0.0.7

brick/README.md

@@ -11,8 +11,9 @@ they are derived from GPLv2 code).
 * the `d_usbdev` uses the composite framework to register an additional mass storage function in addtion
   to the pre-existing custom USB HID function
 * the `g_mass_storage` module has the following changes:
-  * a bug fixed, where page-misaligned writes would hang
   * additional `/sys/.../lun0/active` entry is added, which allows for signaling drive eject to the host
+* `d_usbdev` has an additional `ioctl()` to pretend data came from the USB host - this can be used to direct
+  the VM to do stuff
 
 ### Kernel modifications
 

brick/ins

@@ -5,6 +5,6 @@ cd /mnt/ramdisk/prjs/ko
 #echo 3 > /proc/sys/kernel/printk
 insmod ./nbd.ko
 sleep 1
-./uf2d > /tmp/uf2d.log 2> /tmp/uf2derr.log
+./uf2d /dev/nbd1 > /tmp/uf2d.log 2> /tmp/uf2derr.log
 sleep 1
-insmod ./d_usbdev.ko file=/dev/nbd0 HostStr=EV3 SerialStr=0016535543af
+insmod ./d_usbdev.ko file=/dev/nbd1 HostStr=EV3 SerialStr=0016535543af

brick/kernel/d_usbdev.c

@@ -543,12 +543,27 @@ static int Device1Mmap(struct file *filp, struct vm_area_struct *vma)
 
    return (ret);
 }
+
+#define FEED_DATA _IOC(_IOC_WRITE, 't', 108, 1024)
+
+static int Device1Ioctl(struct inode *pNode, struct file *File, unsigned int Request, unsigned long Pointer)
+{
+  if (Request != FEED_DATA)
+    return -EINVAL;
+
+  copy_from_user(usb_char_buffer_out,(void*)Pointer,1024);
+  usb_char_out_length = 1024;
+
+  return 0;
+}
+
 static    const struct file_operations Device1Entries =
 {
   .owner        = THIS_MODULE,
   .read         = Device1Read,
   .write        = Device1Write,
-  .mmap         = Device1Mmap
+  .mmap         = Device1Mmap,
+  .ioctl        = Device1Ioctl
 };
 
 

brick/kernel/f_mass_storage.c

@@ -2410,7 +2410,28 @@ static void fsg_disable(struct usb_function *f)
 	fsg->common->prev_fsg = fsg->common->fsg;
 	fsg->common->fsg = fsg;
 	fsg->common->new_config = 0;
-	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+
+	DBG(common, "fsg_disable filp=%p\n", fsg->common->luns[0].filp);
+	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE_DISABLE);
+}
+
+static void shutdown_server(void) {
+	DBG(fsg_common, "shutdown_server filp=%p\n", fsg_common->luns[0].filp);
+	if (fsg_common->luns[0].filp) {
+		uint32_t buf[512 / 4];
+		loff_t file_offset_tmp = 512 * 50000; // make sure we're outside of FS area
+		int i;
+
+		// this should shut down the nbd server, so that the caches are flushed
+		memset(buf, 0, sizeof(buf));
+		buf[0] = 0x20da6d81;
+		buf[1] = 0x747e09d4;
+
+		fsg_common->luns[0].filp->f_flags |= O_SYNC;
+		for (i = 0; i < 2; ++i)
+			vfs_write(fsg_common->luns[0].filp,
+							(char*)buf, 512, &file_offset_tmp);
+	}
 }
 
 
@@ -2532,6 +2553,9 @@ static void handle_exception(struct fsg_common *common)
 		/*		SS_RESET_OCCURRED;  */
 		break;
 
+	case FSG_STATE_CONFIG_CHANGE_DISABLE:
+		shutdown_server();
+		// fall-through
 	case FSG_STATE_CONFIG_CHANGE:
 		rc = do_set_config(common, new_config);
 		if (common->ep0_req_tag != exception_req_tag)

brick/kernel/storage_common.c

@@ -334,6 +334,7 @@ enum fsg_state {
 	FSG_STATE_ABORT_BULK_OUT,
 	FSG_STATE_RESET,
 	FSG_STATE_INTERFACE_CHANGE,
+	FSG_STATE_CONFIG_CHANGE_DISABLE,
 	FSG_STATE_CONFIG_CHANGE,
 	FSG_STATE_DISCONNECT,
 	FSG_STATE_EXIT,

