172 lines
6.2 KiB
Markdown
172 lines
6.2 KiB
Markdown
# Try
|
|
|
|
Get a quick introduction to programming with EV3.
|
|
|
|
|
|
|
|
We are excited to help you get started with @boardname@. In this project we will guide you through connecting your EV3 Brick, creating your first program, controlling a Large Motor, a Touch Sensor and a Color Sensor. These steps can take up to 45 minutes.
|
|
|
|
## Turn on your EV3 Brick
|
|
|
|
Power on your EV3 Brick by pressing the Center Button.
|
|
|
|
|
|
|
|
## Connect Your EV3 Brick to Your Device
|
|
|
|
Use the USB cable to connect your EV3 Brick to your device.
|
|
|
|
|
|
|
|
## Create and Run your First Program
|
|
|
|
**Code it:** Create the program shown here.
|
|
|
|
```blocks
|
|
brick.buttonEnter.onEvent(ButtonEvent.Pressed, function () {
|
|
brick.showMood(moods.neutral)
|
|
music.playSoundEffect(sounds.communicationHello)
|
|
})
|
|
```
|
|
|
|
* Drag out a ``||brick:on button||`` block from Buttons section in the ``||brick:Brick||`` Toolbox drawer.
|
|
* Drag a Brick Screen ``||brick:show mood||`` block inside the ``||brick:on button||`` block.
|
|
* Change mood to ``neutral``.
|
|
|
|
```block
|
|
brick.showMood(moods.neutral)
|
|
```
|
|
|
|
* Drag a Music ``||music:play sound effect||`` block below the ``||brick:show mood||`` block.
|
|
* Change sound effect to ``communication hello``.
|
|
|
|
```block
|
|
music.playSoundEffect(sounds.communicationHello)
|
|
```
|
|
|
|
**Download:** Click **Download** and follow the instructions to get your code onto your EV3 Brick. Press the center button on the EV3 Brick to run the program.
|
|
|
|
## Did It Work?
|
|
|
|
|
|
|
|
Verify that the program you just created shows eyes on the Brick Display, and that the EV3 Brick played the sound “Hello!”
|
|
|
|
**Well done!**
|
|
|
|
## Run it Again
|
|
|
|
|
|
|
|
Use the Brick Buttons and navigate to the File Manager tab. Open the **BrkProg_SAVE** folder, select **Try** and click the center button to run it again.
|
|
|
|
## Connect a Large Motor
|
|
|
|
Now you will learn to control the Large Motor.
|
|
|
|
|
|
|
|
Connect a Large Motor to **Port D** of your EV3 Brick using any of the connector cables.
|
|
|
|
## Create and Run This Program
|
|
|
|
**Code it:** Create the program shown here.
|
|
|
|
```blocks
|
|
brick.buttonEnter.onEvent(ButtonEvent.Pressed, function () {
|
|
motors.largeD.run(50, 1, MoveUnit.Rotations)
|
|
})
|
|
```
|
|
|
|
* Start a new program.
|
|
* Drag a ``||motors:run large A motor||`` block inside the ``||brick:on button||`` block.
|
|
* Change ``large motor A`` to ``large motor D``.
|
|
* Click on the **(+)** sign.
|
|
* Change to ``1`` rotation.
|
|
|
|
**Download:** Click **Download** and follow the instructions to get your code onto your EV3 Brick. Press the center button on the EV3 Brick to run the program.
|
|
|
|
## Did It Rotate?
|
|
|
|
Confirm that your motor has turned one rotation at power level 50 before stopping.
|
|
|
|
|
|
|
|
Download and run the program as many times as you want in order to verify this, or tinker with different power levels and different rotations.
|
|
|
|
## Connect a Touch Sensor
|
|
|
|
We will now control the Large Motor using a Touch Sensor.
|
|
|
|
|
|
|
|
Keeping the Large Motor connected to **Port D**, connect a Touch Sensor to **Port 1** of your EV3 Brick.
|
|
|
|
## Modify Your Program
|
|
|
|
**Code it:** Add code to the program for the Touch Sensor.
|
|
|
|
```blocks
|
|
brick.buttonEnter.onEvent(ButtonEvent.Pressed, function () {
|
|
sensors.touch1.pauseUntil(ButtonEvent.Pressed)
|
|
motors.largeD.run(50, 1, MoveUnit.Rotations)
|
|
})
|
|
```
|
|
|
|
* Add a ``||sensors:pause until touch 1 pressed||`` Sensor block on top of the ``||motors:run large motor D||`` block.
|
|
|
|
```block
|
|
sensors.touch1.pauseUntil(ButtonEvent.Pressed)
|
|
```
|
|
|
|
**Download:** Click **Download** and follow the instructions to get your code onto your EV3 Brick. Press the center button on the EV3 Brick to run the program.
|
|
|
|
## Press the Touch Sensor
|
|
|
|
Confirm that the Large Motor has turned one rotation AFTER you press the Touch Sensor.
|
|
|
|
|
|
|
|
Download and run the program as many times as you want in order to verify this, or tinker with different Touch Sensor and Large Motor values.
|
|
|
|
## Connect a Color Sensor
|
|
|
|
Now we will try to control the Large Motor using another sensor.
|
|
|
|
|
|
|
|
Keeping the Large Motor connected to **Port D**, connect the Color Sensor to **Port 4**.
|
|
|
|
**Code it:** Modify Your Program to use the Color Sensor.
|
|
|
|
```blocks
|
|
brick.buttonEnter.onEvent(ButtonEvent.Pressed, function () {
|
|
sensors.color4.pauseUntilColorDetected(ColorSensorColor.Green)
|
|
motors.largeD.run(50, 1, MoveUnit.Rotations)
|
|
})
|
|
```
|
|
|
|
* Using the same program, replace the ``||sensors:pause until touch 1||`` block with a ``||sensors:pause color sensor 4||`` for color block.
|
|
|
|
```block
|
|
sensors.color4.pauseUntilColorDetected(ColorSensorColor.Green)
|
|
```
|
|
|
|
* Select the color you want to detect (e.g., green).
|
|
|
|
**Download:** Click **Download** and follow the instructions to get your code onto your EV3 Brick. Press the center button on the EV3 Brick to run the program.
|
|
|
|
## Place a Colored Brick in Front of the Color Sensor
|
|
|
|
|
|
|
|
Confirm that the Large Motor has turned one rotation AFTER the Color Sensor has detected the colored brick.
|
|
|
|
Download and run the program as many times as you want in order to verify this, or tinker with different Color Sensor and Large Motor values.
|
|
|
|
Click on the **JavaScript** tab and change the color the Color Sensor detects to Black, Blue, Green, Yellow, Red, White, or Brown. Use Title Case for the color names.
|
|
|
|
## Well Done!
|
|
|
|
You have now learned how to control some of the inputs and outputs of the EV3.
|