0.8.6

(cherry picked from commit 62848ed)

docs/index-ref.json

@@ -1,3 +1,3 @@
 {
-    "appref": "v0.7.11"
+    "appref": "v0.8.2"
 }

docs/reference/serial.md

@@ -7,8 +7,11 @@ serial.writeLine("");
 serial.writeNumber(0);
 serial.writeValue("x", 0);
 serial.writeString("");
+serial.readUntil(",");
 serial.readLine();
+serial.readString();
 serial.redirect(SerialPin.P0, SerialPin.P0, BaudRate.BaudRate115200);
+serial.onDataReceived(",", () => {})
 ```
 
 ### See Also

docs/reference/serial/on-data-received.md

@@ -0,0 +1,29 @@
+# Serial On Data Received
+
+Registers an event to be fired when one of the delimiter is matched.
+
+
+```sig
+serial.onDataReceived(",", () => {})
+```
+
+### Parameters
+
+* `delimiters` is a [string](/reference/types/string) containing any of the character to match
+
+### Example
+
+Read values separated by `,`:
+
+```blocks
+serial.onDataReceived(serial.delimiters(Delimiters.Comma), () => {
+    basic.showString(serial.readUntil(serial.delimiters(Delimiters.Comma)))
+})
+```
+
+### See also
+
+[serial](/device/serial),
+[serial write line](/reference/serial/write-line),
+[serial write value](/reference/serial/write-value)
+

docs/reference/serial/read-string.md

@@ -0,0 +1,27 @@
+# Serial Read String
+
+Read the buffered serial data as a string
+
+```sig
+serial.readString();
+```
+
+### Returns
+
+* a [string](/reference/types/string) containing input from the serial port. Empty if no data available.
+
+### Example
+
+The following program scrolls text on the screen as it arrives from serial.
+
+```blocks
+basic.forever(() => {
+    basic.showString(serial.readString());
+});
+```
+
+### See also
+
+[serial](/device/serial),
+[serial write line](/reference/serial/write-line),
+[serial write value](/reference/serial/write-value)

libs/bluetooth/bluetooth.ts

@@ -1,7 +1,7 @@
 /**
  * Support for additional Bluetooth services.
  */
-//% color=#0082FB weight=20
+//% color=#0082FB weight=20 icon="\uf294"
 namespace bluetooth {
     /**
     *  Writes to the Bluetooth UART service buffer. From there the data is transmitted over Bluetooth to a connected device.

libs/core/_locales/core-jsdoc-strings.json

@@ -238,8 +238,10 @@
   "pins.spiWrite|param|value": "Data to be sent to the SPI slave",
   "serial": "Reading and writing data over a serial connection.",
   "serial.delimiters": "Returns the delimiter corresponding string",
-  "serial.onLineReceived": "Registers an event to be fired when a line has been received",
+  "serial.onDataReceived": "Registers an event to be fired when one of the delimiter is matched.",
+  "serial.onDataReceived|param|delimiters": "the characters to match received characters against.",
   "serial.readLine": "Reads a line of text from the serial port.",
+  "serial.readString": "Reads the buffered received data as a string",
   "serial.readUntil": "Reads a line of text from the serial port and returns the buffer when the delimiter is met.",
   "serial.readUntil|param|delimiter": "text delimiter that separates each text chunk",
   "serial.redirect": "Dynamically configuring the serial instance to use pins other than USBTX and USBRX.",

libs/core/_locales/core-strings.json

@@ -181,7 +181,9 @@
   "pins.spiWrite|block": "spi write %value",
   "pins|block": "pins",
   "serial.delimiters|block": "%del",
+  "serial.onDataReceived|block": "serial|on data received %delimiters=serial_delimiter_conv",
   "serial.readLine|block": "serial|read line",
+  "serial.readString|block": "serial|read string",
   "serial.readUntil|block": "serial|read until %delimiter=serial_delimiter_conv",
   "serial.redirect|block": "serial|redirect to|TX %tx|RX %rx|at baud rate %rate",
   "serial.writeLine|block": "serial|write line %text",

libs/core/basic.cpp

@@ -4,12 +4,12 @@
 /**
  * Provides access to basic micro:bit functionality.
  */
-//% color=#54C9C9 weight=100
+//% color=#54C9C9 weight=100 icon="\uf00a"
 namespace basic {
     /**
     * Sets the color on the build-in LED. Set to 0 to turn off.
     */
-    //% blockId=device_set_led_color block="set led to %color=color_id" icon="\uf00a"
+    //% blockId=device_set_led_color block="set led to %color=color_id"
     //% weight=50
     void setLedColor(int color) {
       if (!color) {
@@ -31,7 +31,7 @@ namespace basic {
      */
     //% help=basic/show-number
     //% weight=96
-    //% blockId=device_show_number block="show|number %number" blockGap=8 icon="\uf1ec"
+    //% blockId=device_show_number block="show|number %number" blockGap=8
     //% async
     //% parts="ledmatrix"
     void showNumber(int value, int interval = 150) { 
@@ -55,7 +55,7 @@ namespace basic {
     //% weight=95 blockGap=8
     //% imageLiteral=1 async
     //% blockId=device_show_leds
-    //% block="show leds" icon="\uf00a"
+    //% block="show leds"
     //% parts="ledmatrix"
     void showLeds(ImageLiteral leds, int interval = 400) {
       uBit.display.print(MicroBitImage(imageBytes(leds)), 0, 0, 0, interval);
@@ -68,7 +68,7 @@ namespace basic {
      */
     //% help=basic/show-string 
     //% weight=87 blockGap=8
-    //% block="show|string %text" icon="\uf031" 
+    //% block="show|string %text" 
     //% async
     //% blockId=device_print_message
     //% parts="ledmatrix"
@@ -91,7 +91,7 @@ namespace basic {
      * Turn off all LEDs
      */
     //% help=basic/clear-screen weight=79
-    //% blockId=device_clear_display block="clear screen" icon="\uf12d"
+    //% blockId=device_clear_display block="clear screen"
     //% parts="ledmatrix"
     void clearScreen() {
       uBit.display.image.clear();
@@ -131,7 +131,7 @@ namespace basic {
      * @param body code to execute
      */
     //% help=basic/forever weight=55 blockGap=8
-    //% blockId=device_forever block="forever" icon="\uf01e"
+    //% blockId=device_forever block="forever"
     void forever(Action a) {
       if (a != 0) {
         incr(a);
@@ -145,7 +145,7 @@ namespace basic {
      */
     //% help=basic/pause weight=54
     //% async block="pause (ms) %pause"
-    //% blockId=device_pause icon="\uf110"
+    //% blockId=device_pause
     void pause(int ms) {
       fiber_sleep(ms);
     }

libs/core/control.cpp

@@ -34,17 +34,18 @@ enum EventBusSource {
     MICROBIT_ID_IO_P5_ = MICROBIT_ID_IO_P5,
     MICROBIT_ID_IO_P6_ = MICROBIT_ID_IO_P6,
     MICROBIT_ID_IO_P7_ = MICROBIT_ID_IO_P7,
-    //MICROBIT_ID_IO_P8_ = MICROBIT_ID_IO_P8,
+    MICROBIT_ID_IO_P8_ = MICROBIT_ID_IO_P8,
     MICROBIT_ID_IO_P9_ = MICROBIT_ID_IO_P9,
     MICROBIT_ID_IO_P10_ = MICROBIT_ID_IO_P10,
     MICROBIT_ID_IO_P11_ = MICROBIT_ID_IO_P11,
-    //MICROBIT_ID_IO_P12_ = MICROBIT_ID_IO_P12,
-    //MICROBIT_ID_IO_P13_ = MICROBIT_ID_IO_P13,
-    //MICROBIT_ID_IO_P14_ = MICROBIT_ID_IO_P14,
-    //MICROBIT_ID_IO_P15_ = MICROBIT_ID_IO_P15,
-    //MICROBIT_ID_IO_P16_ = MICROBIT_ID_IO_P16,
+    MICROBIT_ID_IO_P12_ = MICROBIT_ID_IO_P12,
+    MICROBIT_ID_IO_P13_ = MICROBIT_ID_IO_P13,
+    MICROBIT_ID_IO_P14_ = MICROBIT_ID_IO_P14,
+    MICROBIT_ID_IO_P15_ = MICROBIT_ID_IO_P15,
+    MICROBIT_ID_IO_P16_ = MICROBIT_ID_IO_P16,
     MICROBIT_ID_IO_P19_ = MICROBIT_ID_IO_P19,
     MICROBIT_ID_IO_P20_ = MICROBIT_ID_IO_P20,
+    MICROBIT_ID_IO_P21_ = MICROBIT_ID_IO_P21,
     MES_DEVICE_INFO_ID_ = MES_DEVICE_INFO_ID,
     MES_SIGNAL_STRENGTH_ID_ = MES_SIGNAL_STRENGTH_ID,
     MES_DPAD_CONTROLLER_ID_ = MES_DPAD_CONTROLLER_ID,

libs/core/control.ts

@@ -1,7 +1,7 @@
 /**
 * Runtime and event utilities.