brick/scripts/README.md

@@ -0,0 +1,14 @@
+# Patched EV3 image
+
+The file `ev3-fs.patch` summarizes the changes done to the original V1.09D image.
+You can see some text files are edited, the `d_usbdev.ko` is updated (sources in `../kernel`),
+`uf2d` added (sources in `../uf2daemon`), and a stock `nbd.ko` module is added.
+
+Additionally, the `edimax01.ko` is replaced by now much more popular `rtl8192cu.ko` (also stock).
+
+The init script has a hook for running a shell script from `/mnt/ramdisk/`. This can be used
+for testing different modules etc.
+
+The kernel command line has been modified to:
+* disable DMA for the MUSB driver - otherwise the mass storage device is very unstable
+* increase the size of dmesg buffer to 128k

brick/scripts/ev3-fs.patch

@@ -0,0 +1,53 @@
+diff -ur orig-ev3/etc/init.d/ev3init.sh dev-ev3/etc/init.d/ev3init.sh
+--- orig-ev3/etc/init.d/ev3init.sh	1970-01-01 01:00:00.000000000 +0100
++++ dev-ev3/etc/init.d/ev3init.sh	2017-07-27 12:19:43.195041798 +0100
+@@ -1,5 +1,7 @@
+ #!/bin/sh
+ 
++echo Y > /sys/module/printk/parameters/time
++
+ bluetoothd -n > /dev/null 2>&1 &
+ 
+ echo "Setting up VirtualDrive...";
+@@ -60,3 +62,6 @@
+ sleep 2
+ hciattach /dev/ttyS2 texas 2000000 "flow" "nosleep" $STRING
+ sdptool add SP
++
++insmod /lib/modules/2.6.33-rc4/kernel/drivers/net/wireless/rtl8192cu.ko
++. /mnt/ramdisk/rc.local || :
+Only in orig-ev3/home/root/lms2012/sys: exit~
+diff -ur orig-ev3/home/root/lms2012/sys/init dev-ev3/home/root/lms2012/sys/init
+--- orig-ev3/home/root/lms2012/sys/init	1970-01-01 01:00:00.000000000 +0100
++++ dev-ev3/home/root/lms2012/sys/init	2017-07-27 12:23:43.072605126 +0100
+@@ -5,13 +5,15 @@
+ var=$(printf 'HostStr=%s SerialStr=%s' $(cat /home/root/lms2012/sys/settings/BrickName) $(cat /home/root/lms2012/sys/settings/BTser))
+ echo $var > /home/root/lms2012/sys/settings/UsbInfo.dat
+ 
++insmod ${PWD}/mod/nbd.ko
++${PWD}/uf2d
+ insmod ${PWD}/mod/d_iic.ko `cat /home/root/lms2012/sys/settings/HwId`
+ insmod ${PWD}/mod/d_uart.ko `cat /home/root/lms2012/sys/settings/HwId`
+ insmod ${PWD}/mod/d_power.ko `cat /home/root/lms2012/sys/settings/HwId`
+ insmod ${PWD}/mod/d_pwm.ko `cat /home/root/lms2012/sys/settings/HwId`
+ insmod ${PWD}/mod/d_ui.ko `cat /home/root/lms2012/sys/settings/HwId`
+ insmod ${PWD}/mod/d_analog.ko `cat /home/root/lms2012/sys/settings/HwId`
+-insmod ${PWD}/mod/d_usbdev.ko `cat /home/root/lms2012/sys/settings/UsbInfo.dat`
++insmod ${PWD}/mod/d_usbdev.ko `cat /home/root/lms2012/sys/settings/UsbInfo.dat` file=/dev/nbd0
+ insmod ${PWD}/mod/d_usbhost.ko
+ insmod ${PWD}/mod/d_sound.ko `cat /home/root/lms2012/sys/settings/HwId`
+ insmod ${PWD}/mod/d_bt.ko `cat /home/root/lms2012/sys/settings/HwId`
+@@ -29,6 +31,8 @@
+ chmod 666 /dev/lms_iic
+ chmod 666 /dev/lms_bt
+ 
++echo 4 > /proc/sys/kernel/printk
++ 
+ cd ..
+ ls -R > /dev/null
+ cd sys
+Binary files orig-ev3/home/root/lms2012/sys/mod/d_usbdev.ko and dev-ev3/home/root/lms2012/sys/mod/d_usbdev.ko differ
+Only in dev-ev3/home/root/lms2012/sys/mod: nbd.ko
+Only in dev-ev3/home/root/lms2012/sys: uf2d
+Only in orig-ev3/lib/modules/2.6.33-rc4/kernel/drivers/net/wireless: edimax01.ko
+Only in dev-ev3/lib/modules/2.6.33-rc4/kernel/drivers/net/wireless: rtl8192cu.ko

