80b9c715b2
* gyro tutorials * tutorials * fix gyro simulator * images * updated image * fix svg errors
37 lines
1.2 KiB
Markdown
37 lines
1.2 KiB
Markdown
# Calibrate Gyro
|
|
|
|
## Introduction @fullscreen
|
|
|
|
The gyroscope is a very useful sensor in the EV3 system. It detects the rotation rate
|
|
which can be very useful to correct the trajectory of the robot and do precise turns.
|
|
|
|
However, the sensor can be imprecise and subject to drifting. It is recommend to
|
|
calibrate your sensor at least once after starting your brick. You don't have to
|
|
recalibrate on every run.
|
|
|
|
* [EV3 Driving Base](https://le-www-live-s.legocdn.com/sc/media/lessons/mindstorms-ev3/building-instructions/ev3-rem-driving-base-79bebfc16bd491186ea9c9069842155e.pdf)
|
|
* [EV3 Driving Base with Gyro](https://le-www-live-s.legocdn.com/sc/media/lessons/mindstorms-ev3/building-instructions/ev3-gyro-sensor-driving-base-a521f8ebe355c281c006418395309e15.pdf)
|
|
|
|
|
|
## Step 1 Show ports
|
|
|
|
Add the ``||brick:show ports||`` to see the status of the gyroscope.
|
|
|
|
```blocks
|
|
brick.showPorts()
|
|
```
|
|
|
|
|
|
## Step 2 Calibration
|
|
|
|
Add a ``||sensors:calibrate gyro||`` block to calibrate the gyro. The block
|
|
detects if the sensor is present and does a full reset of the sensor if necessary.
|
|
|
|
```blocks
|
|
brick.showPorts()
|
|
sensors.gyro2.calibrate()
|
|
```
|
|
|
|
## Step 3 Download and run @fullscreen
|
|
|
|
Download this program to your brick and press the ENTER button. |