 */
-//% weight=1 color="#42495F"
+//% weight=1 color="#42495F" icon="\uf233"
 //% advanced=true
 namespace control {
 

libs/core/dal.d.ts

@@ -79,12 +79,15 @@ declare const enum DAL {
     MICROBIT_BLE_PAIRING_TIMEOUT = 90,
     MICROBIT_BLE_POWER_LEVELS = 8,
     MICROBIT_BLE_MAXIMUM_BONDS = 4,
-    MICROBIT_BLE_EDDYSTONE_URL_ADV_INTERVAL = 400,
+    MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL = 400,
+    MICROBIT_BLE_EDDYSTONE_DEFAULT_POWER = 0xF0,
+    MICROBIT_BLE_DISCONNECT_AFTER_PAIRING_DELAY = 500,
     // built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitButtonService.h
     // built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitDFUService.h
     MICROBIT_DFU_OPCODE_START_DFU = 1,
     MICROBIT_DFU_HISTOGRAM_WIDTH = 5,
     MICROBIT_DFU_HISTOGRAM_HEIGHT = 5,
+    // built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitEddystone.h
     // built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitEventService.h
     // built/yt/yotta_modules/microbit-dal/inc/bluetooth/MicroBitIOPinService.h
     MICROBIT_IO_PIN_SERVICE_PINCOUNT = 19,
@@ -124,7 +127,6 @@ declare const enum DAL {
     MICROBIT_ID_ACCELEROMETER = 4,
     MICROBIT_ID_COMPASS = 5,
     MICROBIT_ID_DISPLAY = 6,
-    MICROBIT_IO_PINS = 20,
     MICROBIT_ID_IO_P0 = 7,
     MICROBIT_ID_IO_P1 = 8,
     MICROBIT_ID_IO_P2 = 9,
@@ -133,11 +135,18 @@ declare const enum DAL {
     MICROBIT_ID_IO_P5 = 12,
     MICROBIT_ID_IO_P6 = 13,
     MICROBIT_ID_IO_P7 = 14,
+    MICROBIT_ID_IO_P8 = 15,
     MICROBIT_ID_IO_P9 = 16,
     MICROBIT_ID_IO_P10 = 17,
     MICROBIT_ID_IO_P11 = 18,
+    MICROBIT_ID_IO_P12 = 19,
+    MICROBIT_ID_IO_P13 = 20,
+    MICROBIT_ID_IO_P14 = 21,
+    MICROBIT_ID_IO_P15 = 22,
+    MICROBIT_ID_IO_P16 = 23,
     MICROBIT_ID_IO_P19 = 24,
     MICROBIT_ID_IO_P20 = 25,
+    MICROBIT_ID_IO_P21 = 50,
     MICROBIT_ID_BUTTON_AB = 26,
     MICROBIT_ID_GESTURE = 27,
     MICROBIT_ID_THERMOMETER = 28,
@@ -145,17 +154,6 @@ declare const enum DAL {
     MICROBIT_ID_RADIO_DATA_READY = 30,
     MICROBIT_ID_MULTIBUTTON_ATTACH = 31,
     MICROBIT_ID_SERIAL = 32,
-    CALLIOPE_ID_IO_P3 = 33,
-    CALLIOPE_ID_IO_P7 = 34,
-    CALLIOPE_ID_IO_P8 = 35,
-    CALLIOPE_ID_IO_P9 = 36,
-    CALLIOPE_ID_IO_P13 = 37,
-    CALLIOPE_ID_IO_P14 = 38,
-    CALLIOPE_ID_IO_P15 = 39,
-    CALLIOPE_ID_IO_P22 = 40,
-    CALLIOPE_ID_IO_P28 = 41,
-    CALLIOPE_ID_IO_P29 = 42,
-    CALLIOPE_ID_IO_P30 = 43,
     MICROBIT_ID_MESSAGE_BUS_LISTENER = 1021,
     MICROBIT_ID_NOTIFY_ONE = 1022,
     MICROBIT_ID_NOTIFY = 1023,
@@ -513,6 +511,30 @@ declare const enum DAL {
     MICROBIT_DISPLAY_ROTATION_90 = 1,
     MICROBIT_DISPLAY_ROTATION_180 = 2,
     MICROBIT_DISPLAY_ROTATION_270 = 3,
+    // built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitFile.h
+    // built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitFileSystem.h
+    MBFS_FILENAME_LENGTH = 16,
+    MB_READ = 0x01,
+    MB_WRITE = 0x02,
+    MB_CREAT = 0x04,
+    MB_APPEND = 0x08,
+    MB_SEEK_SET = 0x01,
+    MB_SEEK_END = 0x02,
+    MB_SEEK_CUR = 0x04,
+    MBFS_STATUS_INITIALISED = 0x01,
+    MBFS_UNUSED = 0xFFFF,
+    MBFS_EOF = 0xEFFF,
+    MBFS_DELETED = 0x0000,
+    MBFS_DIRECTORY_ENTRY_FREE = 0x8000,
+    MBFS_DIRECTORY_ENTRY_VALID = 0x4000,
+    MBFS_DIRECTORY_ENTRY_DIRECTORY = 0x2000,
+    MBFS_DIRECTORY_ENTRY_NEW = 0xffff,
+    MBFS_DIRECTORY_ENTRY_DELETED = 0x0000,
+    MBFS_BLOCK_TYPE_FILE = 1,
+    MBFS_BLOCK_TYPE_DIRECTORY = 2,
+    MBFS_BLOCK_TYPE_FILETABLE = 3,
+    // built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitFlash.h
+    PAGE_SIZE = 1024,
     // built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitI2C.h
     MICROBIT_I2C_MAX_RETRIES = 9,
     // built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitIO.h
@@ -558,7 +580,6 @@ declare const enum DAL {
     MICROBIT_PIN_EVT_PULSE_LO = 5,
     PIN_CAPABILITY_DIGITAL = 0x01,
     PIN_CAPABILITY_ANALOG = 0x02,
-    PIN_CAPABILITY_TOUCH = 0x04,
     // built/yt/yotta_modules/microbit-dal/inc/drivers/MicroBitRadio.h
     MICROBIT_RADIO_STATUS_INITIALISED = 0x0001,
     MICROBIT_RADIO_BASE_ADDRESS = 0x75626974,

libs/core/enums.d.ts

@@ -34,10 +34,10 @@ declare namespace basic {
 
 
     declare enum TouchPin {
-    P0 = 7,  // MICROBIT_ID_IO_P0
-    P1 = 8,  // MICROBIT_ID_IO_P1
-    P2 = 9,  // MICROBIT_ID_IO_P2
-    P3 = 40,  // CALLIOPE_ID_IO_P22
+    P0 = 19,  // MICROBIT_ID_IO_P12
+    P1 = 7,  // MICROBIT_ID_IO_P0
+    P2 = 8,  // MICROBIT_ID_IO_P1
+    P3 = 23,  // MICROBIT_ID_IO_P16
     }
 
 
@@ -152,17 +152,18 @@ declare namespace input {
     MICROBIT_ID_IO_P5 = 12,  // MICROBIT_ID_IO_P5
     MICROBIT_ID_IO_P6 = 13,  // MICROBIT_ID_IO_P6
     MICROBIT_ID_IO_P7 = 14,  // MICROBIT_ID_IO_P7
-    //MICROBIT_ID_IO_P8_ = MICROBIT_ID_IO_P8,
+    MICROBIT_ID_IO_P8 = 15,  // MICROBIT_ID_IO_P8
     MICROBIT_ID_IO_P9 = 16,  // MICROBIT_ID_IO_P9
     MICROBIT_ID_IO_P10 = 17,  // MICROBIT_ID_IO_P10
     MICROBIT_ID_IO_P11 = 18,  // MICROBIT_ID_IO_P11
-    //MICROBIT_ID_IO_P12_ = MICROBIT_ID_IO_P12,
-    //MICROBIT_ID_IO_P13_ = MICROBIT_ID_IO_P13,
-    //MICROBIT_ID_IO_P14_ = MICROBIT_ID_IO_P14,
-    //MICROBIT_ID_IO_P15_ = MICROBIT_ID_IO_P15,
-    //MICROBIT_ID_IO_P16_ = MICROBIT_ID_IO_P16,
+    MICROBIT_ID_IO_P12 = 19,  // MICROBIT_ID_IO_P12
+    MICROBIT_ID_IO_P13 = 20,  // MICROBIT_ID_IO_P13
+    MICROBIT_ID_IO_P14 = 21,  // MICROBIT_ID_IO_P14
+    MICROBIT_ID_IO_P15 = 22,  // MICROBIT_ID_IO_P15
+    MICROBIT_ID_IO_P16 = 23,  // MICROBIT_ID_IO_P16
     MICROBIT_ID_IO_P19 = 24,  // MICROBIT_ID_IO_P19
     MICROBIT_ID_IO_P20 = 25,  // MICROBIT_ID_IO_P20
+    MICROBIT_ID_IO_P21 = 50,  // MICROBIT_ID_IO_P21
     MES_DEVICE_INFO_ID = 1103,  // MES_DEVICE_INFO_ID
     MES_SIGNAL_STRENGTH_ID = 1101,  // MES_SIGNAL_STRENGTH_ID