brick/scripts/img.js

@@ -1,14 +1,36 @@
 #!/bin/sh
 
 let fs = require("fs")
+// we try to use shorter versions of all parameters for the additional parameters to fit
+let bootargs = "mem=${memsize} initrd=${filesysaddr},${filesyssize} root=/dev/ram0 rw rootfstype=cramfs console=${console} ip=${ipaddr} lpj=747520 quiet"
+let bootnews = "mem=64M initrd=0xC1180000,10M root=1:0 rw rootfstype=cramfs console=${console} lpj=747520 musb_hdrc.use_dma=0 log_buf_len=128k quiet"
+let piggy = true
 
 function build() {
-  let cr = fs.readFileSync("cram.bin")
-  if (cr.length > 10878976) {
-    console.log("too big")
+  if (bootnews.length > bootargs.length) {
+    console.log("args too long")
     return
   }
-  let img = fs.readFileSync("boot.bin")
+
+  while (bootnews.length < bootargs.length)
+    bootnews += " "
+
+  let cr = fs.readFileSync("cram.bin")
+
+  if (cr.length > 10485760) {
+    console.log("too big by " + (cr.length - 10485760))
+    return
+  }
+  let img = fs.readFileSync("EV3 Firmware V1.09D.bin")
+
+  for (let i = 0; i < bootnews.length; ++i) {
+    if (img[0x21DDA + i] != bootargs.charCodeAt(i)) {
+      console.log("boot args mismatch")
+      return 
+    }
+    img[0x21DDA + i] = bootnews.charCodeAt(i)
+  }
+  
   let off = 0x250000
   if (img[off] != 0x45 || img[off + 1] != 0x3d) {
     console.log("bad magic: " + img[off] + " / " + img[off+1])
@@ -17,8 +39,8 @@ function build() {
 
   cr.copy(img, off)
 
-  let kern = fs.readFileSync("piggy-patched.gzip")
-  off = 0x0005540f
+  let kern = fs.readFileSync(piggy ? "piggy-patched.gzip" : "linux/arch/arm/boot/uImage")
+  off = piggy ? 0x0005540f : 0x00050000
 
   if (img[off] != kern[0] || img[off+1] != kern[1]) {
     console.log("bad kernel magic: " + img[off] + " / " + img[off+1])

brick/scripts/mkimg

@@ -1,4 +1,9 @@
 #!/bin/sh
+# dd if=EV3\ Firmware\ V1.09D.bin of=orig.cram bs=65536 skip=37 count=400
+
+sudo cp linux/pxt/uf2daemon/server dev-ev3/home/root/lms2012/sys/uf2d
+sudo cp linux/pxt/kernel/d_usbdev.ko dev-ev3/home/root/lms2012/sys/mod/d_usbdev.ko
+sudo chown -R root:root dev-ev3/home/root/lms2012
 sudo mkfs.cramfs dev-ev3 cram.bin
 node img
 ls -l firmware.bin

brick/uf2daemon/fat.c

@@ -19,6 +19,9 @@
 #include <time.h>
 #include <signal.h>
 #include <sys/wait.h>
+#include <sys/ioctl.h>
+#include <string.h>
+#include <errno.h>
 
 #define max(a, b)                                                                                  \
     ({                                                                                             \
@@ -627,6 +630,48 @@ void read_block(uint32_t block_no, uint8_t *data) {
     }
 }
 
