0.9.8

* delay initializing the global icons, so we don't generate them for each hex file

* Moving the strings to flash

.vscode/settings.json

@@ -1,6 +1,6 @@
 // Place your settings in this file to overwrite default and user settings.
 {
-    "file.autoSave": "afterDelay",   
+    "files.autoSave": "afterDelay",
     "files.watcherExclude": {
         "**/.git/objects/**": true,
         "**/built/**": true,

THIRD-PARTY-NOTICES.txt

@@ -0,0 +1,43 @@
+/*!----------------- PXT ThirdPartyNotices -------------------------------------------------------
+
+PXT uses third party material from the projects listed below.
+The original copyright notice and the license under which Microsoft
+received such third party material are set forth below. Microsoft
+reserves all other rights not expressly granted, whether by
+implication, estoppel or otherwise.
+
+In the event that we accidentally failed to list a required notice, please
+bring it to our attention. Post an issue or email us:
+
+           abchatra@microsoft.com
+
+---------------------------------------------
+Third Party Code Components
+---------------------------------------------
+
+Some code derived (as noted) from
+
+https://github.com/bbcmicrobit/micropython
+
+The MIT License (MIT)
+
+Copyright (c) 2013-2016 The MicroPython-on-micro:bit Developers, as listed
+in the accompanying AUTHORS file
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

clients/chrome/README.md

@@ -1,5 +1,5 @@
 # microbit-chrome
-Prototype chrome addon that exposes the micro:bit's serial output to webpages. 
+Prototype chrome addon that exposes the @boardname@'s serial output to webpages. 
 * watch the [demo video](https://vimeo.com/146207766)
 
 # Installation

docs/blocks.md

@@ -2,6 +2,10 @@
 
 ### @description Language constructs for the Block editor.
 
+Blocks snap into each other to define the program that your @boardname@ will run.
+Blocks can be event (buttons, shake, ...) or need to be snapped into an event to run. 
+The [on-start](/blocks/on-start) event runs first.
+
 ```namespaces
 for (let i = 0;i<5;++i) {}
 if (true){}

docs/blocks/on-start.md

@@ -16,7 +16,13 @@ input.onButtonPressed(Button.A, () => {
 led.setBrightness(50)
 ```
 
-
 ## What about JavaScript?
 
 ``on-start`` only exists in the block editor. In JavaScript, all code executes sequentially from the first line.
+
+## Hey, my events moved!
+
+When we transform the blocks into JavaScript, we always place all the event registrations (buttons, shake, ...) 
+before launching the ``on start`` code.
+
+If a block from ``on start`` pauses, other registered events will have the opportunity to run as well.

docs/device/servo.md

@@ -1,13 +1,4 @@
-# Preparing the servo
-### @description Connecting the servo to crocodile clips
-
-### ~avatar avatar
-
-Equip the microservo with crocodile clips.
-
-### ~
-
-## Duration: ~30 minutes
+# Equipping a microservo with Crocodile clips
 
 ## Materials
   * Cutting pliers or wire cutter
@@ -70,7 +61,7 @@ Place the cables next to each other
 
 It is very **important** to ensure that there is a good connection between the 2 cables.
 If the connection is weak, the microservo will not receive enough current and it will not work.
-If you have access to a soldering iron, we strongly recommend to solver this connection.
+**If you have access to a soldering iron, we strongly recommend to solder this connection.**
 
 ### ~
 
@@ -105,11 +96,9 @@ When attaching the crocodile clips to the pins, don't hesitate to grab the side
 * Download the following code to your @boardname@
 
 ```blocks
-let a = 0
 basic.forever(() => {
-    a = input.acceleration(Dimension.X)
     pins.servoWritePin(AnalogPin.P0, pins.map(
-        a,
+        input.acceleration(Dimension.X),
         -512,
         512,
         0,
@@ -121,10 +110,7 @@ basic.forever(() => {
 * When powered by USB, make sure that the servo moves when you tilt the board.
 * When powered by batteries **only**, make sure that the servo moves when you tilt the board.
 
+## Troubleshooting
+
 If your servo seems to sutter and stay stuck at a particular position, it means that it is not receiving enough power.
-This is probably due to a weak connection or low battery level. Check each connection and check your batteries.
-
-
-### ~button /projects/inchworm/chassis
-NEXT: Chassis
-### ~
+This is probably due to a weak connection or low battery level. Check each connection and check your batteries.

docs/docs.md

@@ -6,6 +6,7 @@
 
 * **[Getting Started](/getting-started)**
 * [Projects](/projects)
+* [Examples](/examples)
 * [Lessons](/lessons)
 
 ### @boardname@ reference

docs/examples.md

@@ -0,0 +1,35 @@
+# Examples
+
+Here are some fun programs for your @boardname@!
+
+## Fun stuff
+
+```codecard
+[{
+  "name": "Blinky",
+  "url":"/examples/blinky"
+},
+{
+  "name": "Name Tag",
+  "url":"/examples/name-tag"
+},
+{
+  "name": "Rando",
+  "url":"/examples/rando"
+}]
+```
+
+## Sensors
+
+```codecard
+[{
+  "name": "Plot Acceleration",
+  "url":"/examples/plot-acceleration"
+}, {
+  "name": "Plot Light Level",
+  "url":"/examples/plot-light-level"
+}, {
+  "name": "Plot Analog Pin",
+  "url":"/examples/plot-analog-pin"
+}]
+```

docs/examples/blinky.md

@@ -0,0 +1,20 @@
+# Blinky
+
+```blocks
+basic.forever(() => {
+    basic.showLeds(`
+        . # . # .
+        # # # # #
+        # # # # #
+        . # # # .
+        . . # . .`
+        );
+    basic.showLeds(`
+        . . . . .
+        . . . . .
+        . . . . .
+        . . . . .
+        . . . . .`
+        );
+})
+```

docs/examples/name-tag.md

@@ -0,0 +1,7 @@
+# Name Tag
+
+```blocks
+basic.forever(() => {
+    basic.showString("JAMES")
+})
+```

docs/examples/plot-acceleration.md

@@ -0,0 +1,10 @@
+# Plot Acceleration
+
+```blocks
+basic.forever(() => {
+    led.plotBarGraph(
+        input.acceleration(Dimension.X),
+        1023
+    )
+})
+```

docs/examples/plot-analog-pin.md

@@ -0,0 +1,10 @@
+# Plot Analog Pin
+
+```blocks
+basic.forever(() => {
+    led.plotBarGraph(
+        pins.analogReadPin(AnalogPin.P0),
+        1023
+    )
+})
+```

docs/examples/plot-light-level.md

@@ -0,0 +1,10 @@
+# Plot Light level
+
+```blocks
+basic.forever(() => {
+    led.plotBarGraph(
+        input.lightLevel(),
+        255
+    )
+})
+```

docs/examples/rando.md

@@ -0,0 +1,7 @@
+# Rando
+
+```blocks
+basic.forever(() => {
+    led.toggle(Math.random(5), Math.random(5))
+})
+```

docs/index-ref.json

@@ -1,3 +1,3 @@
 {
-    "appref": "v0.6.36"
+    "appref": "v0.7.41"
 }

docs/packages.md

@@ -3,27 +3,48 @@
 You can publish libraries (also known as packages or extensions)
 that users can then add to their scripts. These typically
 provide a driver for a particular hardware device you can connect
-to a microbit.
+to a microbit. 
+
+### ~ hint
+
+All packages need to be approved by the Micro:bit Foundation before being available in the web editor.
+See **Approval** section below.
+
+### ~
 
-* [pxt-max6675](https://github.com/Microsoft/pxt-max6675) -- TypeScript
 * [pxt-neopixel](https://github.com/Microsoft/pxt-neopixel) -- TypeScript + ARM Thumb assembly package
+* [pxt-max6675](https://github.com/Microsoft/pxt-max6675) -- TypeScript
 * [pxt-sonar](https://github.com/microsoft/pxt-sonar) -- TypeScript
 * [pxt-i2c-fram](https://github.com/microsoft/pxt-i2c-fram) -- TypeScript
 
 * [Sample C++ extension](https://github.com/Microsoft/pxt-microbit-cppsample)
-* [Sample TypeScript extension](https://github.com/Microsoft/pxt-microbit/tree/master/libs/i2c-fram)
 
 ## Finding packages
 
-From the editor, the user clicks on **More** then **Add Package** and searches for the package. 
+From the block editor, the user clicks on **Add Package** and searches for the package. 
+Otherwise, the **Add Package** is also available from the gearwheel menu.
 
-To see the list of packages, click on **More** then **Show Files** to see the project file list.
+To see the list of packages, switch to JavaScript and use the **Explorer** view to find them.
 
-To remove a package, click on the garbage button in the file list next to the package.
+To remove a package, click on the garbage button in the **Explorer** view next to the package.
 
-## Publishing packages
+## Publishing and Approving packages
 
-Packages can be published from the pxt command line. Check out [the docs](https://www.pxt.io/packages).
+Once your package is ready, follow these steps to get it approved and listed in the pxt.microbit.org web site:
+
+1. setup a public GitHub repository with your package sources
+2. ensure that the license is **Apache2** or **MIT**
+3. fill ``test.ts`` with a test scenario
+4. ensure that the package builds by running ``pxt`` from the package folder. [Read more...](https://www.pxt.io/packages).
+5. fill up the ``README.md`` file with documentation. See [markdown docs](https://pxt.io/writing-docs) for syntax.
+6. publish a release by running ``pxt bump`` from the package folder.
+7. open a support ticket at https://support.microbit.org, add **package approval** in the subject line.
+
+```
+Package approval request
+
+github repo: .....
+```
 
 ## Localizing packages
 

docs/projects.md

@@ -62,17 +62,13 @@ Fun games to build with your @boardname@.
 }]
 ```
 
-## Science and Engineering
+## Toys
 
 ```codecard
 [{
   "name": "Inchworm",
   "url":"/projects/inchworm",
   "imageUrl":"/static/mb/projects/inchworm.jpg"
-}, {
-  "name": "Timing gates",
-  "url":"/projects/timing-gates",
-  "imageUrl":"/static/mb/projects/timing-gates.jpg"
 }]
 ```
 