     MES_DPAD_CONTROLLER_ID = 1104,  // MES_DPAD_CONTROLLER_ID
@@ -263,36 +264,33 @@ declare namespace motors {
 
 
     declare enum DigitalPin {
-    P0 = 7,  // MICROBIT_ID_IO_P0
-    P1 = 8,  // MICROBIT_ID_IO_P1
-    P2 = 9,  // MICROBIT_ID_IO_P2
-    P3 = 40,  // CALLIOPE_ID_IO_P22
+    P0 = 19,  // MICROBIT_ID_IO_P12
+    P1 = 7,  // MICROBIT_ID_IO_P0
+    P2 = 8,  // MICROBIT_ID_IO_P1
+    P3 = 23,  // MICROBIT_ID_IO_P16
     C4 = 10,  // MICROBIT_ID_IO_P3
     C5 = 11,  // MICROBIT_ID_IO_P4
     C6 = 17,  // MICROBIT_ID_IO_P10
-    C7 = 34,  // CALLIOPE_ID_IO_P7
-    C8 = 35,  // CALLIOPE_ID_IO_P8
-    C9 = 36,  // CALLIOPE_ID_IO_P9
+    C7 = 20,  // MICROBIT_ID_IO_P13
+    C8 = 21,  // MICROBIT_ID_IO_P14
+    C9 = 22,  // MICROBIT_ID_IO_P15
     C10 = 16,  // MICROBIT_ID_IO_P9
     C11 = 14,  // MICROBIT_ID_IO_P7
     C12 = 13,  // MICROBIT_ID_IO_P6
-    C13 = 37,  // CALLIOPE_ID_IO_P13
-    C14 = 38,  // CALLIOPE_ID_IO_P14
-    C15 = 39,  // CALLIOPE_ID_IO_P15
-    //P16 = MICROBIT_ID_IO_P16,
+    C16 = 9,  // MICROBIT_ID_IO_P2
+    C17 = 15,  // MICROBIT_ID_IO_P8
+    C18 = 25,  // MICROBIT_ID_IO_P20
     C19 = 24,  // MICROBIT_ID_IO_P19
-    C20 = 25,  // MICROBIT_ID_IO_P20
     }
 
 
     declare enum AnalogPin {
-    //P0 = MICROBIT_ID_IO_P0, -- does not work analogue
-    P1 = 8,  // MICROBIT_ID_IO_P1
-    P2 = 9,  // MICROBIT_ID_IO_P2
-    //P3 = CALLIOPE_ID_IO_P22, -- does not work analogue
+    P1 = 7,  // MICROBIT_ID_IO_P0
+    P2 = 8,  // MICROBIT_ID_IO_P1
     C4 = 10,  // MICROBIT_ID_IO_P3
     C5 = 11,  // MICROBIT_ID_IO_P4
     C6 = 17,  // MICROBIT_ID_IO_P10
+    MIC = 50,  // MICROBIT_ID_IO_P21
     }
 
 

libs/core/game.ts

@@ -21,7 +21,7 @@ enum LedSpriteProperty {
 /**
  * A single-LED sprite game engine
  */
-//% color=#008272 weight=32
+//% color=#008272 weight=32 icon="\uf11b"
 //% advanced=true
 namespace game {
     let _score: number = 0;

libs/core/images.cpp

@@ -3,7 +3,7 @@
 /**
 * Creation, manipulation and display of LED images.
 */
-//% color=#5C2D91 weight=31
+//% color=#5C2D91 weight=31 icon="\uf03e"
 //% advanced=true
 namespace images {
     /**

libs/core/input.cpp

@@ -26,10 +26,10 @@ enum class Rotation {
 };
 
 enum class TouchPin {
-    P0 = MICROBIT_ID_IO_P0,
-    P1 = MICROBIT_ID_IO_P1,
-    P2 = MICROBIT_ID_IO_P2,
-    P3 = CALLIOPE_ID_IO_P22
+    P0 = MICROBIT_ID_IO_P12,
+    P1 = MICROBIT_ID_IO_P0,
+    P2 = MICROBIT_ID_IO_P1,
+    P3 = MICROBIT_ID_IO_P16
 };
 
 enum class AcceleratorRange {
@@ -108,7 +108,7 @@ enum class Gesture {
     SixG = MICROBIT_ACCELEROMETER_EVT_6G
 };
 
-//% color=#C90072 weight=99
+//% color=#C90072 weight=99 icon="\uf192"
 namespace input {
     /**
      * Do something when a button (``A``, ``B`` or both ``A+B``) is pressed
@@ -116,7 +116,7 @@ namespace input {
      * @param body TODO
      */
     //% help=input/on-button-pressed weight=85 blockGap=8
-    //% blockId=device_button_event block="on button|%NAME|pressed" icon="\uf192"
+    //% blockId=device_button_event block="on button|%NAME|pressed"
     //% parts="buttonpair"
     void onButtonPressed(Button button, Action body) {
         registerWithDal((int)button, MICROBIT_BUTTON_EVT_CLICK, body);
@@ -127,7 +127,7 @@ namespace input {
      * @param body TODO
      */
     //% help=input/on-gesture weight=84 blockGap=8
-    //% blockId=device_gesture_event block="on |%NAME" icon="\uf135"
+    //% blockId=device_gesture_event block="on |%NAME"
     //% parts="accelerometer"
     void onGesture(Gesture gesture, Action body) {
         if ((int)gesture == MICROBIT_ACCELEROMETER_EVT_3G && uBit.accelerometer.getRange() < 3)
@@ -143,7 +143,7 @@ namespace input {
      * @param body the code to run when the pin is pressed
      */
     //% help=input/on-pin-pressed weight=83
-    //% blockId=device_pin_event block="on pin %NAME|pressed" icon="\uf094"
+    //% blockId=device_pin_event block="on pin %NAME|pressed"
     void onPinPressed(TouchPin name, Action body) {
         auto pin = getPin((int)name);
         if (!pin) return;
@@ -159,7 +159,7 @@ namespace input {
      * @param body the code to run when the pin is released
      */
     //% help=input/on-pin-released weight=6 blockGap=8
-    //% blockId=device_pin_released block="on pin %NAME|released" icon="\uf094"
+    //% blockId=device_pin_released block="on pin %NAME|released"
     //% advanced=true
     void onPinReleased(TouchPin name, Action body) {
         auto pin = getPin((int)name);
@@ -176,7 +176,7 @@ namespace input {
     //% help=input/button-is-pressed weight=60
     //% block="button|%NAME|is pressed"
     //% blockId=device_get_button2
-    //% icon="\uf192" blockGap=8
+    //% blockGap=8
     //% parts="buttonpair"
     bool buttonIsPressed(Button button) {
       if (button == Button::A)
@@ -193,7 +193,7 @@ namespace input {
      * @param name pin used to detect the touch
      */
     //% help=input/pin-is-pressed weight=58
-    //% blockId="device_pin_is_pressed" block="pin %NAME|is pressed" icon="\uf094"
+    //% blockId="device_pin_is_pressed" block="pin %NAME|is pressed"
     //% blockGap=8
     bool pinIsPressed(TouchPin name) {
         auto pin = getPin((int)name);
@@ -211,7 +211,7 @@ namespace input {
      * Get the acceleration value in milli-gravitys (when the board is laying flat with the screen up, x=0, y=0 and z=-1024)
      * @param dimension TODO
      */
-    //% help=input/acceleration weight=58 icon="\uf135"
+    //% help=input/acceleration weight=58
     //% blockId=device_acceleration block="acceleration (mg)|%NAME" blockGap=8
     //% parts="accelerometer"
     int acceleration(Dimension dimension) {
@@ -228,7 +228,7 @@ namespace input {
      * Reads the light level applied to the LED screen in a range from ``0`` (dark) to ``255`` bright.
