110 lines
4.0 KiB
Markdown
110 lines
4.0 KiB
Markdown
# Use
|
||
|
||
Build a robot and drive into the world of robotics!
|
||
|
||
|
||
|
||
In this project we will guide you through building a Driving Base Robot and programming it to move straight and turn. You will also build and Object Detector Module, and program it to detect an object. It’s a good idea to have done the [Try](/getting-started/try) sequence first.
|
||
|
||
## Connect
|
||
|
||
What if your school had a multipurpose robot? How would you use it?
|
||
|
||
|
||
|
||
Would you use it to clean the school or plant trees?
|
||
|
||
## Build Your Driving Base Robot
|
||
|
||
Build the robot driving base:
|
||
|
||
[](https://le-www-live-s.legocdn.com/sc/media/lessons/mindstorms-ev3/building-instructions/ev3-rem-driving-base-79bebfc16bd491186ea9c9069842155e.pdf)
|
||
|
||
## Make It Move
|
||
|
||
**Code it:** Create a program that makes the Driving Base move forward and stop at the finish line, which is ``1`` meter away.
|
||
|
||
Start by building this program:
|
||
|
||
```blocks
|
||
brick.buttonEnter.onEvent(ButtonEvent.Pressed, function () {
|
||
motors.largeBC.steer(0, 50, 1, MoveUnit.Rotations)
|
||
})
|
||
```
|
||
|
||
* Drag a ``||motors:steer large motors B+C||`` block inside an ``||brick:on button||`` block.
|
||
* Click on the **(+)** sign.
|
||
* Change to ``1`` rotation.
|
||
|
||
### ~hint
|
||
|
||
**Hint:** You will have to modify the number of rotations until you find the number that matches the robot moving forward 1 meter and stopping.
|
||
|
||
### ~
|
||
|
||
**Download:** Click **Download** and follow the instructions to get your code onto your EV3 Brick. Press the center button on the EV3 Brick to run the program.
|
||
|
||
## Make It Turn
|
||
|
||
**Code it:** Create a new program that turns the Driving Base 180 degrees.
|
||
|
||
```blocks
|
||
brick.buttonEnter.onEvent(ButtonEvent.Pressed, function () {
|
||
motors.largeBC.steer(-50, 50, 1, MoveUnit.Rotations)
|
||
})
|
||
```
|
||
|
||
### ~hint
|
||
|
||
**Hint:** You will have to modify the turn ratio and the number of rotations until the robot reaches 180 degrees.
|
||
|
||
### ~
|
||
|
||
**Download:** Click **Download** and follow the instructions to get your code onto your EV3 Brick. Press the center button on the EV3 Brick to run the program.
|
||
|
||
## Add an Ultrasonic Sensor to Your Driving Base
|
||
|
||
Build and attach an Ultrasonic Sensor to your driving base:
|
||
|
||
[](https://le-www-live-s.legocdn.com/sc/media/lessons/mindstorms-ev3/building-instructions/ev3-ultrasonic-sensor-driving-base-61ffdfa461aee2470b8ddbeab16e2070.pdf)
|
||
|
||
## Detect an Object
|
||
|
||
**Code it:** Create a program that moves the Driving Base and makes it stop ``6`` cm from the Cuboid.
|
||
|
||
Create a new program:
|
||
|
||
```blocks
|
||
brick.buttonEnter.onEvent(ButtonEvent.Pressed, function () {
|
||
motors.largeBC.tank(50, 50)
|
||
sensors.ultrasonic4.setThreshold(UltrasonicSensorEvent.ObjectDetected, 6)
|
||
sensors.ultrasonic4.pauseUntil(UltrasonicSensorEvent.ObjectDetected);
|
||
motors.stopAll()
|
||
})
|
||
```
|
||
|
||
* Drag a ``||motors:tank large motors B+C||`` motor block inside the ``||brick:on button||`` block.
|
||
* Drag the Ultrasonic Sensor threshold ``||sensors:set ultrasonic 4||`` block and place it below the motor block.
|
||
* Drag a ``|sensors:pause until ultrasonic 4||`` block and place it under the threshold block.
|
||
* Drag a ``||motors:stop all motors||`` block and place it below the sensor block.
|
||
|
||
### ~hint
|
||
|
||
**Hint:** You will have to modify the values of the Ultrasonic Sensor block until the robot reaches the desired position.
|
||
|
||
### ~
|
||
|
||
**Download:** Click **Download** and follow the instructions to get your code onto your EV3 Brick. Press the center button on the EV3 Brick to run the program.
|
||
|
||
Click on the **JavaScript** tab. Change and test the number value of the Ultrasonic
|
||
Sensor.
|
||
|
||
```typescript
|
||
sensors.ultrasonic4.setThreshold(UltrasonicSensorEvent.ObjectDetected, 10)
|
||
```
|
||
|
||
**Congratulations!**
|
||
|
||
You are ready to move on to the next steps.
|
||
Try a [Design Engineering](/design-engineering), [Coding](/coding), or [Maker](/maker) activity.
|