+char rbfPath[300];
+
+uint8_t stopApp[] = {
+    0x05, 0x00, // size
+    0x00, 0x00, // seq. no.
+    0x3f, 0x3d, // usb magic,
+    0x02,       // req. no.
+};
+
+uint8_t runStart[] = {0x00, 0x00,       // size
+                      0x00, 0x00,       // seq. no.
+                      0x00, 0x00, 0x08, // something
+                      0xC0, 0x08, 0x82, 0x01, 0x00, 0x84};
+
+uint8_t runEnd[] = {0x00, 0x60, 0x64, 0x03, 0x01, 0x60, 0x64, 0x00};
+
+#define FEED_DATA _IOC(_IOC_WRITE, 't', 108, 1024)
+
+void startRbf() {
+    char buf[1024];
+    memset(buf, 0, sizeof(buf));
+    memcpy(buf, stopApp, sizeof(stopApp));
+
+    int fd = open("/dev/lms_usbdev", O_RDWR);
+    ioctl(fd, FEED_DATA, buf);
+    usleep(500000);
+
+    int off = 0;
+    memcpy(buf + off, runStart, sizeof(runStart));
+    off += sizeof(runStart);
+    strcpy(buf + off, rbfPath);
+    off += strlen(rbfPath);
+    memcpy(buf + off, runEnd, sizeof(runEnd));
+    off += sizeof(runEnd);
+    off -= 2;
+    buf[0] = off & 0xff;
+    buf[1] = off >> 8;
+    ioctl(fd, FEED_DATA, buf);
+
+    close(fd);
+}
+
 #define MAX_BLOCKS 8000
 typedef struct {
     uint32_t numBlocks;
@@ -634,81 +679,30 @@ typedef struct {
     uint8_t writtenMask[MAX_BLOCKS / 8 + 1];
 } WriteState;
 
-char elfPath[300];
-
-int lmsPid;
-void stopLMS() {
-    struct dirent *ent;
-    DIR *dir;
-
-    dir = opendir("/proc");
-    if (dir == NULL)
-        return;
-
-    while ((ent = readdir(dir)) != NULL) {
-        int pid = atoi(ent->d_name);
-        if (!pid)
-            continue;
-        char namebuf[100];
-        snprintf(namebuf, 1000, "/proc/%d/cmdline", pid);
-        FILE *f = fopen(namebuf, "r");
-        if (f) {
-            fread(namebuf, 1, 99, f);
-            if (strcmp(namebuf, "./lms2012") == 0) {
-                lmsPid = pid;
-            }
-            fclose(f);
-            if (lmsPid)
-                break;
-        }
-    }
-
-    closedir(dir);
-
-    if (lmsPid) {
-        DBG("SIGSTOP to lmsPID=%d", lmsPid);
-        kill(lmsPid, SIGSTOP);
-    } else {
-        DBG("LMS not found");
-    }
-}
-
-void waitAndContinue() {
-    stopLMS();
-    for (int fd = 3; fd < 9999; ++fd)
-        close(fd);
-    pid_t child = fork();
-    if (child == 0) {
-        DBG("start %s", elfPath);
-        execl(elfPath, elfPath, "--msd", (char *)NULL);
-        exit(128);
-    }
-    int status;
-    waitpid(child, &status, 0);
-    DBG("re-start LMS");
-    if (lmsPid) {
-        kill(lmsPid, SIGCONT);
-    }
-    exit(0);
-}
-
 void restartProgram() {
-    if (!elfPath[0])
+    if (!rbfPath[0])
         exit(0);
-
-    pid_t child = fork();
-    if (child == 0)
-        waitAndContinue();
-    else
-        exit(0); // causes parent to eject MSD etc
+    startRbf();
+    exit(0); // causes parent to eject MSD etc
 }
 
+int numWrites = 0;
 static WriteState wrState;
 void write_block(uint32_t block_no, uint8_t *data) {
     WriteState *state = &wrState;
 
     UF2_Block *bl = (void *)data;
 
+    if (bl->magicStart0 == 0x20da6d81 && bl->magicStart1 == 0x747e09d4) {
+        DBG("restart req, #wr=%d", numWrites);
+        if (numWrites) {
+            exit(0);
+        }
+        return;
+    }
+
+    numWrites++;
+
     if (!is_uf2_block(bl)) {
         return;
     }
@@ -747,6 +741,10 @@ void write_block(uint32_t block_no, uint8_t *data) {
         *p = '/';
 
         int fd = open(fn, O_WRONLY | O_CREAT, 0777);
+        if (fd < 0 && errno == ETXTBSY) {
+            unlink(fn);
+            fd = open(fn, O_WRONLY | O_CREAT, 0777);
+        }
         if (fd >= 0) {
             ftruncate(fd, bl->fileSize);
             lseek(fd, bl->targetAddr, SEEK_SET);
@@ -754,8 +752,8 @@ void write_block(uint32_t block_no, uint8_t *data) {
             write(fd, bl->data, bl->payloadSize);
             close(fd);
 