@@ -80,6 +76,10 @@ Fun games to build with your @boardname@.
 
 ```codecard
 [{
+  "name": "Timing gates",
+  "url":"/projects/timing-gates",
+  "imageUrl":"/static/mb/projects/timing-gates.jpg"
+}, {
   "name": "Compass",
   "url":"/projects/compass",
   "imageUrl":"/static/mb/projects/a5-compass.png"
@@ -96,4 +96,4 @@ Fun games to build with your @boardname@.
 
 ### See Also
 
-[Flashing Heart](/projects/flashing-heart), [Smiley Buttons](/projects/smiley-buttons), [Love Meter](/projects/love-meter), [Rock Paper Scissors](/projects/rock-paper-scissors), [Compass](/projects/compass), [Hack your headphones](/projects/hack-your-headphones), [Banana keyboard](/projects/banana-keyboard), [Telegraph](/projects/telegraph), [Radio](/projects/radio), [Guitar](/projects/guitar), [Wallet](/projects/wallet), [Watch](/projects/watch)
+[Flashing Heart](/projects/flashing-heart), [Smiley Buttons](/projects/smiley-buttons), [Love Meter](/projects/love-meter), [Rock Paper Scissors](/projects/rock-paper-scissors), [Compass](/projects/compass), [Hack your headphones](/projects/hack-your-headphones), [Banana keyboard](/projects/banana-keyboard), [Telegraph](/projects/telegraph), [Radio](/projects/radio), [Guitar](/projects/guitar), [Wallet](/projects/wallet), [Watch](/projects/watch)

docs/projects/banana-keyboard.md

@@ -21,8 +21,8 @@ Build your own @boardname@ piano using bananas!
 
 ## Activities
 
-* [Making the keyboard](/projects/banana-keyboard/make)  
-* [Beat box](/projects/banana-keyboard/beat-box)
+* [Make](/projects/banana-keyboard/make)  
+* [Code](/projects/banana-keyboard/code)
 
 ### ~button /projects/banana-keyboard/make
 Let's get started!

docs/projects/banana-keyboard/code.md

@@ -1,4 +1,4 @@
-# banana keyboard - beat box
+# Code
 
 Have you ever tried to making beat box sounds? Let's try making a beatbox with code!
 

docs/projects/banana-keyboard/make.md

@@ -1,4 +1,4 @@
-# banana keyboard - making
+# Make
 
 ## Materials
 
@@ -80,6 +80,6 @@ input.onPinPressed(TouchPin.P1, () => {
 
 Tap your banana instrument to play sound against... the fruit!
 
-### ~button /projects/banana-keyboard/beat-box
+### ~button /projects/banana-keyboard/code
 NEXT: beat box
 ### ~

docs/projects/coffee-cup-monster.md

@@ -0,0 +1,43 @@
+
+# Coffee Cup Monster
+
+### @description A monster made of cardboard that responds to light
+
+### ~avatar avatar
+
+Make a coffee cup monster that responds to light!
+
+### ~
+
+https://youtu.be/BiZLjugXMbM
+
+## Duration
+
+3 Activities, approx 30-45 min each based on familiarity with the coding concepts
+
+## Materials
+
+* 3 Coffee cup holders
+* 2 Coffee cup strirer wood sticks
+* Glue gun
+* Scissors that can cut cardboard
+* 1 @boardname@, battery holder and 2 AAA batteries
+* 3 Crocodile clips
+* 1 micro servo 9g SG90
+* 1 paper clip
+
+## Preparation
+
+* [Equip the microservo with crocodile clips](/device/servo)
+
+## Activities
+
+* [Make](/projects/coffee-cup-monster/make)  
+* [Code](/projects/coffee-cup-monster/code)  
+* [Connect](/projects/coffee-cup-monster/connect)  
+
+### ~button /projects/coffee-cup-monster/make
+
+Let's get started!
+
+### ~

docs/projects/coffee-cup-monster/code.md

@@ -0,0 +1,29 @@
+# Code
+### @description code to make the coffee cup monster alive
+
+### ~avatar avatar
+
+Add code to open the mouth when light is detected.
+
+### ~
+
+## Duration: ~30 minutes
+
+We are going to add code to open the mouth proportionally to the amount of light on the @boardname@.
+In a loop, we will read the light and map it to an angle using the ``pins.map`` function.
+
+```blocks
+basic.forever(() => {
+    pins.servoWritePin(AnalogPin.P0, pins.map(
+        input.lightLevel(),
+        0,
+        255,
+        30,
+        150
+    ))
+})
+```
+
+### ~button /projects/coffee-cup-monster/connect
+NEXT: Connect
+### ~

docs/projects/coffee-cup-monster/connect.md

@@ -0,0 +1,29 @@
+# Connect
+
+### ~avatar avatar
+
+Remote control your monster with another @boardname@
+
+### ~
+
+## Duration: ~30 minutes
+
+You will need 2 @boardname@ for this part. By using the radio, we can make the inchworm controlled by another @boardname@.
+Download the code below to the @boardname@ on the inchworm and another "controller" @boardname@. 
+Whenere A is pressed, the monster will open and close it's mouth will move once.
+
+```blocks
+radio.onDataPacketReceived(({receivedNumber}) => {
+    pins.servoWritePin(AnalogPin.P0, 30)
+    basic.pause(500)
+    pins.servoWritePin(AnalogPin.P0, 150)
+    basic.pause(500)
+})
+input.onButtonPressed(Button.A, () => {
+    radio.sendNumber(0)
+})
+```
+
+```package
+radio
+```

docs/projects/coffee-cup-monster/make.md

@@ -0,0 +1,25 @@
+# Make
+### @description Building the coffee cup monster
+
+### ~avatar avatar
+
+Turn a piece of coffee holders into a monster!
+
+### ~
+
+## Duration: ~60 minutes
+
+## Materials
+  * 3 Coffee cup holders
+  * 2 Coffee cup strirer wood sticks
+  * Scissors
+  * glue gun or tape
+  * 1 paper clip
+
+## Step 1: cardboard
+
+TODO
+
+### ~button /projects/coffee-cup-monster/code
+NEXT: Code
+### ~

docs/projects/guitar/pinpress.md

@@ -21,7 +21,7 @@ Use pin press to switch guitar play on/off
 ## Blocks
 
 ```cards
-var on = false
+let on = false
 on;
 if (on) { } else {}
 input.onPinPressed(TouchPin.P1, () => {})
@@ -106,7 +106,7 @@ input.onPinPressed(TouchPin.P1, () => {
 *Final code*
 TODO: do we want to use `on = !on;` or be more direct in flipping the switch? `on = true; on = false;`
 ```blocks
-var on = false
+let on = false
 basic.forever(() => {
     if (on) {
         music.setTempo(pins.map(Math.abs(input.acceleration(Dimension.Y)),

docs/projects/hack-your-headphones.md

@@ -27,8 +27,8 @@ Build your own music player @boardname@ from headphones.
 
 ## Activities
 
-* [Connect your headphone](/projects/hack-your-headphones/make)
-* [Play sounds!]()
+* [Make](/projects/hack-your-headphones/make)
+* [Code](/projects/hack-your-headphones/code)
 
 ### ~button /projects/hack-your-headphones/make
 

docs/projects/hack-your-headphones/code.md

@@ -1,4 +1,4 @@
-# hack your headphones - music of light
+# Code
 
 ### ~avatar avatar
 

docs/projects/hack-your-headphones/make.md

@@ -1,4 +1,4 @@
-# hack your headphones - making
+# Make
 
 ### ~avatar avatar
 
@@ -46,7 +46,7 @@ Using the 2nd crocodile clip, connect the second end of the crocodile clip onto
 
 You hacked your headphones!
 
-### ~button /projects/hack-your-headphones/music-of-light
+### ~button /projects/hack-your-headphones/code
 
 NEXT: music of light
 

docs/projects/inchworm.md

@@ -1,7 +1,7 @@
 
 # Inchworm
 
-### @description A inchworm like robot built with the micro:bit
+### @description A inchworm like robot built with the @boardname@
 
 ### ~avatar avatar
 
@@ -27,13 +27,17 @@ https://youtu.be/BiZLjugXMbM
 
 ![Materials](/static/mb/projects/inchworm/materials.jpg)
 
+## Preparation
+
+* [Equip the microservo with crocodile clips](/device/servo)
+
 ## Activities
 
-* [Servo](/projects/inchworm/servo)  
-* [Chassis](/projects/inchworm/chassis)  
+* [Make](/projects/inchworm/make)  
 * [Code](/projects/inchworm/code)  
+* [Connect](/projects/inchworm/connect)  
 
-### ~button /projects/inchworm/servo
+### ~button /projects/inchworm/make
 
 Let's get started!
 

docs/projects/inchworm/code.md

@@ -30,23 +30,6 @@ so that the inchworm goes as fast as possible. Trying it on carpet also great he
 
 ### ~
 
-## Step 2: radio controlled inchworm
-
-You will need 2 @boardname@ for this part. By using the radio, we can make the inchworm controlled by another @boardname@.
-Download the code below to the @boardname@ on the inchworm and another "controller" @boardname@. Whenere A is pressed, the inchworm will move once.
-
-```blocks
-radio.onDataPacketReceived(({receivedNumber}) => {
-    pins.servoWritePin(AnalogPin.P0, 0)
-    basic.pause(500)
-    pins.servoWritePin(AnalogPin.P0, 180)
-    basic.pause(500)
-})
-input.onButtonPressed(Button.A, () => {
-    radio.sendNumber(0)
-})
-```
-
-```package
-radio
-```
+### ~button /projects/inchworm/connect
+NEXT: Connect
+### ~

docs/projects/inchworm/connect.md

@@ -0,0 +1,28 @@
+# Connect
+
+### ~avatar avatar
+
+Remote control your inchworm with another @boardname@
+
+### ~
+
+## Duration: ~30 minutes
+
+You will need 2 @boardname@ for this part. By using the radio, we can make the inchworm controlled by another @boardname@.
+Download the code below to the @boardname@ on the inchworm and another "controller" @boardname@. Whenere A is pressed, the inchworm will move once.
+
+```blocks
+radio.onDataPacketReceived(({receivedNumber}) => {
+    pins.servoWritePin(AnalogPin.P0, 0)
+    basic.pause(500)
+    pins.servoWritePin(AnalogPin.P0, 180)
+    basic.pause(500)
+})
+input.onButtonPressed(Button.A, () => {
+    radio.sendNumber(0)
+})
+```
+
+```package
+radio
+```

docs/projects/inchworm/make.md

@@ -1,4 +1,4 @@
-# Chassis
+# Make
 ### @description Building the cardboard inchworm
 
 ### ~avatar avatar

docs/projects/telegraph.md

@@ -17,8 +17,8 @@ Build a telegraph between two @boardname@s to communicate with your friends!
 
 ## Activities
 
-* [Making the circuit](/projects/telegraph/make)  
-* [Manual telegraph](/projects/telegraph/manual-telegraph)
+* [Make](/projects/telegraph/make)  
+* [Code](/projects/telegraph/code)
 
 ### ~button /projects/telegraph/make
 Let's get started!

docs/projects/telegraph/code.md

@@ -1,4 +1,4 @@
-# telegraph - manual telegraph 
+# Code 
 
 Let's build the code that will send a impulse while the user presses ``A``.
 

docs/projects/telegraph/make.md

@@ -1,4 +1,4 @@
-# telegraph - making 
+# Make
 
 ### ~avatar
 
@@ -68,8 +68,8 @@ Using the 4th crocodile clip, connect the unattached end of the crocodile clip o
 ![](/static/mb/lessons/telegraph-0.png)
 
 
-### ~button /projects/telegraph/manual-telegraph
+### ~button /projects/telegraph/code
 
-NEXT: manual telegraph
+NEXT: Code
 
 ### ~

docs/projects/wallet/code.md

@@ -1,4 +1,4 @@
-# Wallet - Code
+# Code
 
 ## Simple animation
 

docs/projects/wallet/make.md

@@ -1,4 +1,4 @@
-# Wallet - Make
+# Make
 
 ### @description Maker Project for Wallet
 

docs/reference/bluetooth/advertise-uid-buffer.md

@@ -25,7 +25,7 @@ bluetooth.advertiseUidBuffer(pins.createBuffer(16), 7, true);
 
 * ``buffer`` - a 16 bytes buffer containing the namespace (first 10 bytes) and instance (last 6 bytes).
 * ``power`` - a [number](/reference/types/number) representing the power level between 0 (short) and 7 (maximum range).
-* ``connectable`` - a [boolean](/blocks/logic/boolean) indicating whether or not the micro:bit should accept connections. 
+* ``connectable`` - a [boolean](/blocks/logic/boolean) indicating whether or not the @boardname@ should accept connections. 
 
 
 ## See Also

docs/reference/bluetooth/advertise-uid.md

@@ -26,7 +26,7 @@ bluetooth.advertiseUid(42, 1, 7, true);
 * ``namespace`` last 4 bytes of the namespace uid (6 to 9)
 * ``instance`` last 4 bytes of the instance (2 to 5)
 * ``power`` - a [number](/reference/types/number) representing the power level between 0 (short) and 7 (maximum range).
-* ``connectable`` - a [boolean](/blocks/logic/boolean) indicating whether or not the micro:bit should accept connections. 
+* ``connectable`` - a [boolean](/blocks/logic/boolean) indicating whether or not the @boardname@ should accept connections. 
 
 ## Encoding
 

docs/reference/bluetooth/advertise-url.md

@@ -25,7 +25,7 @@ bluetooth.advertiseUrl("https://pxt.microbit.org/", 7, true);
 
 * ``url`` - a [string](/reference/types/string) containing the URL to broadcast, at most 17 characters long, excluding the protocol (eg: ``https://``) which gets encoded as 1 byte.
 * ``power`` - a [number](/reference/types/number) representing the power level between 0 (short) and 7 (maximum range).
-* ``connectable`` - a [boolean](/blocks/logic/boolean) indicating whether or not the micro:bit should accept connections. 
+* ``connectable`` - a [boolean](/blocks/logic/boolean) indicating whether or not the @boardname@ should accept connections. 
 
 ### Example: Broadcast a secret code
 

docs/reference/pins/set-events.md

@@ -0,0 +1,30 @@
+# Set Events
+
+Configure the type of events emitted by a given pin.
+
+```sig
+pins.setEvents(DigitalPin.P0, PinEventType.Edge);
+```
+
+### Parameters
+
+* ``name``: The @boardname@ hardware pin to configure (``P0`` through ``P20``)
+* ``type``: The type of events this pin should emit
+
+### Example
+
+The following example configures pin ``P0`` and then
+subscribes to the rise and fall events.
+
+```blocks
+control.onEvent(control.eventSourceId(EventBusSource.MICROBIT_ID_IO_P0),  control.eventValueId(EventBusValue.MICROBIT_PIN_EVT_RISE), () => {
+    basic.showString("Rise")
+})
+control.onEvent(control.eventSourceId(EventBusSource.MICROBIT_ID_IO_P0),  control.eventValueId(EventBusValue.MICROBIT_PIN_EVT_FALL), () => {
+    basic.showString("Fall")
+})
+pins.setEvents(DigitalPin.P0, PinEventType.Edge)
+```
+
+**This is an advanced API.**  For more information, see the
+[@boardname@ runtime messageBus documentation](https://lancaster-university.github.io/microbit-docs/ubit/messageBus/)

docs/reference/radio/on-data-packet-received.md

@@ -21,7 +21,7 @@ To add or remove the parts of the packet from the block, try clicking the blue g
   * `receivedString` - The [string](/reference/types/string) that was sent in this packet or the empty string if this packet did not contain a string. See [send string](/reference/radio/send-string) and [send value](/reference/radio/send-value)
   * `time` - The system time of the @boardname@ that sent this packet at the time the packet was sent.
   * `serial` - The serial number of the @boardname@ that sent this packet or `0` if the @boardname@ did not include its serial number.
-  * `signal` - How strong the radio signal is from `255` (weak) to `0` (strong).
+  * `signal` - How strong the radio signal is from `-128` (weak) to `-42` (strong).
 
 ### Example
 
@@ -39,6 +39,23 @@ radio.onDataPacketReceived(({ receivedNumber }) => {
 })
 ```
 
