121 lines
2.9 KiB
Markdown
121 lines
2.9 KiB
Markdown
# Make
|
|
|
|
## @description Building the cardboard Milky Monster
|
|
|
|
## ~avatar avatar
|
|
|
|
Turn a drink carton into an milky-monster!
|
|
|
|
|
|
|
|
## ~
|
|
|
|
## Duration: ~45 minutes
|
|
|
|
## Materials
|
|
|
|
### Recycled
|
|
|
|
* 1 Milk Carton (with a screwable top cap)
|
|
* 1 Small cord - recycle string from a used tea bag
|
|
* 1 Paper clip
|
|
|
|
### Electronics
|
|
|
|
* 1 @boardname@, battery holder and 2 AAA batteries
|
|
* 3 Crocodile clips
|
|
* 1 micro servo - 9g SG90
|
|
* 1 servo clip designed for Milky Monster, download at [thingiverse](http://www.thingiverse.com/thing:2185971) (optional). Teachers may prefer to download the classroom pack (16 servo clips).
|
|
|
|
### Tools
|
|
|
|
* Small knife and scissors that can cut cardboard
|
|
* Tape (masking, duct tape, and/or packing tape)
|
|
* Glue gun
|
|
|
|
## Step 1: Download and cut the template
|
|
|
|
[Download the template](/static/mb/projects/milky-monster/template.pdf) and cut out the template.
|
|
|
|
https://youtu.be/ipsZuFNgTHM
|
|
|
|
## Step 2: Glue the template onto the milk carton
|
|
|
|
Glue the template on the milk carton.
|
|
|
|
https://youtu.be/2D3WFp29QC4
|
|
|
|
## Step 3: Cut carton
|
|
|
|
Cut the carton (watch the fingers!)
|
|
|
|
https://youtu.be/pvC3Tnhe5QU
|
|
|
|
## Step 4: Create the mouth
|
|
|
|
Cut the cardboard halfway and fold the corners. This forms the mouth of the Milky Monster.
|
|
|
|
https://youtu.be/Yyk1zW4sFoM
|
|
|
|
## Step 5: Extend the mouth
|
|
|
|
Use tape to extend the mouth approx 1 cm. Fold one after the other.
|
|
|
|
https://youtu.be/RWJbqI03wPE
|
|
|
|
## Step 6: Connect cord
|
|
|
|
Using scissors, create a small whole to insert the cord. Tape the cord on the back side of the mouth.
|
|
|
|
|
|
|
|
Once finished position the mouth in upward position and fix the cord between the cap.
|
|
https://youtu.be/Qyndcsmt0AU
|
|
|
|
## Step 7: Create space for @boardname@
|
|
|
|
Use scissors to create space at the bottom of the Milky Monster to attach the @boardname@.
|
|
|
|
https://youtu.be/3FUNI0GSbNc
|
|
|
|
## Step 8: Create space for cables
|
|
|
|
Create space to route the cables nicely on back of the milky-monster.
|
|
|
|
https://youtu.be/BoIRCk769MM
|
|
|
|
## Step 9: Attaching clip to servo
|
|
|
|
Use a philips screw driver to mount the servo to the 3D-printed servo clip.
|
|
If you don't have the 3D-printed clips available, download on [thingiverse](http://www.thingiverse.com/thing:2185971), or fix the servo using tie wraps or a glue gun.
|
|
|
|
https://youtu.be/drKzo5zqvuI
|
|
|
|
## Step 10: Attaching servo to milk button
|
|
|
|
Glue servo to the cap of the milk carton.
|
|
|
|
https://youtu.be/Ch_vU5LXPeM
|
|
|
|
## Step 11: Cut out a hole in cap
|
|
|
|
Cut out a hole in the cap to guide the string to the servo.
|
|
|
|
https://youtu.be/JKi2Ns8y3nI
|
|
|
|
## Step 12: Connect crocodile clips
|
|
|
|
Connect the crocodile clips to the servo.
|
|
|
|
https://youtu.be/RiQE-9z9LrI
|
|
|
|
|
|
## It's ready!
|
|
|
|
Your milky-monster is ready, it is time to decorate it! Customize the milky monster to your taste!
|
|
|
|
|
|
|
|
## ~button /projects/milky-monster/code
|
|
NEXT: Code
|
|
## ~ |