-            if (strlen(fn) > 4 && !strcmp(fn + strlen(fn) - 4, ".elf")) {
-                strcpy(elfPath, fn);
+            if (strlen(fn) > 4 && !strcmp(fn + strlen(fn) - 4, ".rbf")) {
+                strcpy(rbfPath, fn);
             }
         }
     }

brick/uf2daemon/main.c

@@ -20,6 +20,9 @@
 
 #include "uf2.h"
 
+const char *dev_file = "/dev/nbd0";
+
+
 #define NUM_BLOCKS NUM_FAT_BLOCKS
 
 uint64_t ntohll(uint64_t a) {
@@ -29,23 +32,30 @@ uint64_t ntohll(uint64_t a) {
 
 void mylog(const char *fmt, ...) {
     va_list args;
-    char *p;
+    char *p, *p2;
 
     va_start(args, fmt);
     vasprintf(&p, fmt, args);
     vprintf(fmt, args);
     va_end(args);
 
-    int len = strlen(p) + 1;
-    p[len - 1] = '\n';
+    if (p[0] != '<')
+        asprintf(&p2, "<6>%s\n", p);
+    else
+        asprintf(&p2, "%s\n", p);
+
+    int len = strlen(p2);
 
 #ifdef X86
-    write(2, p, len);
+    write(2, p2, len);
 #else
     int fd = open("/dev/kmsg", O_WRONLY);
-    write(fd, p, len);
+    write(fd, p2, len);
     close(fd);
 #endif
+
+    free(p);
+    free(p2);
 }
 
 void readAll(int fd, void *dst, uint32_t length) {
@@ -89,8 +99,6 @@ void startclient() {
     exit(0);
 }
 
-#define dev_file "/dev/nbd0"
-
 void handleread(int off, int len) {
     uint8_t buf[512];
     LOG("read @%d len=%d", off, len);
@@ -189,11 +197,14 @@ void enableMSD(int enabled) {
 #endif
 }
 
-int main() {
+int main(int argc, char **argv) {
 #ifndef X86
     daemon(0, 1);
 #endif
 
+    if (argc > 1)
+        dev_file = argv[1];
+
     for (;;) {
         pid_t child = fork();
         if (child == 0) {

brick/uf2daemon/uf2.h

@@ -37,7 +37,7 @@ void mylog(const char *fmt, ...);
 
 #define FAIL(args...)                                                                              \
     do {                                                                                           \
-        mylog(args);                                                                                 \
+        mylog("<4>" args);                                                                                 \
         exit(1);                                                                                   \
     } while (0)
 

docfiles/robotsmeta.html

@@ -0,0 +1 @@
+<meta name="robots" content="noindex">

editor/extension.ts

@@ -41,7 +41,8 @@ namespace pxt.editor {
     export function deployCoreAsync(resp: pxtc.CompileResult, isCli = false) {
         let w: Ev3Wrapper
 
-        let filename = resp.downloadFileBaseName
+        let filename = resp.downloadFileBaseName || "pxt"
+        filename = filename.replace(/^lego-/, "")
 
         let fspath = "../prjs/BrkProg_SAVE/"
 