+### Example
+
+This program uses the signal strength from received packets to graph the
+approximate distance between two @boardname@s.
+
+```blocks
+basic.forever(() => {
+    radio.sendNumber(0)
+})
+radio.onDataPacketReceived(({ signal, receivedNumber }) => {
+    led.plotBarGraph(
+        Math.abs(signal + 42),
+        128 - 42
+    )
+})
+```
+
 ### See also
 
 [send number](/reference/radio/send-number),

docs/reference/radio/received-signal-strength.md

@@ -2,8 +2,8 @@
 
 > Note: This API has been deprecated! Use [on data packet received](/reference/radio/on-data-packet-received) instead.
 
-Find how strong the ``radio`` signal is, from `255` to `0`.
-(`255` means a weak signal and `0` means a strong one.)
+Find how strong the ``radio`` signal is, from `-128` to `-42`.
+(`-128` means a weak signal and `-42` means a strong one.)
 
 The @boardname@ finds the signal strength by checking how strong it was
 the last time it ran the
@@ -16,7 +16,7 @@ radio.receivedSignalStrength();
 
 ### Returns
 
-* a [number](/reference/types/number) between `255` and `0` that means
+* a [number](/reference/types/number) between `-128` and `-42` that means
 how strong the signal is.
 
 ### Simulator

docs/static/logo.square.black.svg

@@ -11,8 +11,7 @@
    aria-labelledby="title  desc"
    xml:space="preserve"
    enable-background="new 0 0 280 32.755"
-   height="52.672001"
-   width="52.672001"
+   viewBox="0 0 52.672001 52.672001"
    version="1.1"
    id="svg2"
    inkscape:version="0.91 r13725"

docs/static/logo.square.white.svg

@@ -11,8 +11,7 @@
    aria-labelledby="title  desc"
    xml:space="preserve"
    enable-background="new 0 0 280 32.755"
-   height="52.672001"
-   width="52.672001"
+   viewBox="0 0 52.672001 52.672001"
    version="1.1"
    id="svg2"
    inkscape:version="0.91 r13725"

docs/tutorials/getting-started.md

@@ -31,6 +31,7 @@ and press **A** to scroll your text.
 ### Step 5
 
 Place more blocks to display a smiley when button **B** is pressed.
+Use the dropdown to find ``B``!
 
 ```block
 input.onButtonPressed(Button.B, () => {
@@ -59,3 +60,15 @@ input.onGesture(Gesture.Shake, () => {
     `)
 })
 ```
+
+### Step 7
+
+Drag more blocks to display a random number when pin ``P0`` is touched.
+Hold your right thumb on the ``GND`` metal pin 
+at press the ``0`` pin with your right hand to trigger this event.
+
+```block
+input.onPinPressed(TouchPin.P0, () => {
+    basic.showNumber(Math.random(7))
+})
+```

electron/release.json

@@ -1,9 +1,9 @@
 {
     "versions": {
         "0": {
-            "latest": "v0.6.45",
+            "latest": "v0.7.41",
             "banned": [],
-            "prompt": "v0.0.0"
+            "prompt": "v0.7.41"
         }
     }
 }

libs/blocksprj/main.blocks

@@ -1,3 +1,4 @@
 <xml xmlns="http://www.w3.org/1999/xhtml">
   <block type="pxt-on-start"></block>
+  <block type="device_forever"></block>
 </xml>

libs/bluetooth/_locales/de/bluetooth-jsdoc-strings.json

@@ -1,4 +1,5 @@
 {
+  "bluetooth.onBluetoothConnected|param|body": "Code, der ausgeführt wird, wenn eine Bluetooth-Verbindung aufgebaut wurde",
   "bluetooth.uartWriteNumber": "Gibt einen numerischen Wert an die serielle",
   "bluetooth.uartWriteValue": "Schreibt ein ``Namen: Wert`` Wertepaar auf die serielle Schnittstelle.",
   "bluetooth.uartWriteValue|param|name": "Name des Wertestreams, z.B.: x",

libs/bluetooth/_locales/no/bluetooth-strings.json

@@ -0,0 +1,21 @@
+{
+  "bluetooth.advertiseUid|block": "bluetooth kringkast UID|namespace (bytes 6-9)%ns|instance (bytes 2-6)%instance|med sendereffekt %power|kan tilkobles %connectable",
+  "bluetooth.advertiseUrl|block": "bluetooth kringkast url %url|med sendereffekt %power|kan tilkobles %connectable",
+  "bluetooth.onBluetoothConnected|block": "når bluetooth tilkobles",
+  "bluetooth.onBluetoothDisconnected|block": "når bluetooth frakobles",
+  "bluetooth.setTransmitPower|block": "bluetooth sett sendereffekt %power",
+  "bluetooth.startAccelerometerService|block": "bluetooth akselerometer-tjeneste",
+  "bluetooth.startButtonService|block": "bluetooth trykknapp-tjeneste",
+  "bluetooth.startIOPinService|block": "bluetooth digital tilkobling-tjeneste",
+  "bluetooth.startLEDService|block": "bluetooth LED-tjeneste",
+  "bluetooth.startMagnetometerService|block": "bluetooth magnetometer-tjeneste",
+  "bluetooth.startTemperatureService|block": "bluetooth temperatur-tjeneste",
+  "bluetooth.startUartService|block": "bluetooth serieport-tjeneste (UART)",
+  "bluetooth.stopAdvertising|block": "bluetooth stopp kringkasting",
+  "bluetooth.uartReadUntil|block": "bluetooth serieport|les frem til %del=serial_delimiter_conv",
+  "bluetooth.uartWriteNumber|block": "bluetooth serieport|skriv tall %value",
+  "bluetooth.uartWriteString|block": "bluetooth serieport|skriv tekst %data",
+  "bluetooth.uartWriteValue|block": "bluetooth serieport|skriv verdi %name|= %value",
+  "bluetooth|block": "bluetooth",
+  "{id:category}Bluetooth": "Bluetooth"
+}

libs/bluetooth/pxt.json

@@ -7,7 +7,8 @@
         "shims.d.ts",
         "bluetooth.ts",
         "bluetooth.cpp",
-        "_locales/de/bluetooth-jsdoc-strings.json"
+        "_locales/de/bluetooth-jsdoc-strings.json",
+        "_locales/no/bluetooth-strings.json"
     ],
     "public": true,
     "dependencies": {

libs/core/_locales/core-jsdoc-strings.json

@@ -36,6 +36,7 @@
   "basic.showAnimation": "Shows a sequence of LED screens as an animation.",
   "basic.showAnimation|param|interval": "time in milliseconds between each redraw",
   "basic.showAnimation|param|leds": "pattern of LEDs to turn on/off",
+  "basic.showIcon": "Draws the selected icon on the LED screen",
   "basic.showLeds": "Draws an image on the LED screen.",
   "basic.showLeds|param|interval": "time in milliseconds to pause after drawing",
   "basic.showLeds|param|leds": "the pattern of LED to turn on/off",
@@ -223,6 +224,9 @@
   "pins.servoWritePin": "Writes a value to the servo, controlling the shaft accordingly. On a standard servo, this will set the angle of the shaft (in degrees), moving the shaft to that orientation. On a continuous rotation servo, this will set the speed of the servo (with ``0`` being full-speed in one direction, ``180`` being full speed in the other, and a value near ``90`` being no movement).",
   "pins.servoWritePin|param|name": "pin to write to, eg: AnalogPin.P0",
   "pins.servoWritePin|param|value": "angle or rotation speed, eg:180,90,0",
+  "pins.setEvents": "Configures the events emitted by this pin. Events can be subscribed to\nusing ``control.onEvent()``.",
+  "pins.setEvents|param|name": "pin to set the event mode on, eg: DigitalPin.P0",
+  "pins.setEvents|param|type": "the type of events for this pin to emit, eg: PinEventType.Edge",
   "pins.setPull": "Configures the pull of this pin.",
   "pins.setPull|param|name": "pin to set the pull mode on, eg: DigitalPin.P0",
   "pins.setPull|param|pull": "one of the mbed pull configurations, eg: PinPullMode.PullUp",

