns tilting the micro:bit in the "x" direction while the other player charts the data on the micro:bit!
|
||
* Review and analyze the actual micro:bit device acceleration data on Excel
|
||
* Display acceleration with y or z using plot bar graph by changing acceleration from "x" to "y" or "z"
|
||
|