libs/base/_locales/base-jsdoc-strings.json

@@ -1,4 +1,37 @@
 {
+  "Array": "Add, remove, and replace items in lists.\n\nAdd, remove, and replace items in lists.",
+  "Array.filter": "Returns the elements of an array that meet the condition specified in a callback function.",
+  "Array.filter|param|callbackfn": "A function that accepts up to two arguments. The filter method calls the callbackfn function one time for each element in the array.",
+  "Array.get": "Gets the value at a particular index",
+  "Array.get|param|index": "the zero-based position in the list of the item, eg: 0",
+  "Array.indexOf": "Returns the index of the first occurrence of a value in an array.",
+  "Array.indexOf|param|fromIndex": "The array index at which to begin the search. If fromIndex is omitted, the search starts at index 0.",
+  "Array.indexOf|param|item": "The value to locate in the array.",
+  "Array.insertAt": "Insert the value at a particular index, increases length by 1",
+  "Array.insertAt|param|index": "the zero-based position in the list to insert the value, eg: 0",
+  "Array.length": "Gets or sets the length of the array. This is a number one higher than the highest element defined in an array.",
+  "Array.map": "Calls a defined callback function on each element of an array, and returns an array that contains the results.",
+  "Array.map|param|callbackfn": "A function that accepts up to two arguments. The map method calls the callbackfn function one time for each element in the array.",
+  "Array.pop": "Removes the last element from an array and returns it.",
+  "Array.push": "Appends new elements to an array.",
+  "Array.reduce": "Calls the specified callback function for all the elements in an array. The return value of the callback function is the accumulated result, and is provided as an argument in the next call to the callback function.",
+  "Array.reduce|param|callbackfn": "A function that accepts up to three arguments. The reduce method calls the callbackfn function one time for each element in the array.",
+  "Array.reduce|param|initialValue": "Initial value to start the accumulation. The first call to the callbackfn function provides this value as an argument instead of an array value.",
+  "Array.removeAt": "Removes the object at position index.",
+  "Array.removeElement": "Removes the first occurence of an object. Returns true if removed.",
+  "Array.reverse": "Reverses the elements in an Array. The first array element becomes the last, and the last array element becomes the first.",
+  "Array.set": "Stores the value at a particular index",
+  "Array.set|param|index": "the zero-based position in the list to store the value, eg: 0",
+  "Array.shift": "Removes the first element from an array and returns that element. This method changes the length of the array.",
+  "Array.slice": "Returns a section of an array.",
+  "Array.slice|param|end": "The end of the specified portion of the array. eg: 0",
+  "Array.slice|param|start": "The beginning of the specified portion of the array. eg: 0",
+  "Array.sort": "Sorts the elements of an array in place and returns the array. The sort is not necessarily stable.",
+  "Array.splice": "Removes elements from an array.",
+  "Array.splice|param|deleteCount": "The number of elements to remove. eg: 0",
+  "Array.splice|param|start": "The zero-based location in the array from which to start removing elements. eg: 0",
+  "Array.unshift": "Adds one element to the beginning of an array and returns the new length of the array.",
+  "Math": "More complex operations with numbers.",
   "Math.abs": "Returns the absolute value of a number (the value without regard to whether it is positive or negative).\nFor example, the absolute value of -5 is the same as the absolute value of 5.",
   "Math.abs|param|x": "A numeric expression for which the absolute value is needed.",
   "Math.acos": "Returns the arccosine (in radians) of a number",
@@ -58,6 +91,7 @@
   "Math.tan|param|x": "An angle in radians",
   "Math.trunc": "Returns the number with the decimal part truncated.",
   "Math.trunc|param|x": "A numeric expression.",
+  "String": "Combine, split, and search text strings.\n\nCombine, split, and search text strings.",
   "String.charAt": "Returns the character at the specified index.",
   "String.charAt|param|index": "The zero-based index of the desired character.",
   "String.charCodeAt": "Returns the Unicode value of the character at the specified location.",

libs/base/_locales/base-strings.json

@@ -1,4 +1,14 @@
 {
+  "Array.indexOf|block": "%list| find index of %value",
+  "Array.insertAt|block": "%list| insert at %index| value %value",
+  "Array.length|block": "length of %VALUE",
+  "Array.pop|block": "get and remove last value from %list",
+  "Array.push|block": "%list| add value %value| to end",
+  "Array.removeAt|block": "%list| remove value at %index",
+  "Array.reverse|block": "reverse %list",
+  "Array.shift|block": "get and remove first value from %list",
+  "Array.unshift|block": "%list| insert %value| at beginning",
+  "Array|block": "Array",
   "Math.constrain|block": "constrain %value|between %low|and %high",
   "Math.map|block": "map %value|from low %fromLow|from high %fromHigh|to low %toLow|to high %toHigh",
   "Math.randomRange|block": "pick random %min|to %limit",
@@ -27,6 +37,8 @@
   "serial.writeString|block": "serial|write string %text",
   "serial.writeValue|block": "serial|write value %name|= %value",
   "serial|block": "serial",
+  "{id:category}Array": "Array",
+  "{id:category}Arrays": "Arrays",
   "{id:category}Control": "Control",
   "{id:category}Loops": "Loops",
   "{id:category}Math": "Math",

libs/base/enums.d.ts

@@ -30,7 +30,5 @@
     Object = 4,
     Function = 5,
     }
-declare namespace serial {
-}
 
 // Auto-generated. Do not edit. Really.