libs/core/_locales/core-strings.json

@@ -7,6 +7,19 @@
   "AcceleratorRange.OneG|block": "1g",
   "AcceleratorRange.TwoG": "The accelerator measures forces up to 2 gravity",
   "AcceleratorRange.TwoG|block": "2g",
+  "AnalogPin.P11|block": "P11 (write only)",
+  "AnalogPin.P12|block": "P12 (write only)",
+  "AnalogPin.P13|block": "P13 (write only)",
+  "AnalogPin.P14|block": "P14 (write only)",
+  "AnalogPin.P15|block": "P15 (write only)",
+  "AnalogPin.P16|block": "P16 (write only)",
+  "AnalogPin.P19|block": "P19 (write only)",
+  "AnalogPin.P20|block": "P20 (write only)",
+  "AnalogPin.P5|block": "P5 (write only)",
+  "AnalogPin.P6|block": "P6 (write only)",
+  "AnalogPin.P7|block": "P5 (write only)",
+  "AnalogPin.P8|block": "P8 (write only)",
+  "AnalogPin.P9|block": "P9 (write only)",
   "BaudRate.BaudRate115200|block": "115200",
   "BaudRate.BaudRate9600|block": "9600",
   "BeatFraction.Breve|block": "4",
@@ -55,6 +68,46 @@
   "Gesture.TiltLeft|block": "tilt left",
   "Gesture.TiltRight": "Raised when the screen is pointing right",
   "Gesture.TiltRight|block": "tilt right",
+  "IconNames.Angry|block": "angry",
+  "IconNames.Asleep|block": "asleep",
+  "IconNames.Butterfly|block": "butterfly",
+  "IconNames.Chessboard|block": "chess board",
+  "IconNames.Confused|block": "confused",
+  "IconNames.Cow|block": "cow",
+  "IconNames.Diamond|block": "diamond",
+  "IconNames.Duck|block": "duck",
+  "IconNames.EigthNote|block": "eigth note",
+  "IconNames.Fabulous|block": "fabulous",
+  "IconNames.Ghost|block": "ghost",
+  "IconNames.Giraffe|block": "giraffe",
+  "IconNames.Happy|block": "happy",
+  "IconNames.Heart|block": "heart",
+  "IconNames.House|block": "house",
+  "IconNames.LeftTriangle|block": "left triangle",
+  "IconNames.Meh|block": "meh",
+  "IconNames.No|block": "no",
+  "IconNames.Pacman|block": "pac man",
+  "IconNames.Pitchfork|block": "pitchfork",
+  "IconNames.QuarterNote|block": "quarter note",
+  "IconNames.Rabbit|block": "rabbit",
+  "IconNames.Rollerskate|block": "roller skate",
+  "IconNames.Sad|block": "sad",
+  "IconNames.Silly|block": "silly",
+  "IconNames.Skull|block": "skull",
+  "IconNames.SmallDiamond|block": "small diamond",
+  "IconNames.SmallHeart|block": "small heart",
+  "IconNames.SmallSquare|block": "small square",
+  "IconNames.Snake|block": "snake",
+  "IconNames.Square|block": "square",
+  "IconNames.StickFigure|block": "stick figure",
+  "IconNames.Surprised|block": "surprised",
+  "IconNames.Sword|block": "sword",
+  "IconNames.TShirt|block": "t-shirt",
+  "IconNames.Target|block": "target",
+  "IconNames.Tortoise|block": "tortoise",
+  "IconNames.Triangle|block": "triangle",
+  "IconNames.Umbrella|block": "umbrella",
+  "IconNames.Yes|block": "yes",
   "LedSpriteProperty.Blink|block": "blink",
   "LedSpriteProperty.Brightness|block": "brightness",
   "LedSpriteProperty.Direction|block": "direction",
@@ -74,6 +127,10 @@
   "Note.GSharp4|block": "G#4",
   "Note.GSharp5|block": "G#5",
   "Note.GSharp|block": "G#",
+  "PinEventType.Edge|block": "edge",
+  "PinEventType.None|block": "none",
+  "PinEventType.Pulse|block": "pulse",
+  "PinEventType.Touch|block": "touch",
   "PinPullMode.PullDown|block": "down",
   "PinPullMode.PullNone|block": "none",
   "PinPullMode.PullUp|block": "up",
@@ -81,17 +138,16 @@
   "PulseValue.Low|block": "low",
   "Rotation.Pitch|block": "pitch",
   "Rotation.Roll|block": "roll",
-  "String.charAt|block": "char from %this|at %pos",
-  "String.compare|block": "compare %this| to %that",
-  "String.concat|block": "join %this|%other",
+  "String.charAt|block": "char from %this=text|at %pos",
+  "String.compare|block": "compare %this=text| to %that",
   "String.fromCharCode|block": "text from char code %code",
-  "String.isEmpty|block": "%this| is empty",
   "String.length|block": "length of %VALUE",
-  "String.substr|block": "substring of %this|from %start|of length %length",
+  "String.substr|block": "substring of %this=text|from %start|of length %length",
   "String|block": "String",
   "basic.clearScreen|block": "clear screen",
   "basic.forever|block": "forever",
   "basic.pause|block": "pause (ms) %pause",
+  "basic.showIcon|block": "show icon %i",
   "basic.showLeds|block": "show leds",
   "basic.showNumber|block": "show|number %number",
   "basic.showString|block": "show|string %text",
@@ -167,6 +223,7 @@
   "pins.pulseIn|block": "pulse in (µs)|pin %name|pulsed %value",
   "pins.servoSetPulse|block": "servo set pulse|pin %value|to (µs) %micros",
   "pins.servoWritePin|block": "servo write|pin %name|to %value",
+  "pins.setEvents|block": "set pin %pin|to emit %type|events",
   "pins.setPull|block": "set pull|pin %pin|to %pull",
   "pins.spiWrite|block": "spi write %value",
   "pins|block": "pins",

libs/core/_locales/de/core-jsdoc-strings.json

@@ -47,6 +47,7 @@
   "control": "Laufzeit- und Event-Dienstprogramme.",
   "control.assert": "Wenn die Bedingung falsch ist, zeige eine Nachricht auf der seriellen Konsole und gebe Panic-Code 098 aus",
   "control.deviceName": "Erzeugt einen Namen für das Gerät, basierend auf der Seriennummer",
+  "control.deviceSerialNumber": "Leite eine einzigartige, einheitliche Seriennummer dieses Gerätes aus den internen Daten ab.",
   "control.eventSourceId": "Gibt den Wert einer C++-Laufzeitkonstanten aus",
   "control.eventTimestamp": "Holt den Zeitstempel des letzten Events auf dem Bus",
   "control.eventValue": "Holt den Wert des letzten ausgeführten Events auf dem Bus",
@@ -186,7 +187,6 @@
   "pins.spiWrite|param|value": "Daten, die an den SPI-Slave geschickt werden sollen",
   "serial": "Lesen und Schreiben von Daten über eine serielle Verbindung.",
   "serial.delimiters": "Gibt die mit dem Begrenzer korrespondierende Zeichenfolge aus.",
-  "serial.onLineReceived": "Registriert ein Event, das ausgeführt wird, wenn eine Zeile empfangen wurde",
   "serial.readLine": "Liest eine Textzeile aus der seriellen Schnittstelle.",
   "serial.readUntil": "Liest aus eine Textzeile aus dem seriellen Anschluss und gibt den Puffer aus, wenn die Begrenzung erreicht wurde.",
   "serial.readUntil|param|delimiter": "Text-Begrenzung, die die Textblöcke voneinander trennt",

libs/core/_locales/de/core-strings.json

@@ -7,7 +7,7 @@
   "AcceleratorRange.OneG|block": "1g",
   "AcceleratorRange.TwoG": "Der Bewegungssensor misst Kräfte bis 2g",
   "AcceleratorRange.TwoG|block": "2g",
-  "BaudRate.BaudRate115200|block": "11520",
+  "BaudRate.BaudRate115200|block": "115200",
   "BaudRate.BaudRate9600|block": "9600",
   "BeatFraction.Eighth|block": "1/8",
   "BeatFraction.Half|block": "1/2",
@@ -72,13 +72,8 @@
   "PinPullMode.PullUp|block": "nach oben",
   "Rotation.Pitch|block": "Winkel",
   "Rotation.Roll|block": "rollen",
-  "String.charAt|block": "Zeichen an Position %pos aus|%this",
-  "String.compare|block": "vergleiche %this| mit %that",
-  "String.concat|block": "hänge %this| mit %other aneinander",
   "String.fromCharCode|block": "Text aus char code %code",
-  "String.isEmpty|block": "%this| ist leer",
   "String.length|block": "Länge von %VALUE",
-  "String.substr|block": "extrahiere aus %this|beginnend mit %start|%length Zeichen",
   "String|block": "Zeichenfolge",
   "basic.clearScreen|block": "Bildschirminhalt löschen",
   "basic.forever|block": "dauerhaft",
@@ -115,6 +110,7 @@
   "input.magneticForce|block": "Magnetkraft (µT) |%NAME",
   "input.onButtonPressed|block": "wenn Knopf|%NAME|gedrückt",
   "input.onGesture|block": "wenn |%NAME",
+  "input.onPinPressed|block": "wenn Pin|%NAME|gedrückt",
   "input.onPinReleased|block": "wenn Pin %NAME|losgelassen",
   "input.pinIsPressed|block": "Pin %NAME|ist gedrückt",
   "input.rotation|block": "Rotation (°)|%NAME",
@@ -157,13 +153,13 @@
   "pins.spiWrite|block": "schreibe %value in SPI",
   "pins|block": "Pins",
   "serial.delimiters|block": "%del",
-  "serial.readLine|block": "serial|read line",
-  "serial.readUntil|block": "serial|read until %delimiter=serial_delimiter_conv",
-  "serial.redirect|block": "serial|redirect to|TX %tx|RX %rx|at baud rate %rate",
-  "serial.writeLine|block": "serial|write line %text",
-  "serial.writeNumber|block": "serial|write number %value",
-  "serial.writeString|block": "serial|write string %text",
-  "serial.writeValue|block": "serial|write value %name|= %value",
+  "serial.readLine|block": "seriell|Zeile lesen",
+  "serial.readUntil|block": "seriell|lesen bis %delimiter=serial_delimiter_conv",
+  "serial.redirect|block": "seriell|umleiten auf|TX %tx|RX %rx|mit Baudrate %rate",
+  "serial.writeLine|block": "seriell|Zeile ausgeben %text",
+  "serial.writeNumber|block": "seriell|Zahl ausgeben %value",
+  "serial.writeString|block": "seriell|Zeichenkette ausgeben %text",
+  "serial.writeValue|block": "serial|Wert ausgeben %name|= %value",
   "serial|block": "seriell",
   "{id:category}Basic": "Grundlagen",
   "{id:category}Control": "Steuerung",