      */
     //% help=input/light-level weight=57
-    //% blockId=device_get_light_level block="light level" blockGap=8 icon="\uf185"
+    //% blockId=device_get_light_level block="light level" blockGap=8
     //% parts="ledmatrix"
     int lightLevel() {
         return uBit.display.readLightLevel();
@@ -238,7 +238,7 @@ namespace input {
      * Get the current compass heading in degrees.
      */
     //% help=input/compass-heading
-    //% weight=56 icon="\uf14e"
+    //% weight=56
     //% blockId=device_heading block="compass heading (°)" blockGap=8
     //% parts="compass"
     int compassHeading() {
@@ -249,7 +249,7 @@ namespace input {
     /**
      * Gets the temperature in Celsius degrees (°C).
      */
-    //% weight=55 icon="\uf06d"
+    //% weight=55
     //% help=input/temperature
     //% blockId=device_temperature block="temperature (°C)" blockGap=8
     //% parts="thermometer"
@@ -262,7 +262,7 @@ namespace input {
      * @param kind TODO
      */
     //% help=input/rotation weight=52
-    //% blockId=device_get_rotation block="rotation (°)|%NAME" blockGap=8 icon="\uf197"
+    //% blockId=device_get_rotation block="rotation (°)|%NAME" blockGap=8
     //% parts="accelerometer" advanced=true
     int rotation(Rotation kind) {
       switch (kind) {
@@ -277,7 +277,7 @@ namespace input {
      * @param dimension TODO
      */
     //% help=input/magnetic-force weight=51
-    //% blockId=device_get_magnetic_force block="magnetic force (µT)|%NAME" blockGap=8 icon="\uf076"
+    //% blockId=device_get_magnetic_force block="magnetic force (µT)|%NAME" blockGap=8
     //% parts="compass"
     //% advanced=true
     int magneticForce(Dimension dimension) {
@@ -297,7 +297,7 @@ namespace input {
      * Gets the number of milliseconds elapsed since power on.
      */
     //% help=input/running-time weight=50
-    //% blockId=device_get_running_time block="running time (ms)" icon="\uf017"
+    //% blockId=device_get_running_time block="running time (ms)"
     //% advanced=true
     int runningTime() {
         return system_timer_current_time();
@@ -314,7 +314,7 @@ namespace input {
      * @param range a value describe the maximum strengh of acceleration measured
      */
     //% help=input/set-accelerometer-range
-    //% blockId=device_set_accelerometer_range block="set accelerometer|range %range" icon="\uf135"
+    //% blockId=device_set_accelerometer_range block="set accelerometer|range %range"
     //% weight=5
     //% parts="accelerometer"
     //% advanced=true

libs/core/led.cpp

@@ -8,7 +8,7 @@ enum class DisplayMode_ {
     // TODO DISPLAY_MODE_BLACK_AND_WHITE_LIGHT_SENSE
 };
 
-//% color=#8169E6 weight=35
+//% color=#8169E6 weight=35 icon="\uf205"
 namespace led {
 
     /**
@@ -17,7 +17,7 @@ namespace led {
      * @param y TODO
      */
     //% help=led/plot weight=78
-    //% blockId=device_plot block="plot|x %x|y %y" icon="\uf205" blockGap=8
+    //% blockId=device_plot block="plot|x %x|y %y" blockGap=8
     //% parts="ledmatrix"
     void plot(int x, int y) {
       uBit.display.image.setPixelValue(x, y, 1);
@@ -29,7 +29,7 @@ namespace led {
      * @param y TODO
      */
     //% help=led/unplot weight=77
-    //% blockId=device_unplot block="unplot|x %x|y %y" icon="\uf204" blockGap=8
+    //% blockId=device_unplot block="unplot|x %x|y %y" blockGap=8
     //% parts="ledmatrix"
     void unplot(int x, int y) {
       uBit.display.image.setPixelValue(x, y, 0);
@@ -41,7 +41,7 @@ namespace led {
      * @param y TODO
      */
     //% help=led/point weight=76
-    //% blockId=device_point block="point|x %x|y %y" icon="\uf10c"
+    //% blockId=device_point block="point|x %x|y %y"
     //% parts="ledmatrix"
     bool point(int x, int y) {
       int pix = uBit.display.image.getPixelValue(x, y);
@@ -52,7 +52,7 @@ namespace led {
      * Get the screen brightness from 0 (off) to 255 (full bright).
      */
     //% help=led/brightness weight=60
-    //% blockId=device_get_brightness block="brightness" icon="\uf042" blockGap=8
+    //% blockId=device_get_brightness block="brightness" blockGap=8
     //% parts="ledmatrix"
     //% advanced=true
     int brightness() {
@@ -64,7 +64,7 @@ namespace led {
      * @param value the brightness value, eg:255, 127, 0
      */
     //% help=led/set-brightness weight=59
-    //% blockId=device_set_brightness block="set brightness %value" icon="\uf042"
+    //% blockId=device_set_brightness block="set brightness %value"
     //% parts="ledmatrix"
     //% advanced=true
     void setBrightness(int value) {
@@ -75,7 +75,7 @@ namespace led {
      * Cancels the current animation and clears other pending animations.
      */
     //% weight=50 help=led/stop-animation
-    //% blockId=device_stop_animation block="stop animation" icon="\uf04d"
+    //% blockId=device_stop_animation block="stop animation"
     //% parts="ledmatrix"
     //% advanced=true
     void stopAnimation() {
@@ -95,7 +95,7 @@ namespace led {
     /**
     * Turns on or off the display    
     */
-    //% help=led/enable blockId=device_led_enable icon="\uf04d"
+    //% help=led/enable blockId=device_led_enable
     //% advanced=true parts="ledmatrix"
     void enable(bool on) {
         if (on) uBit.display.enable();

libs/core/motors.cpp

@@ -19,7 +19,7 @@ enum Motor {
 /**
 * Blocks to control the onboard motors
 */
-//% color=#008272 weight=30
+//% color=#008272 weight=30 icon="\uf1b9"
 namespace motors {
     /**
     * Turns on the motor at a certain percent of power. Switches to single motor mode!

libs/core/music.ts

@@ -125,7 +125,7 @@ enum BeatFraction {
 /**
  * Generation of music tones through pin ``P0``.