libs/base/shims.d.ts

@@ -0,0 +1,158 @@
+// Auto-generated. Do not edit.
+
+
+
+    //% indexerGet=BufferMethods::getByte indexerSet=BufferMethods::setByte
+declare interface Buffer {
+    /**
+     * Write a number in specified format in the buffer.
+     */
+    //% shim=BufferMethods::setNumber
+    setNumber(format: NumberFormat, offset: int32, value: number): void;
+
+    /**
+     * Read a number in specified format from the buffer.
+     */
+    //% shim=BufferMethods::getNumber
+    getNumber(format: NumberFormat, offset: int32): number;
+
+    /** Returns the length of a Buffer object. */
+    //% property shim=BufferMethods::length
+    length: int32;
+
+    /**
+     * Fill (a fragment) of the buffer with given value.
+     */
+    //% offset.defl=0 length.defl=-1 shim=BufferMethods::fill
+    fill(value: int32, offset?: int32, length?: int32): void;
+
+    /**
+     * Return a copy of a fragment of a buffer.
+     */
+    //% offset.defl=0 length.defl=-1 shim=BufferMethods::slice
+    slice(offset?: int32, length?: int32): Buffer;
+
+    /**
+     * Shift buffer left in place, with zero padding.
+     * @param offset number of bytes to shift; use negative value to shift right
+     * @param start start offset in buffer. Default is 0.
+     * @param length number of elements in buffer. If negative, length is set as the buffer length minus
+     * start. eg: -1
+     */
+    //% start.defl=0 length.defl=-1 shim=BufferMethods::shift
+    shift(offset: int32, start?: int32, length?: int32): void;
+
+    /**
+     * Convert a buffer to its hexadecimal representation.
+     */
+    //% shim=BufferMethods::toHex
+    toHex(): string;
+
+    /**
+     * Rotate buffer left in place.
+     * @param offset number of bytes to shift; use negative value to shift right
+     * @param start start offset in buffer. Default is 0.
+     * @param length number of elements in buffer. If negative, length is set as the buffer length minus
+     * start. eg: -1
+     */
+    //% start.defl=0 length.defl=-1 shim=BufferMethods::rotate
+    rotate(offset: int32, start?: int32, length?: int32): void;
+
+    /**
+     * Write contents of `src` at `dstOffset` in current buffer.
+     */
+    //% shim=BufferMethods::write
+    write(dstOffset: int32, src: Buffer): void;
+}
+declare namespace loops {
+
+    /**
+     * Repeats the code forever in the background. On each iteration, allows other codes to run.
+     * @param body code to execute
+     */
+    //% help=loops/forever weight=100 blockGap=8
+    //% blockId=forever block="forever" blockAllowMultiple=1 shim=loops::forever
+    function forever(a: () => void): void;
+
+    /**
+     * Pause for the specified time in milliseconds
+     * @param ms how long to pause for, eg: 100, 200, 500, 1000, 2000
+     */
+    //% help=loops/pause weight=99
+    //% async block="pause (ms) %pause"
+    //% blockId=device_pause shim=loops::pause
+    function pause(ms: int32): void;
+}
+declare namespace control {
+
+    /**
+     * Gets the number of milliseconds elapsed since power on.
+     */
+    //% help=control/millis weight=50
+    //% blockId=control_running_time block="millis (ms)" shim=control::millis
+    function millis(): int32;
+
+    /**
+     * Run code when a registered event happens.
+     * @param id the event compoent id
+     * @param value the event value to match
+     */
+    //% weight=20 blockGap=8 blockId="control_on_event" block="on event|from %src|with value %value"
+    //% blockExternalInputs=1
+    //% help="control/on-event" shim=control::onEvent
+    function onEvent(src: int32, value: int32, handler: () => void): void;
+
+    /**
+     * Reset the device.
+     */
+    //% weight=30 async help=control/reset blockGap=8
+    //% blockId="control_reset" block="reset" shim=control::reset
+    function reset(): void;
+
+    /**
+     * Block the current fiber for the given microseconds
+     * @param micros number of micro-seconds to wait. eg: 4
+     */
+    //% help=control/wait-micros weight=29 async
+    //% blockId="control_wait_us" block="wait (µs)%micros" shim=control::waitMicros
+    function waitMicros(micros: int32): void;
+
+    /**
+     * Run other code in the background.
+     */
+    //% help=control/run-in-background blockAllowMultiple=1
+    //% blockId="control_run_in_background" block="run in background" blockGap=8 shim=control::runInBackground
+    function runInBackground(a: () => void): void;
+
+    /**
+     * Blocks the calling thread until the specified event is raised.
+     */
+    //% help=control/wait-for-event async
+    //% blockId=control_wait_for_event block="wait for event|from %src|with value %value" shim=control::waitForEvent
+    function waitForEvent(src: int32, value: int32): void;
+
+    /**
+     * Derive a unique, consistent serial number of this device from internal data.
+     */
+    //% blockId="control_device_serial_number" block="device serial number" weight=9 shim=control::deviceSerialNumber
+    function deviceSerialNumber(): int32;
+}
+declare namespace serial {
+
+    /**
+     * Write some text to the serial port.
+     */
+    //% help=serial/write-string
+    //% weight=87
+    //% blockId=serial_writestring block="serial|write string %text" shim=serial::writeString
+    function writeString(text: string): void;
+
+    /**
+     * Send a buffer across the serial connection.
+     */
+    //% help=serial/write-buffer advanced=true weight=6
+    //% blockId=serial_writebuffer block="serial|write buffer %buffer" shim=serial::writeBuffer
+    function writeBuffer(buffer: Buffer): void;
+}
+
+// Auto-generated. Do not edit. Really.