libs/core/_locales/ja/core-strings.json

@@ -20,6 +20,13 @@
   "Delimiters.Dollar|block": "$",
   "Delimiters.Hash|block": "#",
   "Delimiters.NewLine|block": "改行",
+  "Dimension.X|block": "X",
+  "Dimension.Y|block": "Y",
+  "Dimension.Z|block": "Z",
+  "Direction.Left|block": "左",
+  "Direction.Right|block": "右",
+  "DisplayMode.BackAndWhite|block": "白黒",
+  "DisplayMode.Greyscale|block": "グレースケール",
   "Gesture.EightG": "8Gの衝撃があったときに発生します。",
   "Gesture.EightG|block": "8G",
   "Gesture.FreeFall": "ボードを落としたときに発生します。",
@@ -42,9 +49,60 @@
   "Gesture.TiltLeft|block": "左に傾けた",
   "Gesture.TiltRight": "画面を右に傾けたときに発生します。",
   "Gesture.TiltRight|block": "右に傾けた",
+  "IconNames.Angry|block": "おこり顔",
+  "IconNames.Asleep|block": "ねてる顔",
+  "IconNames.Butterfly|block": "ちょうちょ",
+  "IconNames.Chessboard|block": "チェス盤",
+  "IconNames.Confused|block": "こまり顔",
+  "IconNames.Cow|block": "うし",
+  "IconNames.Diamond|block": "ダイアモンド",
+  "IconNames.Duck|block": "あひる",
+  "IconNames.EigthNote|block": "8分音符",
+  "IconNames.Ghost|block": "おばけ",
+  "IconNames.Giraffe|block": "きりん",
+  "IconNames.Happy|block": "うれしい顔",
+  "IconNames.Heart|block": "ハート",
+  "IconNames.House|block": "家",
+  "IconNames.Pacman|block": "パックマン",
+  "IconNames.Pitchfork|block": "くまで",
+  "IconNames.QuarterNote|block": "4分音符",
+  "IconNames.Rabbit|block": "うさぎ",
+  "IconNames.Rollerskate|block": "ローラースケート",
+  "IconNames.Sad|block": "かなしい顔",
+  "IconNames.Silly|block": "へん顔",
+  "IconNames.Skull|block": "がいこつ",
+  "IconNames.SmallDiamond|block": "小さいダイアモンド",
+  "IconNames.SmallHeart|block": "小さいハート",
+  "IconNames.SmallSquare|block": "小さいしかく",
+  "IconNames.Snake|block": "へび",
+  "IconNames.Square|block": "しかく",
+  "IconNames.Surprised|block": "びっくり顔",
+  "IconNames.TShirt|block": "Tシャツ",
+  "IconNames.Target|block": "まと",
+  "IconNames.Tortoise|block": "かめ",
+  "IconNames.Triangle|block": "さんかく",
+  "IconNames.Umbrella|block": "かさ",
+  "LedSpriteProperty.Blink|block": "点滅",
   "LedSpriteProperty.Brightness|block": "明るさ",
+  "LedSpriteProperty.Direction|block": "方向",
+  "LedSpriteProperty.X|block": "X",
+  "LedSpriteProperty.Y|block": "Y",
   "Math.randomBoolean|block": "真または偽をランダムに選ぶ",
   "Math|block": "計算",
+  "Note.CSharp3|block": "C#3",
+  "Note.CSharp4|block": "C#4",
+  "Note.CSharp5|block": "C#5",
+  "Note.CSharp|block": "C#",
+  "Note.FSharp3|block": "F#3",
+  "Note.FSharp4|block": "F#4",
+  "Note.FSharp5|block": "F#5",
+  "Note.FSharp|block": "F#",
+  "Note.GSharp3|block": "G#3",
+  "Note.GSharp4|block": "G#4",
+  "Note.GSharp5|block": "G#5",
+  "Note.GSharp|block": "G#",
+  "PinPullMode.PullDown|block": "プルダウン",
+  "PinPullMode.PullUp|block": "プルアップ",
   "String.fromCharCode|block": "文字コード %code|の文字",
   "basic.clearScreen|block": "表示を消す",
   "basic.forever|block": "ずっと",
@@ -55,6 +113,7 @@
   "basic|block": "基本",
   "control.inBackground|block": "バックグラウンドで実行する",
   "control.reset|block": "リセット",
+  "control.waitMicros|block": "ひと休み（マイクロ秒） %micros",
   "control|block": "制御",
   "game.gameOver|block": "ゲームオーバー",
   "game|block": "ゲーム",
@@ -62,6 +121,9 @@
   "images.createImage|block": "画像を作成",
   "images|block": "画像",
   "input.acceleration|block": "加速度（ミリG）|%NAME",
+  "input.compassHeading|block": "方角（°）",
+  "input.lightLevel|block": "明るさ",
+  "input.magneticForce|block": "磁力（µT）|%NAME",
   "input.onPinPressed|block": "端子 %name|がタッチされたとき",
   "input.onPinReleased|block": "端子 %NAME|がタッチされなくなったとき",
   "input.pinIsPressed|block": "端子 %NAME|がタッチされている",
@@ -72,11 +134,22 @@
   "led.brightness|block": "明るさ",
   "led.enable|block": "表示をオンまたはオフにする %on",
   "led.plot|block": "点灯|x %x|y %y",
+  "led.toggle|block": "反転|x %x|y %y",
+  "led.unplot|block": "消灯|x %x|y %y",
   "led|block": "LED",
+  "music.beat|block": "%fraction|拍",
+  "music.changeTempoBy|block": "テンポを増減する（bpm）|%value",
   "music.setTempo|block": "テンポを設定する（bpm）|%value",
   "music.tempo|block": "テンポ（bpm）",
   "music|block": "音楽",
   "{id:category}Basic": "基本",
+  "{id:category}Control": "制御",
+  "{id:category}Game": "ゲーム",
+  "{id:category}Images": "画像",
+  "{id:category}Input": "入力",
   "{id:category}Led": "LED",
-  "{id:category}Math": "計算"
+  "{id:category}Math": "計算",
+  "{id:category}Music": "音楽",
+  "{id:category}Pins": "入出力端子",
+  "{id:category}Serial": "シリアル通信"
 }

libs/core/_locales/no/core-jsdoc-strings.json

@@ -5,5 +5,45 @@
   "Math.randomBoolean": "Gir en tilfeldig logisk verdi, \"sann\" eller \"usann\".",
   "String.fromCharCode": "Lag en tekst som består av tegnet med den angitte ASCII-koden.",
   "basic": "Blokker for grunnleggende mikro:bit-funksjonalitet.",
-  "basic.clearScreen": "Slå av alle lysene på skjermen"
+  "basic.clearScreen": "Slå av alle lysene på skjermen",
+  "basic.forever": "Gjentar denne koden hele tiden, i bakgrunnen. Lar annen kode kjøre etter hver gjentakelse.",
+  "basic.pause": "Gjør at programmet venter en angitt tid, i millisekunder",
+  "basic.pause|param|ms": "hvor lenge pausen skal vare, f.eks: 100, 200, 500, 1000, 2000",
+  "basic.plotLeds": "Tegner et bilde på skjermen.",
+  "basic.plotLeds|param|leds": "mønster av lysdioder som er på",
+  "basic.showAnimation": "Viser en sekvens av bilder som en animasjon.",
+  "basic.showAnimation|param|interval": "tid i millisekunder mellom hver gang skjermbildet tegnes",
+  "basic.showAnimation|param|leds": "mønster av lysdioder som er på",
+  "basic.showLeds": "Tegner et bilde på skjermen.",
+  "basic.showLeds|param|interval": "pause i millisekunder etter visning",
+  "basic.showLeds|param|leds": "mønsteret som skal vises med lysdiodene",
+  "basic.showNumber": "Vis et tall, rullende over skjermen. Hvis tallet får plass på skjermen (dvs. er ett enkelt siffer), ruller det ikke.",
+  "basic.showNumber|param|interval": "farten til det som ruller over skjermen; f.eks: 150, 100, 200, -100",
+  "basic.showString": "Vis en tekst rullende over skjermen. Hvis strengen har bare ett tegn ruller den ikke.",
+  "basic.showString|param|interval": "hvor fort teksten skal rulle, f.eks: 150, 100, 200, -100",
+  "basic.showString|param|text": "teksten som ruller over skjermen, f.eks: \"Hallo!\"",
+  "control": "Styrer programkjøring og hendelser.",
+  "control.inBackground": "Setter opp kode som skal kjøre i bakgrunnen.",
+  "control.reset": "Tilbakestiller micro:bit.",
+  "game": "En spillmotor for brikker (bevegelige lyspunkter)",
+  "game.addScore": "Øker poengsum med et antall poeng",
+  "game.addScore|param|points": "endring i antall poeng, f.eks. 1",
+  "game.gameOver": "Animasjon som viser at spillet er slutt.",
+  "game.score": "Gir nåværende poengsum",
+  "game.setScore": "Setter poengsum til en verdi, f.eks. 0",
+  "game.startCountdown": "Starter en nedtellingsklokke",
+  "game.startCountdown|param|ms": "nedtellingens varighet i millisekunder, f.eks. 10000",
+  "images": "Oppretting, behandling og visning av bilder på skjermen.",
+  "images.createBigImage": "Lager et bredt bilde som kan rulles over skjermen.",
+  "images.createImage": "Lager et bilde.",
+  "input": "Hendelser og data fra sensorer",
+  "input.rotation": "Helningsvinkel til micro:bit: Rotasjon om x-aksen (høyre/venstre) og y-aksen (forover/bakover), i grader.",
+  "input.runningTime": "Gir antall millisekunder siden strømmen ble slått på.",
+  "input.setAccelerometerRange": "Angir måleområde og følsomhet for akselerometeret.",
+  "input.setAccelerometerRange|param|range": "tallet angir den største akselerasjonen som måles",
+  "input.temperature": "Gir temperaturen i grader celsius.",
+  "led": "Styring av skjermen.",
+  "led.brightness": "Gir skjermens lysstyrke fra 0 (av) til 255 (full styrke).",
+  "led.fadeIn": "Tenner skjermen gradvis.",
+  "led.fadeOut": "Slukker skjermen gradvis."
 }