  */
-//% color=#DF4600 weight=98
+//% color=#DF4600 weight=98 icon="\uf025"
 namespace music {
     let beatsPerMinute: number = 120;
 
@@ -145,7 +145,7 @@ namespace music {
      * @param frequency pitch of the tone to play in Hertz (Hz)
      */
     //% help=music/ring-tone weight=80
-    //% blockId=device_ring block="ring tone (Hz)|%note=device_note" icon="\uf025" blockGap=8
+    //% blockId=device_ring block="ring tone (Hz)|%note=device_note" blockGap=8
     //% parts="speaker" async
     export function ringTone(frequency: number) {
         playTone(frequency, 0);

libs/core/pins.cpp

@@ -1,35 +1,32 @@
 #include "pxt.h"
 
 enum class DigitalPin {
-    P0 = MICROBIT_ID_IO_P0,   // edge connector 0
-    P1 = MICROBIT_ID_IO_P1,   // edge connector 1
-    P2 = MICROBIT_ID_IO_P2,   // edge connector 2
-    P3 = CALLIOPE_ID_IO_P22,  // edge connector 3
-    C4 = MICROBIT_ID_IO_P3,   // LED matrix C1
-    C5 = MICROBIT_ID_IO_P4,   // LED matrix C2
-    C6 = MICROBIT_ID_IO_P10,  // LED matrix C3
-    C7 = CALLIOPE_ID_IO_P7,   // LED matrix C4
-    C8 = CALLIOPE_ID_IO_P8,   // LED matrix C5
-    C9 = CALLIOPE_ID_IO_P9,   // LED matrix C6
-    C10 = MICROBIT_ID_IO_P9,  // LED matrix C7
-    C11 = MICROBIT_ID_IO_P7,  // LED matrix C8
-    C12 = MICROBIT_ID_IO_P6,  // LED matrix C9
-    C13 = CALLIOPE_ID_IO_P13, // LED matrix R1
-    C14 = CALLIOPE_ID_IO_P14, // LED matrix R2
-    C15 = CALLIOPE_ID_IO_P15, // LED matrix R3
-    //P16 = MICROBIT_ID_IO_P16,
-    C19 = MICROBIT_ID_IO_P19, // SCL
-    C20 = MICROBIT_ID_IO_P20  // SDA
+    P0 = MICROBIT_ID_IO_P12,   // edge connector 0
+    P1 = MICROBIT_ID_IO_P0,    // edge connector 1
+    P2 = MICROBIT_ID_IO_P1,    // edge connector 2
+    P3 = MICROBIT_ID_IO_P16,   // edge connector 3
+    C4 = MICROBIT_ID_IO_P3,    // LED matrix C1
+    C5 = MICROBIT_ID_IO_P4,    // LED matrix C2
+    C6 = MICROBIT_ID_IO_P10,   // LED matrix C3
+    C7 = MICROBIT_ID_IO_P13,   // LED matrix C4
+    C8 = MICROBIT_ID_IO_P14,   // LED matrix C5
+    C9 = MICROBIT_ID_IO_P15,   // LED matrix C6
+    C10 = MICROBIT_ID_IO_P9,   // LED matrix C7
+    C11 = MICROBIT_ID_IO_P7,   // LED matrix C8
+    C12 = MICROBIT_ID_IO_P6,   // LED matrix C9
+    C16 = MICROBIT_ID_IO_P2,   // RX
+    C17 = MICROBIT_ID_IO_P8,   // TX
+    C18 = MICROBIT_ID_IO_P20,  // SDA
+    C19 = MICROBIT_ID_IO_P19   // SCL
 };
 
 enum class AnalogPin {
-    //P0 = MICROBIT_ID_IO_P0, -- does not work analogue
-    P1 = MICROBIT_ID_IO_P1,   // edge connector 1
-    P2 = MICROBIT_ID_IO_P2,   // edge connector 2
-    //P3 = CALLIOPE_ID_IO_P22, -- does not work analogue
-    C4 = MICROBIT_ID_IO_P3,
-    C5 = MICROBIT_ID_IO_P4,
-    C6 = MICROBIT_ID_IO_P10,
+    P1 = MICROBIT_ID_IO_P0,   // edge connector 1
+    P2 = MICROBIT_ID_IO_P1,   // edge connector 2
+    C4 = MICROBIT_ID_IO_P3,   // LED matrix C1
+    C5 = MICROBIT_ID_IO_P4,   // LED matrix C2
+    C6 = MICROBIT_ID_IO_P10,  // LED matrix C3
+    MIC = MICROBIT_ID_IO_P21  // microphone
 };
 
 enum class PulseValue {
@@ -56,28 +53,18 @@ MicroBitPin *getPin(int id) {
         case MICROBIT_ID_IO_P5: return &uBit.io.P5;
         case MICROBIT_ID_IO_P6: return &uBit.io.P6;
         case MICROBIT_ID_IO_P7: return &uBit.io.P7;
-        //case MICROBIT_ID_IO_P8: return &uBit.io.P8;
+        case MICROBIT_ID_IO_P8: return &uBit.io.P8;
         case MICROBIT_ID_IO_P9: return &uBit.io.P9;
         case MICROBIT_ID_IO_P10: return &uBit.io.P10;
         case MICROBIT_ID_IO_P11: return &uBit.io.P11;
-        //case MICROBIT_ID_IO_P12: return &uBit.io.P12;
-        //case MICROBIT_ID_IO_P13: return &uBit.io.P13;
-        //case MICROBIT_ID_IO_P14: return &uBit.io.P14;
-        //case MICROBIT_ID_IO_P15: return &uBit.io.P15;
-        //case MICROBIT_ID_IO_P16: return &uBit.io.P16;
+        case MICROBIT_ID_IO_P12: return &uBit.io.P12;
+        case MICROBIT_ID_IO_P13: return &uBit.io.P13;
+        case MICROBIT_ID_IO_P14: return &uBit.io.P14;
+        case MICROBIT_ID_IO_P15: return &uBit.io.P15;
+        case MICROBIT_ID_IO_P16: return &uBit.io.P16;
         case MICROBIT_ID_IO_P19: return &uBit.io.P19;
         case MICROBIT_ID_IO_P20: return &uBit.io.P20;
-        case CALLIOPE_ID_IO_P3: return &uBit.io.CAL_P3;
-        case CALLIOPE_ID_IO_P7: return &uBit.io.CAL_P7;
-        case CALLIOPE_ID_IO_P8: return &uBit.io.CAL_P8;
-        case CALLIOPE_ID_IO_P9: return &uBit.io.CAL_P9;
-        case CALLIOPE_ID_IO_P13: return &uBit.io.CAL_P13;
-        case CALLIOPE_ID_IO_P14: return &uBit.io.CAL_P14;
-        case CALLIOPE_ID_IO_P15: return &uBit.io.CAL_P15;
-        case CALLIOPE_ID_IO_P22: return &uBit.io.CAL_P22;
-        case CALLIOPE_ID_IO_P28: return &uBit.io.CAL_P28;
-        case CALLIOPE_ID_IO_P29: return &uBit.io.CAL_P29;
-        case CALLIOPE_ID_IO_P30: return &uBit.io.CAL_P30;
+        case MICROBIT_ID_IO_P21: return &uBit.io.P21;
         default: return NULL;
     }
 }

libs/core/pins.ts

@@ -1,7 +1,7 @@
 /**
  * Control currents in Pins for analog/digital signals, servos, i2c, ...
  */
-//% color=#A80000 weight=30
+//% color=#A80000 weight=30 icon="\uf140"
 //% advanced=true
 namespace pins {
     /**

libs/core/pxt.json

@@ -43,8 +43,7 @@
     "public": true,
     "dependencies": {},
     "yotta": {
-        "configIsJustDefaults": true,
-        "config": {
+        "optionalConfig": {
             "microbit-dal": {
                 "bluetooth": {
                     "enabled": 0

libs/core/serial.cpp

@@ -51,24 +51,27 @@ namespace serial {
     }
 
     /**
-     * Reads a line of text from the serial port.
-     */
-    //% help=serial/read-line
-    //% blockId=serial_read_line block="serial|read line"
-    //% weight=20 blockGap=8
-    StringData* readLine() {
-      return readUntil(ManagedString("\n").leakData());
+    * Reads the buffered received data as a string
+    */
+    //% blockId=serial_read_buffer block="serial|read string"
+    //% weight=18
+    StringData* readString() {
+      int n = uBit.serial.getRxBufferSize();
+      if (n == 0) return ManagedString("").leakData();
+      return ManagedString(uBit.serial.read(n, MicroBitSerialMode::ASYNC)).leakData();
     }
 
     /**
-    * Registers an event to be fired when one of the delimiter is matched
-    * @param delimiters the characters to match received characters against. eg:"\n"
+    * Registers an event to be fired when one of the delimiter is matched.
+    * @param delimiters the characters to match received characters against.
     */
-    // help=serial/on-data-received
-    // weight=18
+    //% help=serial/on-data-received
+    //% weight=18 blockId=serial_on_data_received block="serial|on data received %delimiters=serial_delimiter_conv"
     void onDataReceived(StringData* delimiters, Action body) {
       uBit.serial.eventOn(ManagedString(delimiters));
       registerWithDal(MICROBIT_ID_SERIAL, MICROBIT_SERIAL_EVT_DELIM_MATCH, body);
+      // lazy initialization of serial buffers
+      uBit.serial.read(MicroBitSerialMode::ASYNC);
     }
 
     /**

libs/core/serial.ts

@@ -1,7 +1,7 @@
 /**
  * Reading and writing data over a serial connection.