package.json

@@ -1,6 +1,6 @@
 {
   "name": "pxt-ev3",
-  "version": "0.0.0",
+  "version": "0.0.7",
   "description": "LEGO Mindstorms EV3 for Microsoft MakeCode",
   "private": true,
   "keywords": [
@@ -39,8 +39,8 @@
     "semantic-ui-less": "^2.2.4"
   },
   "dependencies": {
-    "pxt-common-packages": "0.8.1",
-    "pxt-core": "1.7.4"
+    "pxt-common-packages": "0.9.2",
+    "pxt-core": "2.0.2"
   },
   "scripts": {
     "test": "node node_modules/pxt-core/built/pxt.js travis"

theme/style.less

@@ -73,10 +73,6 @@ div.blocklyTreeRow {
     box-shadow: inset 0px 0px 0px 3px rgba(0,0,0,0.1);
 }
 
-div.blocklyTreeRoot div div div div div.blocklyTreeRow {
-    padding-top: 0.5rem !important;
-}
-
 /* Remove shadow around blockly blocks */
 .blocklyPathDark, .blocklyPathLight {
     display: none;
@@ -98,11 +94,12 @@ span.blocklyTreeLabel {
 }
 
 /* Editor menu toggle */
-#menubar .ui.menu .item.editor-menuitem {
+#menubar .ui.menu.fixed .item.editor-menuitem .ui.grid {
     background: @blue !important;
 }
-#menubar .ui.menu .item.editor-menuitem .item {
-    color: white !important;
+
+#menubar .ui.menu.fixed .ui.item.editor-menuitem .item:not(.active) {
+    color: white;
 }
 
 /* Search box */
@@ -124,11 +121,6 @@ span.blocklyTreeLabel {
     #filelist {
         background: transparent;
     }
-    div.blocklyTreeRow {
-        padding-bottom: 2rem !important;
-        min-height: @blocklyRowHeightMobile;
-        line-height: @blocklyRowHeightMobile/2;
-    }
     #blocklyTrashIcon {
         margin: 0.2rem;
     }
@@ -136,29 +128,14 @@ span.blocklyTreeLabel {
 
 /* Tablet */
 @media only screen and (min-width: @tabletBreakpoint) and (max-width: @largestTabletScreen) {
-    div.blocklyTreeRow {
-        padding-left: 0.5rem !important;
-        min-height: @blocklyRowHeightTablet;
-        line-height: @blocklyRowHeightTablet/2;
-    }
 }
 
 /* Small Monitor */
 @media only screen and (min-width: @computerBreakpoint) and (max-width: @largestSmallMonitor) {
-    div.blocklyTreeRow {
-        padding-left: 0.5rem !important;
-        min-height: @blocklyRowHeightComputer;
-        line-height: @blocklyRowHeightComputer/2;
-    }
 }
 
 /* Large Monitor */
 @media only screen and (min-width: @largeMonitorBreakpoint) {
-    div.blocklyTreeRow {
-        padding-left: 0.5rem !important;
-        min-height: @blocklyRowHeightWide;
-        line-height: @blocklyRowHeightWide/2;
-    }
 }
 /* Mobile, Tablet AND thin screen */
 @media only screen and (max-width: @largestTabletScreen) and (max-height: @thinEditorBreakpoint) {