libs/core/_locales/no/core-strings.json

@@ -1,3 +1,197 @@
 {
-  "serial|block": "føljetong"
+  "AcceleratorRange.EightG": "Akselerometerets måleområde er opp til 8 ganger tyngekraften",
+  "AcceleratorRange.EightG|block": "8 G",
+  "AcceleratorRange.FourG": "Akselerometerets måleområde er opp til 4 ganger tyngekraften",
+  "AcceleratorRange.FourG|block": "4 g",
+  "AcceleratorRange.OneG": "Akselerometerets måleområde er opp til 1 ganger tyngekraften",
+  "AcceleratorRange.OneG|block": "1 g",
+  "AcceleratorRange.TwoG": "Akselerometerets måleområde er opp til 2 ganger tyngekraften",
+  "AcceleratorRange.TwoG|block": "2 g",
+  "BaudRate.BaudRate115200|block": "115200",
+  "BaudRate.BaudRate9600|block": "9600",
+  "BeatFraction.Breve|block": "4",
+  "BeatFraction.Double|block": "2",
+  "BeatFraction.Eighth|block": "1/8",
+  "BeatFraction.Half|block": "1/2",
+  "BeatFraction.Quarter|block": "1/4",
+  "BeatFraction.Sixteenth|block": "1/16",
+  "BeatFraction.Whole|block": "1",
+  "Button.AB|block": "A+B",
+  "Delimiters.Colon|block": ":",
+  "Delimiters.Comma|block": ",",
+  "Delimiters.Dollar|block": "$",
+  "Delimiters.Fullstop|block": ".",
+  "Delimiters.Hash|block": "#",
+  "Delimiters.NewLine|block": "linjeskift",
+  "Dimension.Strength|block": "styrke",
+  "Dimension.X|block": "x",
+  "Dimension.Y|block": "y",
+  "Dimension.Z|block": "z",
+  "Direction.Left|block": "venstre",
+  "Direction.Right|block": "høyre",
+  "DisplayMode.BackAndWhite|block": "svart og hvitt",
+  "DisplayMode.Greyscale|block": "gråtone",
+  "Gesture.EightG": "Hendelse når et støt på over 8G detekteres",
+  "Gesture.EightG|block": "8 G",
+  "Gesture.FreeFall": "Hendelse når micro:bit faller!",
+  "Gesture.FreeFall|block": "fritt fall",
+  "Gesture.LogoDown": "Hendelse når logoen er ned og skjermen er vertikal",
+  "Gesture.LogoDown|block": "logo ned",
+  "Gesture.LogoUp": "Hendelse når logoen er opp og skjermen er vertikal",
+  "Gesture.LogoUp|block": "logo opp",
+  "Gesture.ScreenDown": "Hendelse når micro:bit ligger flatt med skjermen opp",
+  "Gesture.ScreenDown|block": "skjerm ned",
+  "Gesture.ScreenUp": "Hendelse når micro:bit ligger flatt med skjermen ned",
+  "Gesture.ScreenUp|block": "skjerm opp",
+  "Gesture.Shake": "Hendelse når micro:bit ristes",
+  "Gesture.Shake|block": "ristes",
+  "Gesture.SixG": "Hendelse når et støt sterkere enn 6G detekteres",
+  "Gesture.SixG|block": "6G",
+  "Gesture.ThreeG": "Hendelse når et støt sterkere enn 3G detekteres",
+  "Gesture.ThreeG|block": "3G",
+  "Gesture.TiltLeft": "Hendelse når skjermen vender mot venstre",
+  "Gesture.TiltLeft|block": "helning venstre",
+  "Gesture.TiltRight": "Hendelse når skjermen vender mot høyre",
+  "Gesture.TiltRight|block": "helning høyre",
+  "IconNames.Angry|block": "sint",
+  "IconNames.Asleep|block": "sover",
+  "IconNames.Butterfly|block": "sommerfugl",
+  "IconNames.Chessboard|block": "sjakkbrett",
+  "IconNames.Confused|block": "forvirret",
+  "IconNames.Cow|block": "ku",
+  "IconNames.Diamond|block": "diamant",
+  "IconNames.Duck|block": "and",
+  "IconNames.EigthNote|block": "8-dels note",
+  "IconNames.Fabulous|block": "fantastisk",
+  "IconNames.Ghost|block": "spøkelse",
+  "IconNames.Giraffe|block": "giraff",
+  "IconNames.Happy|block": "glad",
+  "IconNames.Heart|block": "hjerte",
+  "IconNames.House|block": "hus",
+  "IconNames.LeftTriangle|block": "triangel venstre",
+  "IconNames.Meh|block": "meh",
+  "IconNames.No|block": "nei",
+  "IconNames.Pacman|block": "pac man",
+  "IconNames.Pitchfork|block": "gaffel",
+  "IconNames.QuarterNote|block": "4-dels note",
+  "IconNames.Rabbit|block": "kanin",
+  "IconNames.Rollerskate|block": "rulleskøyte",
+  "IconNames.Sad|block": "trist",
+  "IconNames.Silly|block": "tull",
+  "IconNames.Skull|block": "skalle",
+  "IconNames.SmallDiamond|block": "liten diamant",
+  "IconNames.SmallHeart|block": "lite hjerte",
+  "IconNames.SmallSquare|block": "liten firkant",
+  "IconNames.Snake|block": "slange",
+  "IconNames.Square|block": "firkant",
+  "IconNames.StickFigure|block": "strekmann",
+  "IconNames.Surprised|block": "overrasket",
+  "IconNames.Sword|block": "sverd",
+  "IconNames.TShirt|block": "t-skjorte",
+  "IconNames.Target|block": "blink",
+  "IconNames.Tortoise|block": "skilpadde",
+  "IconNames.Triangle|block": "trekant",
+  "IconNames.Umbrella|block": "paraply",
+  "IconNames.Yes|block": "ja",
+  "LedSpriteProperty.Blink|block": "blinke",
+  "LedSpriteProperty.Brightness|block": "lysstyrke",
+  "LedSpriteProperty.Direction|block": "retning",
+  "LedSpriteProperty.X|block": "x",
+  "LedSpriteProperty.Y|block": "y",
+  "Math.randomBoolean|block": "velg tilfeldig sann eller usann",
+  "Math|block": "Matematikk",
+  "Note.CSharp3|block": "C#3",
+  "Note.CSharp4|block": "C#4",
+  "Note.CSharp5|block": "C#5",
+  "Note.CSharp|block": "C#",
+  "Note.FSharp3|block": "F#3",
+  "Note.FSharp4|block": "F#4",
+  "Note.FSharp5|block": "F#5",
+  "Note.FSharp|block": "F#",
+  "Note.GSharp3|block": "G#3",
+  "Note.GSharp4|block": "G#4",
+  "Note.GSharp5|block": "G#5",
+  "Note.GSharp|block": "G#",
+  "PinEventType.Edge|block": "kant",
+  "PinEventType.None|block": "ingen",
+  "PinEventType.Pulse|block": "puls",
+  "PinEventType.Touch|block": "berøring",
+  "PinPullMode.PullDown|block": "lav",
+  "PinPullMode.PullNone|block": "ingen",
+  "PinPullMode.PullUp|block": "høy",
+  "PulseValue.High|block": "høy",
+  "PulseValue.Low|block": "lav",
+  "String.fromCharCode|block": "tekst fra tegnverdi %code",
+  "String|block": "Tekst",
+  "basic.clearScreen|block": "tøm skjermen",
+  "basic.forever|block": "gjenta for alltid",
+  "basic.pause|block": "pause (ms) %pause",
+  "basic.showIcon|block": "vis ikon %i",
+  "basic.showLeds|block": "vis bilde",
+  "basic.showNumber|block": "vis|tall %number",
+  "basic.showString|block": "vis|tekst %text",
+  "basic|block": "grunnleggende",
+  "control.inBackground|block": "kjør i bakgrunnen",
+  "control.reset|block": "tilbakestill",
+  "control.waitMicros|block": "vent (µs) %micros",
+  "control|block": "kontroll",
+  "game.addScore|block": "endre poengsum med|%points",
+  "game.gameOver|block": "game over",
+  "game.score|block": "poengsum",
+  "game.startCountdown|block": "start nedtelling|(ms) %duration",
+  "game|block": "spill",
+  "images.createBigImage|block": "lag stort bilde",
+  "images.createImage|block": "lag bilde",
+  "images|block": "bilder",
+  "input.acceleration|block": "akselerasjon (mG) |%NAME",
+  "input.buttonIsPressed|block": "knapp|%NAME|trykkes",
+  "input.compassHeading|block": "kompassretning (°)",
+  "input.lightLevel|block": "lysnivå",
+  "input.magneticForce|block": "magnetfelt (µT)|%NAME",
+  "input.onButtonPressed|block": "når knapp|%NAME|trykkes",
+  "input.onGesture|block": "når |%NAME",
+  "input.onPinPressed|block": "når kontakt %name|trykkes",
+  "input.onPinReleased|block": "når kontakt %NAME|slippes",
+  "input.pinIsPressed|block": "kontakt %NAME|trykkes",
+  "input.rotation|block": "helningsvinkel (°)|%NAME",
+  "input.runningTime|block": "kjøretid (ms)",
+  "input.setAccelerometerRange|block": "sett akselerometer|maks. %range",
+  "input.temperature|block": "temperatur (°C)",
+  "input|block": "inngang",
+  "led.brightness|block": "lysstyrke",
+  "led.plotBarGraph|block": "søylediagram av %value |opp til %high",
+  "led.plot|block": "tenn|x %x|y %y",
+  "led.point|block": "lyser i|x %x|y %y",
+  "led.setBrightness|block": "sett lysstyrke %value",
+  "led.stopAnimation|block": "stopp animasjon",
+  "led|block": "LED",
+  "music.changeTempoBy|block": "endre tempo med (bpm)|%value",
+  "music.playTone|block": "spill|tone %note=device_note|i %duration=device_beat",
+  "music.rest|block": "pause (ms) |%duration = device_beat",
+  "music.ringTone|block": "ring tone (Hz)|%note=device_note",
+  "music.setTempo|block": "sett tempo til (bpm)|%value",
+  "music|block": "musikk",
+  "pins.analogReadPin|block": "les analogverdi|fra %name",
+  "pins.analogSetPeriod|block": "analog sett periodetid|på %pin|til (µs) %micros",
+  "pins.analogWritePin|block": "skriv analog|til %name|verdi %value",
+  "pins.digitalReadPin|block": "les digitalverdi|fra %name",
+  "pins.digitalWritePin|block": "skriv digital|til %name|verdi %value",
+  "pins.i2cReadNumber|block": "I2C les tall|fra adresse %address|med format %format = i2c_sizeof",
+  "pins.i2cWriteNumber|block": "I2C skriv tall|til adresse %address|verdi % value|med format %format = i2c_sizeof",
+  "pins.map|block": "regn om %value|fra lav %fromLow|fra høy %fromHigh|til lav %toLow|til høy %toHigh",
+  "pins.onPulsed|block": "når|%pin|mottar puls %pulse",
+  "pins.pulseDuration|block": "pulslengde (µs)",
+  "pins.servoSetPulse|block": "servo skriv pulslengde|på %value|til (µs) %micros",
+  "pins.servoWritePin|block": "servo skriv|til %name|verdi %value",
+  "pins.setPull|block": "sett utilkoblet verdi|for %pin|til %pull",
+  "pins|block": "tilkoblinger",
+  "serial.readLine|block": "serieport|les linje",
+  "serial.redirect|block": "sett serieport|tilkobling|send %tx| motta %rx|med hastighet %rate",
+  "serial.writeLine|block": "serieport|skriv linje %text",
+  "serial.writeNumber|block": "serieport|skriv tall %value",
+  "serial.writeString|block": "serieport|skriv tekst %text",
+  "serial.writeValue|block": "serieport|skriv verdi %name|= %value",
+  "serial|block": "føljetong",
+  "{id:category}Math": "Matematikk",
+  "{id:category}String": "Tekst"
 }

libs/core/_locales/si-LK/core-jsdoc-strings.json

@@ -0,0 +1,6 @@
+{
+  "Math.randomBoolean": "සත්‍යය හෝ අසත්‍යය අගයන් අහඹු ලෙස ලැබෙනවා. කාසියක් උඩ දාපුවම ලැබෙන අගයන් දෙක වගේ.",
+  "String.fromCharCode": "දෙන ලද ASCII අක්ෂර කේතයෙන් වචනයක් සකසන්න.",
+  "basic": "මුලික micro:bit අංග වලට ප්‍රවේශ වීමට ඉඩ කඩ ලබා දෙයි.",
+  "basic.clearScreen": "සියලුම LEDs නිවා දමන්න"
+}

