Change drive label to EV3 (#494)
This commit is contained in:
parent
bd3b149dcc
commit
90717cfc33
BIN
docs/static/setup/ev3-drive-windows.png
vendored
BIN
docs/static/setup/ev3-drive-windows.png
vendored
Binary file not shown.
Before Width: | Height: | Size: 68 KiB After Width: | Height: | Size: 63 KiB |
@ -25,9 +25,9 @@ Make sure that one end of your USB cable is firmly inserted into the port on the
|
||||
If you think your USB connection is good and you still can't see your **@drivename@** drive, try giving the brick a reset. You can follow these steps to reset:
|
||||
|
||||
1. Using a finger from one hand, press the **Back** button. Keep holding it.
|
||||
2. With your other hand, use two fingers to hold down both the **Left** button and the **Enter** button. You hold these at the same time while your still pressing the **Back** button.
|
||||
2. With your other hand, use two fingers to hold down both the **Left** button and the **Enter** button. You hold these at the same time while you're still pressing the **Back** button.
|
||||
3. Now, release your finger from the **Back** button.
|
||||
4. When the brick says "Starting..." you can let go of the **Left** and **Enter** buttons.
|
||||
4. When the brick says "Starting.." you can let go of the **Left** and **Enter** buttons.
|
||||
|
||||
You can also watch this [How to Reset](https://www.lego.com/en-us/videos/themes/mindstorms/how-to-reset-the-ev3-p-brick-fbcbdbed398e4e12a7ce30fa662c54be) video to see how to do a reset.
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user