  */
-//% weight=2 color=#002050
+//% weight=2 color=#002050 icon="\uf287"
 //% advanced=true
 namespace serial {
     /**
@@ -38,20 +38,20 @@ namespace serial {
     }
 
     /**
-    * Registers an event to be fired when a line has been received
-    */
-    // help=serial/on-line-received
-    // blockId=serial_on_line_received block="serial on line received"
-    // weight=21 blockGap=8
-    export function onLineReceived(body: Action): void {
-       // serial.onDataReceived("\n", body);
+     * Reads a line of text from the serial port.
+     */
+    //% help=serial/read-line
+    //% blockId=serial_read_line block="serial|read line"
+    //% weight=20 blockGap=8
+    export function readLine(): string {
+        return serial.readUntil(delimiters(Delimiters.NewLine));
     }
 
     /**
      * Returns the delimiter corresponding string
      */
     //% blockId="serial_delimiter_conv" block="%del"
-    //% weight=1
+    //% weight=1 blockHidden=true
     export function delimiters(del: Delimiters): string {
         // even though it might not look like, this is more
         // (memory) efficient than the C++ implementation, because the

libs/core/shims.d.ts

@@ -4,7 +4,7 @@
     /**
      * Creation, manipulation and display of LED images.
      */
-    //% color=#5C2D91 weight=31
+    //% color=#5C2D91 weight=31 icon="\uf03e"
     //% advanced=true
 declare namespace images {
 
@@ -126,13 +126,13 @@ declare interface Image {
     /**
      * Provides access to basic micro:bit functionality.
      */
-    //% color=#54C9C9 weight=100
+    //% color=#54C9C9 weight=100 icon="\uf00a"
 declare namespace basic {
 
     /**
      * Sets the color on the build-in LED. Set to 0 to turn off.
      */
-    //% blockId=device_set_led_color block="set led to %color=color_id" icon="\uf00a"
+    //% blockId=device_set_led_color block="set led to %color=color_id"
     //% weight=50 shim=basic::setLedColor
     function setLedColor(color: number): void;
 
@@ -142,7 +142,7 @@ declare namespace basic {
      */
     //% help=basic/show-number
     //% weight=96
-    //% blockId=device_show_number block="show|number %number" blockGap=8 icon="\uf1ec"
+    //% blockId=device_show_number block="show|number %number" blockGap=8
     //% async
     //% parts="ledmatrix" interval.defl=150 shim=basic::showNumber
     function showNumber(value: number, interval?: number): void;
@@ -156,7 +156,7 @@ declare namespace basic {
     //% weight=95 blockGap=8
     //% imageLiteral=1 async
     //% blockId=device_show_leds
-    //% block="show leds" icon="\uf00a"
+    //% block="show leds"
     //% parts="ledmatrix" interval.defl=400 shim=basic::showLeds
     function showLeds(leds: string, interval?: number): void;
 
@@ -167,7 +167,7 @@ declare namespace basic {
      */
     //% help=basic/show-string 
     //% weight=87 blockGap=8
-    //% block="show|string %text" icon="\uf031" 
+    //% block="show|string %text" 
     //% async
     //% blockId=device_print_message
     //% parts="ledmatrix" interval.defl=150 shim=basic::showString
@@ -177,7 +177,7 @@ declare namespace basic {
      * Turn off all LEDs
      */
     //% help=basic/clear-screen weight=79
-    //% blockId=device_clear_display block="clear screen" icon="\uf12d"
+    //% blockId=device_clear_display block="clear screen"
     //% parts="ledmatrix" shim=basic::clearScreen
     function clearScreen(): void;
 
@@ -203,7 +203,7 @@ declare namespace basic {
      * @param body code to execute
      */
     //% help=basic/forever weight=55 blockGap=8
-    //% blockId=device_forever block="forever" icon="\uf01e" shim=basic::forever
+    //% blockId=device_forever block="forever" shim=basic::forever
     function forever(a: () => void): void;
 
     /**
@@ -212,13 +212,13 @@ declare namespace basic {
      */
     //% help=basic/pause weight=54
     //% async block="pause (ms) %pause"
-    //% blockId=device_pause icon="\uf110" shim=basic::pause
+    //% blockId=device_pause shim=basic::pause
     function pause(ms: number): void;
 }
 
 
 
-    //% color=#C90072 weight=99
+    //% color=#C90072 weight=99 icon="\uf192"
 declare namespace input {
 
     /**
@@ -227,7 +227,7 @@ declare namespace input {
      * @param body TODO
      */
     //% help=input/on-button-pressed weight=85 blockGap=8
-    //% blockId=device_button_event block="on button|%NAME|pressed" icon="\uf192"
+    //% blockId=device_button_event block="on button|%NAME|pressed"
     //% parts="buttonpair" shim=input::onButtonPressed
     function onButtonPressed(button: Button, body: () => void): void;
 
@@ -236,7 +236,7 @@ declare namespace input {
      * @param body TODO
      */
     //% help=input/on-gesture weight=84 blockGap=8
-    //% blockId=device_gesture_event block="on |%NAME" icon="\uf135"
+    //% blockId=device_gesture_event block="on |%NAME"
     //% parts="accelerometer" shim=input::onGesture
     function onGesture(gesture: Gesture, body: () => void): void;
 
@@ -246,7 +246,7 @@ declare namespace input {
      * @param body the code to run when the pin is pressed
      */
     //% help=input/on-pin-pressed weight=83
-    //% blockId=device_pin_event block="on pin %NAME|pressed" icon="\uf094" shim=input::onPinPressed
+    //% blockId=device_pin_event block="on pin %NAME|pressed" shim=input::onPinPressed
     function onPinPressed(name: TouchPin, body: () => void): void;
 
     /**
@@ -255,7 +255,7 @@ declare namespace input {
      * @param body the code to run when the pin is released
      */
     //% help=input/on-pin-released weight=6 blockGap=8
-    //% blockId=device_pin_released block="on pin %NAME|released" icon="\uf094"
+    //% blockId=device_pin_released block="on pin %NAME|released"
     //% advanced=true shim=input::onPinReleased
     function onPinReleased(name: TouchPin, body: () => void): void;
 
@@ -265,7 +265,7 @@ declare namespace input {
     //% help=input/button-is-pressed weight=60
     //% block="button|%NAME|is pressed"
     //% blockId=device_get_button2
-    //% icon="\uf192" blockGap=8
+    //% blockGap=8
     //% parts="buttonpair" shim=input::buttonIsPressed
     function buttonIsPressed(button: Button): boolean;
 
@@ -274,7 +274,7 @@ declare namespace input {
      * @param name pin used to detect the touch
      */
     //% help=input/pin-is-pressed weight=58
-    //% blockId="device_pin_is_pressed" block="pin %NAME|is pressed" icon="\uf094"
+    //% blockId="device_pin_is_pressed" block="pin %NAME|is pressed"
     //% blockGap=8 shim=input::pinIsPressed
     function pinIsPressed(name: TouchPin): boolean;
 
@@ -282,7 +282,7 @@ declare namespace input {
      * Get the acceleration value in milli-gravitys (when the board is laying flat with the screen up, x=0, y=0 and z=-1024)
      * @param dimension TODO
      */
-    //% help=input/acceleration weight=58 icon="\uf135"
+    //% help=input/acceleration weight=58
     //% blockId=device_acceleration block="acceleration (mg)|%NAME" blockGap=8
     //% parts="accelerometer" shim=input::acceleration
     function acceleration(dimension: Dimension): number;
@@ -291,7 +291,7 @@ declare namespace input {
      * Reads the light level applied to the LED screen in a range from ``0`` (dark) to ``255`` bright.
      */
     //% help=input/light-level weight=57
-    //% blockId=device_get_light_level block="light level" blockGap=8 icon="\uf185"
+    //% blockId=device_get_light_level block="light level" blockGap=8
     //% parts="ledmatrix" shim=input::lightLevel
     function lightLevel(): number;
 
@@ -299,7 +299,7 @@ declare namespace input {
      * Get the current compass heading in degrees.