libs/core/_locales/si-LK/core-strings.json

@@ -0,0 +1,177 @@
+{
+  "AcceleratorRange.EightG": "ත්වරකය ගුරුත්වය 8ක් වන තෙක් මිනුම් ලබා ගනියි",
+  "AcceleratorRange.EightG|block": "8g",
+  "AcceleratorRange.FourG": "ත්වරකය ගුරුත්වය 4ක් වන තෙක් මිනුම් ලබා ගනියි",
+  "AcceleratorRange.FourG|block": "4g",
+  "AcceleratorRange.OneG": "ත්වරකය ගුරුත්වය 1ක් වන තෙක් මිනුම් ලබා ගනියි",
+  "AcceleratorRange.OneG|block": "1g",
+  "AcceleratorRange.TwoG": "ත්වරකය ගුරුත්වය 2ක් වන තෙක් මිනුම් ලබා ගනියි",
+  "AcceleratorRange.TwoG|block": "2g",
+  "BaudRate.BaudRate115200|block": "115200",
+  "BaudRate.BaudRate9600|block": "9600",
+  "BeatFraction.Breve|block": "4",
+  "BeatFraction.Double|block": "2",
+  "BeatFraction.Eighth|block": "1/8",
+  "BeatFraction.Half|block": "1/2",
+  "BeatFraction.Quarter|block": "1/4",
+  "BeatFraction.Sixteenth|block": "1/16",
+  "BeatFraction.Whole|block": "1",
+  "Button.AB|block": "A+B",
+  "Delimiters.Dollar|block": "$",
+  "Delimiters.Hash|block": "#",
+  "Delimiters.NewLine|block": "නව පෙළ",
+  "Dimension.Strength|block": "ප්‍රබලතාව",
+  "Dimension.X|block": "x",
+  "Dimension.Y|block": "y",
+  "Dimension.Z|block": "z",
+  "Direction.Left|block": "වම",
+  "Direction.Right|block": "දකුණ",
+  "DisplayMode.BackAndWhite|block": "කළු සහ සුදු",
+  "DisplayMode.Greyscale|block": "greyscale",
+  "EventCreationMode.CreateAndFire": "MicroBitEvent is initialised, and its event handlers are immediately fired (not suitable for use in interrupts!).",
+  "EventCreationMode.CreateOnly": "MicroBitEvent is initialised, and no further processing takes place.",
+  "Gesture.EightG": "Raised when a 8G shock is detected",
+  "Gesture.EightG|block": "8g",
+  "Gesture.FreeFall": "පුවරුව වැටෙන විට ඇති කරන්න!",
+  "Gesture.FreeFall|block": "නිදහස් වැටීම",
+  "Gesture.LogoDown": "සංකේතය යටි අතට ඇති විට සහ තිරය සිරස්ව පිහිටි විට ඇති කරන්න",
+  "Gesture.LogoDown|block": "ලාංඡනය පහළට",
+  "Gesture.LogoUp": "සංකේතය උඩු අතට ඇති විට සහ තිරය සිරස්ව පිහිටි විට ඇති කරන්න",
+  "Gesture.LogoUp|block": "ලාංඡනය ඉහලට",
+  "Gesture.ScreenDown": "තිරය ඉහලට යොමු වී ඇති විට සහ පුවරුව තිරස්ව ඇති විට ඇති කරන්න",
+  "Gesture.ScreenDown|block": "තිරය පහලට",
+  "Gesture.ScreenUp": "තිරය පහලට යොමු වී ඇති විට සහ පුවරුව තිරස්ව ඇති විට ඇති කරන්න",
+  "Gesture.ScreenUp|block": "තිරය ඉහලට",
+  "Gesture.Shake": "සෙලවුන විට ඇති කරන්න",
+  "Gesture.Shake|block": "සොලවන්න",
+  "Gesture.SixG": "6G කම්පනයක් අනාවරණය වූ විට ඇති කරන්න",
+  "Gesture.SixG|block": "6g",
+  "Gesture.ThreeG": "3G කම්පනයක් අනාවරණය වූ විට ඇති කරන්න",
+  "Gesture.ThreeG|block": "3g",
+  "Gesture.TiltLeft": "තිරය වමට යොමු වී ඇති විට ඇති කරන්න",
+  "Gesture.TiltLeft|block": "වමට ඇල කරන්න",
+  "Gesture.TiltRight": "තිරය දකුණට යොමු වී ඇති විට ඇති කරන්න",
+  "Gesture.TiltRight|block": "දකුණට ඇල කරන්න",
+  "LedSpriteProperty.Blink|block": "බබලනවා",
+  "LedSpriteProperty.Brightness|block": "දීප්තිමත් බව",
+  "LedSpriteProperty.Direction|block": "දිශාව",
+  "LedSpriteProperty.X|block": "x",
+  "LedSpriteProperty.Y|block": "y",
+  "Math.randomBoolean|block": "අහඹු ලෙස සත්‍යය හෝ අසත්‍යය තෝරන්න",
+  "Math|block": "ගණිත",
+  "Note.CSharp3|block": "C#3",
+  "Note.CSharp4|block": "C#4",
+  "Note.CSharp5|block": "C#5",
+  "Note.CSharp|block": "C#",
+  "Note.FSharp3|block": "F#3",
+  "Note.FSharp4|block": "F#4",
+  "Note.FSharp5|block": "F#5",
+  "Note.FSharp|block": "F#",
+  "Note.GSharp3|block": "G#3",
+  "Note.GSharp4|block": "G#4",
+  "Note.GSharp5|block": "G#5",
+  "Note.GSharp|block": "G#",
+  "PinEventType.Edge|block": "අයින",
+  "PinEventType.Pulse|block": "ස්පන්දන",
+  "PinEventType.Touch|block": "ස්පර්ශ",
+  "PinPullMode.PullDown|block": "පහළ",
+  "PinPullMode.PullUp|block": "ඉහල",
+  "PulseValue.High|block": "උසස්",
+  "PulseValue.Low|block": "අඩු",
+  "Rotation.Pitch|block": "pitch",
+  "Rotation.Roll|block": "roll",
+  "String.fromCharCode|block": "text from char code %code",
+  "String|block": "String",
+  "basic.clearScreen|block": "තිරය පැහැදිලි කරන්න",
+  "basic.forever|block": "සදහටම",
+  "basic.pause|block": "pause (ms) %pause",
+  "basic.showLeds|block": "led පෙන්වන්න",
+  "basic.showNumber|block": "පෙන්වන්න|අංකය %number",
+  "basic.showString|block": "show|string %text",
+  "basic|block": "මූලික",
+  "control.inBackground|block": "පසුබිම තුල ධාවනය කරන්න",
+  "control.reset|block": "යලි පිහිටුවන්න",
+  "control.waitMicros|block": "wait (µs)%micros",
+  "control|block": "පාලනය",
+  "game.addScore|block": "change score by|%points",
+  "game.gameOver|block": "ක්‍රීඩාව අවසන්",
+  "game.score|block": "ලකුණු",
+  "game.setScore|block": "ලකුණු %points සකසන්න",
+  "game.startCountdown|block": "ගණනය ආරම්භ කරන්න |(ms) %duration",
+  "game|block": "ක්‍රීඩාව",
+  "images.createBigImage|block": "පින්තූර සකසන්න",
+  "images.createImage|block": "පින්තූර සකසන්න",
+  "images|block": "පින්තූර",
+  "input.acceleration|block": "ත්වරණය (mg)|%NAME",
+  "input.buttonIsPressed|block": "බොත්තම |%NAME| එබිලද",
+  "input.compassHeading|block": "මාලිමා ශීර්ෂය (°)",
+  "input.lightLevel|block": "ආලෝක තත්වය",
+  "input.magneticForce|block": "චුම්බක බලය (µT)|%NAME",
+  "input.onButtonPressed|block": "on button|%NAME|pressed",
+  "input.onGesture|block": "on |%NAME",
+  "input.onPinPressed|block": "on pin %name|pressed",
+  "input.onPinReleased|block": "on pin %NAME|released",
+  "input.pinIsPressed|block": "pin %NAME|is pressed",
+  "input.rotation|block": "භ්‍රමනය (°)|%NAME",
+  "input.runningTime|block": "දුවන කාලය (ms)",
+  "input.setAccelerometerRange|block": "ත්වරණමානය සකසන්න |range %range",
+  "input.temperature|block": "උෂ්ණත්වය (°C)",
+  "input|block": "ආදානය",
+  "led.brightness|block": "දීප්තිමත් බව",
+  "led.enable|block": "led enable %on",
+  "led.plotBarGraph|block": "plot bar graph of %value |up to %high",
+  "led.plot|block": "plot|x %x|y %y",
+  "led.point|block": "point|x %x|y %y",
+  "led.setBrightness|block": "බැබලීම සකසන්න %value",
+  "led.stopAnimation|block": "සජීවීකරණ නතර කරන්න",
+  "led.toggle|block": "toggle|x %x|y %y",
+  "led.unplot|block": "unplot|x %x|y %y",
+  "led|block": "led",
+  "music.beat|block": "%fraction|beat",
+  "music.changeTempoBy|block": "තාල වේගය (bpm)|%value කින් වෙනස් කරන්න",
+  "music.noteFrequency|block": "%note",
+  "music.playTone|block": "play|tone %note=device_note|for %duration=device_beat",
+  "music.rest|block": "rest(ms)|%duration=device_beat",
+  "music.ringTone|block": "ring tone (Hz)|%note=device_note",
+  "music.setTempo|block": "set tempo to (bpm)|%value",
+  "music.tempo|block": "තාල වේගය (bpm)",
+  "music|block": "සංගීතය",
+  "pins.analogPitch|block": "analog pitch %frequency|for (ms) %ms",
+  "pins.analogReadPin|block": "analog read|pin %name",
+  "pins.analogSetPeriod|block": "analog set period|pin %pin|to (µs)%micros",
+  "pins.analogSetPitchPin|block": "analog set pitch pin %name",
+  "pins.analogWritePin|block": "analog write|pin %name|to %value",
+  "pins.digitalReadPin|block": "digital read|pin %name",
+  "pins.digitalWritePin|block": "digital write|pin %name|to %value",
+  "pins.i2cReadNumber|block": "i2c read number|at address %address|of format %format=i2c_sizeof",
+  "pins.i2cWriteNumber|block": "i2c write number|at address %address|with value %value|of format %format=i2c_sizeof",
+  "pins.map|block": "map %value|from low %fromLow|from high %fromHigh|to low %toLow|to high %toHigh",
+  "pins.onPulsed|block": "on|pin %pin|pulsed %pulse",
+  "pins.pulseDuration|block": "ස්පන්දන පැවතුම් කාලය (µs)",
+  "pins.servoSetPulse|block": "servo set pulse|pin %value|to (µs) %micros",
+  "pins.servoWritePin|block": "servo write|pin %name|to %value",
+  "pins.setPull|block": "set pull|pin %pin|to %pull",
+  "pins.spiWrite|block": "spi write %value",
+  "pins|block": "කූරු",
+  "serial.onDataReceived|block": "serial|on data received %delimiters=serial_delimiter_conv",
+  "serial.readLine|block": "serial|read line",
+  "serial.readString|block": "serial|read string",
+  "serial.readUntil|block": "serial|read until %delimiter=serial_delimiter_conv",
+  "serial.redirect|block": "serial|redirect to|TX %tx|RX %rx|at baud rate %rate",
+  "serial.writeLine|block": "serial|write line %text",
+  "serial.writeNumber|block": "serial|write number %value",
+  "serial.writeString|block": "serial|write string %text",
+  "serial.writeValue|block": "serial|write value %name|= %value",
+  "serial|block": "අනුක්‍රමික",
+  "{id:category}Basic": "මූලික",
+  "{id:category}Control": "පාලනය",
+  "{id:category}Game": "ක්‍රීඩාව",
+  "{id:category}Images": "පින්තූර",
+  "{id:category}Input": "ආදානය",
+  "{id:category}Led": "Led",
+  "{id:category}Math": "ගණිත",
+  "{id:category}Music": "සංගීතය",
+  "{id:category}Pins": "කූරු",
+  "{id:category}Serial": "අනුක්‍රමික",
+  "{id:category}String": "String"
+}

libs/core/_locales/sv-SE/core-jsdoc-strings.json

@@ -1,5 +1,65 @@
 {
   "Math.abs": "Returnerar absolutbeloppet av ett tal (värdet utan hänsyn till huruvida det är positivt eller negativt). \nTill exempel är absolutbeloppet av -5 detsamma som absolutbeloppet av 5.",
   "Math.max": "Returnerar det större av två givna numeriska uttryck.",
-  "Math.min": "Returnerar det mindre av två givna numeriska uttryck."
+  "Math.min": "Returnerar det mindre av två givna numeriska uttryck.",
+  "Math.randomBoolean": "Genererar ett värde \"sant\" eller \"falskt\" slumpmässigt, precis som när man singlar slant.",
+  "String.fromCharCode": "Gör en sträng från den givna ASCII-teckenkoden.",
+  "basic": "Ger tillgång till grundläggande micro:bit funktionalitet.",
+  "basic.clearScreen": "Stäng av alla lysdioder",
+  "basic.forever": "Repetera koden för alltid i bakgrunden. För varje iteration, kan annan kod köra.",
+  "basic.pause": "Pausa under angiven tid i millisekunder",
+  "basic.pause|param|ms": "hur lång pausen är, t. ex.: 100, 200, 500, 1000, 2000",
+  "basic.plotLeds": "Ritar en bild på LED-skärmen.",
+  "basic.plotLeds|param|leds": "mönster av lysdioder att slå på/av",
+  "basic.showAnimation": "Visar en sekvens av LED-skärmar som en animering.",
+  "basic.showAnimation|param|interval": "tid i millisekunder mellan varje omritning",
+  "basic.showAnimation|param|leds": "mönster av lysdioder att slå på/av",
+  "basic.showLeds": "Ritar en bild på LED-skärmen.",
+  "basic.showLeds|param|interval": "tid i millisekunder för att pausa efter ritning",
+  "basic.showLeds|param|leds": "mönstret av lysdioder att slå på/av",
+  "basic.showNumber": "Skrollar ett nummer på skärmen. Om numret passar på skärmen (dvs. är en enda siffra), skrolla inte.",
+  "basic.showNumber|param|interval": "hastigheten på rullningen; t. ex.: 150, 100, 200, -100",
+  "basic.showString": "Visa text på displayen, ett tecken i taget. Om strängen får plats på skärmen (dvs. är en enda bokstav), skrolla inte.",
+  "basic.showString|param|interval": "hastighet på teckenbyte; t. ex.: 150, 100, 200, -100",
+  "basic.showString|param|text": "texten att rullas på skärmen, t. ex.: \"Hej!\"",
+  "control": "Verktyg för runtime och händelser.",
+  "control.inBackground": "Schemalägger kod som körs i bakgrunden.",
+  "control.reset": "Återställer BBC micro:bit.",
+  "control.waitMicros": "Blockerar den aktuella fibern i antal angivna mikrosekunder",
+  "control.waitMicros|param|micros": "antal mikro-sekunder att vänta. t.ex.: 4",
+  "game": "En enstaka LED sprite spelmotor",
+  "game.startCountdown": "Startar en spel timer",
+  "game.startCountdown|param|ms": "nedräkningstid i millisekunder, t.ex.: 10000",
+  "images": "Skapandet, manipulation och visning av LED bilder.",
+  "images.createBigImage": "Skapar en bild med 2 ramar.",
+  "images.createImage": "Skapar en bild som passar på LED-skärmen.",
+  "input": "Händelser och data från sensorer",
+  "input.acceleration": "Få acceleration värdet i milli-gravitys (när brädet ligger platt med skärmen upp, x=0, y=0 och z=-1024)",
+  "input.buttonIsPressed": "Få knapp tillståndet (tryckt eller inte) för ``A`` och ``B``.",
+  "input.buttonIsPressed|param|button": "knappen att skicka begäran om, t.ex.: Button.A",
+  "input.compassHeading": "Få aktuell kompass riktning i grader.",
+  "input.lightLevel": "Läser in ljusnivån som träffar LED-skärmen i ett intervall från '' 0'' (mörkt) till '' 255'' ljust.",
+  "input.magneticForce": "Få magnetisk kraft värdet i ``mikro-Teslas`` (``µT``). Denna funktion stöds inte i simulatorn.",
+  "input.onButtonPressed": "Göra något när du trycker på en knapp (``A``, ``B`` eller båda ``A+B``)",
+  "input.onButtonPressed|param|body": "kod att köra när knappen trycks",
+  "input.onPinPressed": "Gör något när du trycker på en pin.",
+  "input.onPinPressed|param|body": "koden som körs när en pin är tryckt",
+  "input.onPinPressed|param|name": "den pin som måste tryckas, t.ex.: TouchPin.P0",
+  "input.onPinReleased": "Gör något när en pin är släppt.",
+  "input.onPinReleased|param|body": "koden som körs när en pin är släppt",
+  "input.onPinReleased|param|name": "den pin som behöver släppas, t.ex.: TouchPin.P0",
+  "input.onScreenDown": "Fäster kod att köras när skärmen är vänd nedåt.",
+  "input.onScreenUp": "Fäster kod att köras när skärmen är vänd uppåt.",
+  "input.onShake": "Fäster kod att köras när enheten skakas.",
+  "input.pinIsPressed": "Hämtar en pins tillstånd (tryckt eller inte). Krävs att man även håller på jord (\"GND\") för att sluta kretsen.",
+  "input.pinIsPressed|param|name": "den pin som används för att upptäcka vidrörning, t.ex: TouchPin.P0",
+  "led": "Kontroll av LED-skärmen.",
+  "led.enable": "Slår på eller av skärmen",
+  "led.plotAll": "Tänder alla lysdioder",
+  "led.plotBarGraph|param|value": "aktuella värdet att rita",
+  "led.screenshot": "Tar en skärmdump av LED-skärmen och returnerar en bild.",
+  "led.stopAnimation": "Avbryter den aktuella animationen och rensar andra väntande animationer.",
+  "led.toggleAll": "Inverterar den nuvarande LED-displayen",
+  "music.ringTone": "Spelar upp en ton genom pin ``P0``.",
+  "music.setTempo|param|bpm": "Det nya tempot i beats per minut, t.ex.: 120"
 }