      */
     //% help=input/compass-heading
-    //% weight=56 icon="\uf14e"
+    //% weight=56
     //% blockId=device_heading block="compass heading (°)" blockGap=8
     //% parts="compass" shim=input::compassHeading
     function compassHeading(): number;
@@ -307,7 +307,7 @@ declare namespace input {
     /**
      * Gets the temperature in Celsius degrees (°C).
      */
-    //% weight=55 icon="\uf06d"
+    //% weight=55
     //% help=input/temperature
     //% blockId=device_temperature block="temperature (°C)" blockGap=8
     //% parts="thermometer" shim=input::temperature
@@ -318,7 +318,7 @@ declare namespace input {
      * @param kind TODO
      */
     //% help=input/rotation weight=52
-    //% blockId=device_get_rotation block="rotation (°)|%NAME" blockGap=8 icon="\uf197"
+    //% blockId=device_get_rotation block="rotation (°)|%NAME" blockGap=8
     //% parts="accelerometer" advanced=true shim=input::rotation
     function rotation(kind: Rotation): number;
 
@@ -327,7 +327,7 @@ declare namespace input {
      * @param dimension TODO
      */
     //% help=input/magnetic-force weight=51
-    //% blockId=device_get_magnetic_force block="magnetic force (µT)|%NAME" blockGap=8 icon="\uf076"
+    //% blockId=device_get_magnetic_force block="magnetic force (µT)|%NAME" blockGap=8
     //% parts="compass"
     //% advanced=true shim=input::magneticForce
     function magneticForce(dimension: Dimension): number;
@@ -336,7 +336,7 @@ declare namespace input {
      * Gets the number of milliseconds elapsed since power on.
      */
     //% help=input/running-time weight=50
-    //% blockId=device_get_running_time block="running time (ms)" icon="\uf017"
+    //% blockId=device_get_running_time block="running time (ms)"
     //% advanced=true shim=input::runningTime
     function runningTime(): number;
 
@@ -351,7 +351,7 @@ declare namespace input {
      * @param range a value describe the maximum strengh of acceleration measured
      */
     //% help=input/set-accelerometer-range
-    //% blockId=device_set_accelerometer_range block="set accelerometer|range %range" icon="\uf135"
+    //% blockId=device_set_accelerometer_range block="set accelerometer|range %range"
     //% weight=5
     //% parts="accelerometer"
     //% advanced=true shim=input::setAccelerometerRange
@@ -432,7 +432,7 @@ declare namespace control {
 
 
 
-    //% color=#8169E6 weight=35
+    //% color=#8169E6 weight=35 icon="\uf205"
 declare namespace led {
 
     /**
@@ -441,7 +441,7 @@ declare namespace led {
      * @param y TODO
      */
     //% help=led/plot weight=78
-    //% blockId=device_plot block="plot|x %x|y %y" icon="\uf205" blockGap=8
+    //% blockId=device_plot block="plot|x %x|y %y" blockGap=8
     //% parts="ledmatrix" shim=led::plot
     function plot(x: number, y: number): void;
 
@@ -451,7 +451,7 @@ declare namespace led {
      * @param y TODO
      */
     //% help=led/unplot weight=77
-    //% blockId=device_unplot block="unplot|x %x|y %y" icon="\uf204" blockGap=8
+    //% blockId=device_unplot block="unplot|x %x|y %y" blockGap=8
     //% parts="ledmatrix" shim=led::unplot
     function unplot(x: number, y: number): void;
 
@@ -461,7 +461,7 @@ declare namespace led {
      * @param y TODO
      */
     //% help=led/point weight=76
-    //% blockId=device_point block="point|x %x|y %y" icon="\uf10c"
+    //% blockId=device_point block="point|x %x|y %y"
     //% parts="ledmatrix" shim=led::point
     function point(x: number, y: number): boolean;
 
@@ -469,7 +469,7 @@ declare namespace led {
      * Get the screen brightness from 0 (off) to 255 (full bright).
      */
     //% help=led/brightness weight=60
-    //% blockId=device_get_brightness block="brightness" icon="\uf042" blockGap=8
+    //% blockId=device_get_brightness block="brightness" blockGap=8
     //% parts="ledmatrix"
     //% advanced=true shim=led::brightness
     function brightness(): number;
@@ -479,7 +479,7 @@ declare namespace led {
      * @param value the brightness value, eg:255, 127, 0
      */
     //% help=led/set-brightness weight=59
-    //% blockId=device_set_brightness block="set brightness %value" icon="\uf042"
+    //% blockId=device_set_brightness block="set brightness %value"
     //% parts="ledmatrix"
     //% advanced=true shim=led::setBrightness
     function setBrightness(value: number): void;
@@ -488,7 +488,7 @@ declare namespace led {
      * Cancels the current animation and clears other pending animations.
      */
     //% weight=50 help=led/stop-animation
-    //% blockId=device_stop_animation block="stop animation" icon="\uf04d"
+    //% blockId=device_stop_animation block="stop animation"
     //% parts="ledmatrix"
     //% advanced=true shim=led::stopAnimation
     function stopAnimation(): void;
@@ -504,7 +504,7 @@ declare namespace led {
     /**
      * Turns on or off the display    
      */
-    //% help=led/enable blockId=device_led_enable icon="\uf04d"
+    //% help=led/enable blockId=device_led_enable
     //% advanced=true parts="ledmatrix" shim=led::enable
     function enable(on: boolean): void;
 
@@ -520,7 +520,7 @@ declare namespace led {
     /**
      * Blocks to control the onboard motors
      */
-    //% color=#008272 weight=30
+    //% color=#008272 weight=30 icon="\uf1b9"
 declare namespace motors {
 
     /**
@@ -715,12 +715,19 @@ declare namespace serial {
     function readUntil(delimiter: string): string;
 
     /**
-     * Reads a line of text from the serial port.
+     * Reads the buffered received data as a string
      */
-    //% help=serial/read-line
-    //% blockId=serial_read_line block="serial|read line"
-    //% weight=20 blockGap=8 shim=serial::readLine
-    function readLine(): string;
+    //% blockId=serial_read_buffer block="serial|read string"
+    //% weight=18 shim=serial::readString
+    function readString(): string;
+
+    /**
+     * Registers an event to be fired when one of the delimiter is matched.
+     * @param delimiters the characters to match received characters against.
+     */
+    //% help=serial/on-data-received
+    //% weight=18 blockId=serial_on_data_received block="serial|on data received %delimiters=serial_delimiter_conv" shim=serial::onDataReceived
+    function onDataReceived(delimiters: string, body: () => void): void;
 
     /**
      * Sends a piece of text through Serial connection.

libs/radio/radio.ts

@@ -1,7 +1,7 @@
 /**
  * Communicate data using radio packets
  */
-//% color=#E3008C weight=34
+//% color=#E3008C weight=34 icon="\uf012"
 namespace radio {
     export class Packet {
         /**

package.json

@@ -1,7 +1,7 @@
 {
   "name": "pxt-calliope",
-  "version": "0.7.15",
-  "description": "calliope target for PXT",
+  "version": "0.8.6",
+  "description": "Calliope Mini editor for PXT",
   "keywords": [
     "JavaScript",
     "education",
@@ -34,6 +34,6 @@
     "semantic-ui-less": "^2.2.4"
   },
   "dependencies": {
-    "pxt-core": "0.10.10"
+    "pxt-core": "0.11.11"
   }
 }

pxtarget.json

@@ -21,7 +21,7 @@
         "githubPackages": true
     },
     "compile": {
-        "isNative": false,
+        "isNative": true,
         "hasHex": true,
         "deployDrives": "MINI",
         "driveName": "MINI",
@@ -116,7 +116,7 @@
                 "C19": "C_P19",
                 "C20": "C_P20",
                 "EXT_PWR":"EXT_PWR", 
-                "SPKR":"EXT_PWR", 
+                "SPKR":"SPKR",
                 "BTN_A": "BTN_A", 
                 "BTN_B": "BTN_B",
                 "MOTOR1": "M_OUT1",
@@ -170,9 +170,9 @@
         "yottaTarget": "bbc-microbit-classic-gcc",
         "yottaCorePackage": "microbit",
         "githubCorePackage": "calliope-mini/microbit",
-        "gittag": "v1.0.3-calliope",
+        "gittag": "2.0.0-rc7-calliope-p3",
         "serviceId": "microbit"
-    },
+    },    
     "serial": {
         "manufacturerFilter": "^mbed$",
         "nameFilter": "^mbed Serial Port",
@@ -189,7 +189,7 @@
         "cardLogo": "./static/icons/apple-touch-icon.png",
         "appLogo": "./static/icons/apple-touch-icon.png",
         "homeUrl": "https://calliope.cc/",
-        "embedUrl": "https://calliope.cc/",
+        "embedUrl": "https://mini.pxt.io/",
         "privacyUrl": "https://go.microsoft.com/fwlink/?LinkId=521839",
         "termsOfUseUrl": "https://go.microsoft.com/fwlink/?LinkID=206977",
         "githubUrl": "https://github.com/Microsoft/pxt-calliope",
@@ -292,6 +292,7 @@
         "invertedMenu": true,
         "invertedToolbox": true,
         "monacoToolbox": false,
+        "hasAudio": true,        
         "simAnimationEnter": "rotate in",
         "simAnimationExit": "rotate out",
         "blocklyOptions": { 

sim/dalboard.ts

@@ -41,25 +41,26 @@ namespace pxsim {
                     DAL.MICROBIT_ID_IO_P5,
                     DAL.MICROBIT_ID_IO_P6,
                     DAL.MICROBIT_ID_IO_P7,
-                    0, //DAL.MICROBIT_ID_IO_P8,
+                    DAL.MICROBIT_ID_IO_P8,
                     DAL.MICROBIT_ID_IO_P9,
                     DAL.MICROBIT_ID_IO_P10,
                     DAL.MICROBIT_ID_IO_P11,
-                    0, //DAL.MICROBIT_ID_IO_P12,
-                    0, //DAL.MICROBIT_ID_IO_P13,
-                    0, //DAL.MICROBIT_ID_IO_P14,
-                    0, //DAL.MICROBIT_ID_IO_P15,
-                    0, //DAL.MICROBIT_ID_IO_P16,
+                    DAL.MICROBIT_ID_IO_P12,
+                    DAL.MICROBIT_ID_IO_P13,
+                    DAL.MICROBIT_ID_IO_P14,
+                    DAL.MICROBIT_ID_IO_P15,
+                    DAL.MICROBIT_ID_IO_P16,
                     0,
                     0,
                     DAL.MICROBIT_ID_IO_P19,
-                    DAL.MICROBIT_ID_IO_P20
+                    DAL.MICROBIT_ID_IO_P20,
+                    DAL.MICROBIT_ID_IO_P21
                 ],
                 servos: {
-                    "P0": DAL.MICROBIT_ID_IO_P0,
-                    "P1": DAL.MICROBIT_ID_IO_P1,
-                    "P2": DAL.MICROBIT_ID_IO_P2,
-                    "P3": DAL.MICROBIT_ID_IO_P3
+                    "P0": DAL.MICROBIT_ID_IO_P12,
+                    "P1": DAL.MICROBIT_ID_IO_P0,
+                    "P2": DAL.MICROBIT_ID_IO_P1,
+                    "P3": DAL.MICROBIT_ID_IO_P16
                 }
             });
             this.builtinParts["radio"] = this.radioState = new RadioState(runtime);

sim/state/ledmatrix.ts

@@ -53,9 +53,9 @@ namespace pxsim {
         }
 
         public shiftRight(cols: number) {
-            for (let x = this.width - 1; x <= 0; --x)
+            for (let x = this.width - 1; x >= 0; --x)
                 for (let y = 0; y < 5; ++y)
-                    this.set(x, y, x > cols ? this.get(x - cols, y) : 0);
+                    this.set(x, y, x >= cols ? this.get(x - cols, y) : 0);
         }
 
         public clear(): void {
@@ -195,11 +195,16 @@ namespace pxsim.ImageMethods {
         board().ledMatrixState.animationQ.enqueue({
             interval: interval,
             frame: () => {
-                //TODO: support right to left.
                 if (off >= leds.width || off < 0) return false;
-                stride > 0 ? display.shiftLeft(stride) : display.shiftRight(-stride);
-                let c = Math.min(stride, leds.width - off);
-                leds.copyTo(off, c, display, 5 - stride)
+                if (stride > 0) {
+                    display.shiftLeft(stride);
+                    const c = Math.min(stride, leds.width - off);
+                    leds.copyTo(off, c, display, 5 - stride)
+                } else {
+                    display.shiftRight(-stride);
+                    const c = Math.min(-stride, leds.width - off);
+                    leds.copyTo(off, c, display, 0)
+                }
                 off += stride;
                 return true;
             },
@@ -223,7 +228,7 @@ namespace pxsim.basic {
             clearScreen();
             pause(interval * 5);
         } else {
-            if (s.length == 1) showLeds(createImageFromString(s + " "), interval * 5)
+            if (s.length == 1) showLeds(createImageFromString(s), 0);
             else ImageMethods.scrollImage(createImageFromString(s + " "), 1, interval);
         }
     }

sim/state/serial.ts

@@ -35,18 +35,14 @@ namespace pxsim.serial {
         board().writeSerial(s);
     }
 
+    export function readUntil(del: string): string {
+        return readString();
+    }
+
     export function readString(): string {
         return board().serialState.readSerial();
     }
 
-    export function readLine(): string {
-        return board().serialState.readSerial();
-    }
-
-    export function readUntil(del: string): string {
-        return readLine();
-    }
-
     export function onDataReceived(delimiters: string, handler: RefAction) {
         let b = board();
         b.bus.listen(DAL.MICROBIT_ID_SERIAL, DAL.MICROBIT_SERIAL_EVT_DELIM_MATCH, handler);

theme/style.less

@@ -12,17 +12,23 @@
 /*******************************
     Add your custom CSS here
 *******************************/
+/* not relevant in new UI
 .openproject {
     background: #4ECC60 !important;
-}
+} */
 
 .blocks-menuitem.active, .javascript-menuitem.active {
     background: #738791 !important;
 }
 
+/* not relevant in new UI
 .help-dropdown-menuitem, .more-dropdown-menuitem {
     background: #424955 !important;
     margin-right:0px !important;
+} */
+
+.huge.download-button i {
+    display:none !important; // otherwise spans 2 lines
 }
 
 .play-button {
@@ -45,36 +51,18 @@
              Blockly
 *******************************/
 
-.blocklyTreeRow {
-    border-radius:5px;
-}
-
-/* Specifying top and bottom rounded toolbox borders. */
-.blocklyTreeRow.blocklyTreeRowTop {
-    border-top-left-radius: 10px;
-    border-top-right-radius: 10px;
-}
-
-.blocklyTreeRow.blocklyTreeRowBottom {
-    border-bottom-left-radius: 10px;
-    border-bottom-right-radius: 10px;
-}
-
-.blocklyTreeRow:hover {
-    background: @invertedBackground !important;
+div.blocklyTreeRow {
+    border-radius:8px;
 }
 
 /* This removes any padding at the top of the toolbox */
-.blocklyTreeRoot {
+div.blocklyTreeRoot {
     padding: 0px !important;
 }
 
 /* Blockly Text */
-.blocklyTreeLabel {
+div.blocklyTreeLabel {
     font-family: @pageFont !important;
-}
-
-.blocklyTreeLabel {
     font-size:1rem !important;
 }
 
@@ -83,25 +71,9 @@
 }
 
 .blocklyToolboxDiv {
-    /*left:30px !important;*/
     padding:7px;
 }
 
-/* Blockly Toolbox Buttons */
-.blocklyToolboxButtons .blocklyAddPackageButton {
-    &:extend(.ui.button all);
-    &:extend(.circular all);
-    background-color: rgba(0, 0, 0, 0.3);
-    color: white;
-}
-
-.blocklyToolboxButtons .blocklyUndoButton {
-    &:extend(.ui.button all);
-    &:extend(.circular all);
-    background-color: rgba(0, 0, 0, 0.3);
-    color: white;
-}
-
 .organization {
     top: 1.6em;
 }

theme/theme.config

@@ -32,7 +32,7 @@
 @input      : 'pxt';
 @label      : 'pxt';
 @list       : 'pxt';
-@loader     : 'pulsar';
+@loader     : 'pxt';
 @rail       : 'pxt';
 @reveal     : 'pxt';
 @segment    : 'pxt';

webmanifest.json

@@ -1,5 +1,5 @@
 {
-	"name": "pxt.microbit.org",
+	"name": "mini.pxt.io",
 	"icons": [
 		{
 			"src": "./static/icons/android-chrome-36x36.png",