libs/core/_locales/sv-SE/core-strings.json

@@ -0,0 +1,174 @@
+{
+  "AcceleratorRange.EightG": "Accelerometern mäter krafter upp till 8 g",
+  "AcceleratorRange.EightG|block": "8g",
+  "AcceleratorRange.FourG": "Accelerometern mäter krafter upp till 4 g",
+  "AcceleratorRange.FourG|block": "4g",
+  "AcceleratorRange.OneG": "Accelerometern mäter krafter upp till 1 g",
+  "AcceleratorRange.OneG|block": "1g",
+  "AcceleratorRange.TwoG": "Accelerometern mäter krafter upp till 2 g",
+  "AcceleratorRange.TwoG|block": "2g",
+  "BaudRate.BaudRate115200|block": "115200",
+  "BaudRate.BaudRate9600|block": "9600",
+  "BeatFraction.Breve|block": "4",
+  "BeatFraction.Double|block": "2",
+  "BeatFraction.Eighth|block": "1/8",
+  "BeatFraction.Half|block": "1/2",
+  "BeatFraction.Quarter|block": "1/4",
+  "BeatFraction.Sixteenth|block": "1/16",
+  "BeatFraction.Whole|block": "1",
+  "Button.AB|block": "A+B",
+  "Delimiters.Dollar|block": "$",
+  "Delimiters.Hash|block": "#",
+  "Delimiters.NewLine|block": "ny rad",
+  "Dimension.Strength|block": "styrka",
+  "Dimension.X|block": "x",
+  "Dimension.Y|block": "y",
+  "Dimension.Z|block": "z",
+  "Direction.Left|block": "vänster",
+  "Direction.Right|block": "höger",
+  "DisplayMode.BackAndWhite|block": "svartvitt",
+  "DisplayMode.Greyscale|block": "gråskala",
+  "EventCreationMode.CreateAndFire": "MicroBitEvent har initierats, och dess händelsehanterare exekveras omedelbart (ej lämpligt för användning inom avbrott!).",
+  "EventCreationMode.CreateOnly": "MicroBitEvent initierats, och ingen ytterligare bearbetning sker.",
+  "Gesture.EightG": "Aktiveras när en 8g stöt upptäcks",
+  "Gesture.EightG|block": "8g",
+  "Gesture.FreeFall": "Aktiveras när kortet faller!",
+  "Gesture.FreeFall|block": "fritt fall",
+  "Gesture.LogoDown": "Aktiveras när logotypen är nedåtvänd och skärmen är vertikal",
+  "Gesture.LogoDown|block": "logotyp ner",
+  "Gesture.LogoUp": "Aktiveras när logotypen är uppåtvänd och skärmen är vertikal",
+  "Gesture.LogoUp|block": "logotyp upp",
+  "Gesture.ScreenDown": "Aktiveras när skärmen pekar uppåt och kortet är horisontellt",
+  "Gesture.ScreenDown|block": "skärm ner",
+  "Gesture.ScreenUp": "Aktiveras när skärmen pekar nedåt och kortet är horisontellt",
+  "Gesture.ScreenUp|block": "skärm upp",
+  "Gesture.Shake": "Aktiveras när kortet skakas",
+  "Gesture.Shake|block": "skaka",
+  "Gesture.SixG": "Aktiveras när en 6g stöt upptäcks",
+  "Gesture.SixG|block": "6g",
+  "Gesture.ThreeG": "Aktiveras när en 3g stöt upptäcks",
+  "Gesture.ThreeG|block": "3g",
+  "Gesture.TiltLeft": "Aktiveras när skärmen pekar åt vänster",
+  "Gesture.TiltLeft|block": "luta vänster",
+  "Gesture.TiltRight": "Aktiveras när skärmen pekar åt höger",
+  "Gesture.TiltRight|block": "luta höger",
+  "LedSpriteProperty.Blink|block": "blinka",
+  "LedSpriteProperty.Brightness|block": "ljusstyrka",
+  "LedSpriteProperty.Direction|block": "riktning",
+  "LedSpriteProperty.X|block": "x",
+  "LedSpriteProperty.Y|block": "y",
+  "Math.randomBoolean|block": "välj slumpmässigt sant eller falskt",
+  "Math|block": "Matematik",
+  "Note.CSharp3|block": "C#3",
+  "Note.CSharp4|block": "C#4",
+  "Note.CSharp5|block": "C#5",
+  "Note.CSharp|block": "C#",
+  "Note.FSharp3|block": "F#3",
+  "Note.FSharp4|block": "F#4",
+  "Note.FSharp5|block": "F#5",
+  "Note.FSharp|block": "F#",
+  "Note.GSharp3|block": "G#3",
+  "Note.GSharp4|block": "G#4",
+  "Note.GSharp5|block": "G#5",
+  "Note.GSharp|block": "G#",
+  "PinPullMode.PullDown|block": "ner",
+  "PinPullMode.PullUp|block": "upp",
+  "PulseValue.High|block": "hög",
+  "PulseValue.Low|block": "låg",
+  "Rotation.Pitch|block": "lutningsgrad",
+  "Rotation.Roll|block": "roll",
+  "String.fromCharCode|block": "text från teckenkod %code",
+  "String|block": "Sträng",
+  "basic.clearScreen|block": "Rensa skärmen",
+  "basic.forever|block": "för alltid",
+  "basic.pause|block": "pausa (ms) %pause",
+  "basic.showLeds|block": "visa lysdioder",
+  "basic.showNumber|block": "visa|nummer %number",
+  "basic.showString|block": "visa|sträng %text",
+  "basic|block": "grundläggande",
+  "control.inBackground|block": "kör i bakgrunden",
+  "control.reset|block": "återställ",
+  "control.waitMicros|block": "vänta (µs)%micros",
+  "control|block": "kontroll",
+  "game.addScore|block": "ändra poäng med|%points",
+  "game.gameOver|block": "spelet är slut",
+  "game.score|block": "poäng",
+  "game.setScore|block": "ställa in poäng %points",
+  "game.startCountdown|block": "börja nedräkning|(ms) %duration",
+  "game|block": "spel",
+  "images.createBigImage|block": "skapa stor bild",
+  "images.createImage|block": "skapa bild",
+  "images|block": "bilder",
+  "input.acceleration|block": "acceleration (mg) |%NAME",
+  "input.buttonIsPressed|block": "knapp|%NAME|trycks",
+  "input.compassHeading|block": "kompassriktning (°)",
+  "input.lightLevel|block": "ljusnivå",
+  "input.magneticForce|block": "magnetisk kraft (µT) |%NAME",
+  "input.onButtonPressed|block": "när knapp|%NAME|trycks",
+  "input.onGesture|block": "när |%NAME",
+  "input.onPinPressed|block": "när pin %name|trycks",
+  "input.onPinReleased|block": "när pin %NAME|släpps",
+  "input.pinIsPressed|block": "pin %NAME|är tryckt",
+  "input.rotation|block": "rotation (°)|%NAME",
+  "input.runningTime|block": "körtid (ms)",
+  "input.setAccelerometerRange|block": "ange accelerometer|räckvidd %range",
+  "input.temperature|block": "temperatur (° C)",
+  "input|block": "input",
+  "led.brightness|block": "ljusstyrka",
+  "led.enable|block": "led aktivera %on",
+  "led.plotBarGraph|block": "rita diagram av %value|upp till %high",
+  "led.plot|block": "tänd|x %x|y %y",
+  "led.point|block": "punkt|x %x|y %y",
+  "led.setBrightness|block": "ställa in ljusstyrka %value",
+  "led.stopAnimation|block": "avbryt animering",
+  "led.toggle|block": "växla|x %x|y %y",
+  "led.unplot|block": "släck|x %x|y %y",
+  "led|block": "led",
+  "music.beat|block": "%fraction|taktslag",
+  "music.changeTempoBy|block": "ändra tempo med (bpm)|%value",
+  "music.noteFrequency|block": "%note",
+  "music.playTone|block": "spela|ton %note=device_note|i %duration=device_beat",
+  "music.rest|block": "vila(ms)|%duration=device_beat",
+  "music.ringTone|block": "spela ton (Hz)|%note=device_note",
+  "music.setTempo|block": "ställ in tempo till (bpm)|%value",
+  "music.tempo|block": "tempo (bpm)",
+  "music|block": "musik",
+  "pins.analogPitch|block": "analog tonhöjd %frequency|för (ms) %ms",
+  "pins.analogReadPin|block": "analog läsa in|pin %name",
+  "pins.analogSetPeriod|block": "analog ställ in perioden|pin %pin|till (µs)%micros",
+  "pins.analogSetPitchPin|block": "analog ställ in tonhöjd pin %name",
+  "pins.analogWritePin|block": "analog skriv|pin %name|till %value",
+  "pins.digitalReadPin|block": "digital läsa in|pin %name",
+  "pins.digitalWritePin|block": "digital skriv|pin %name|till %value",
+  "pins.i2cReadNumber|block": "i2c läsa in nummer|på adress %address|i format %format=i2c_sizeof",
+  "pins.i2cWriteNumber|block": "i2c skriva nummer|till adress %address|med värde %value|i format %format=i2c_sizeof",
+  "pins.map|block": "mappa %value|från låg %fromLow|från hög %fromHigh|till låg %toLow|till hög %toHigh",
+  "pins.onPulsed|block": "när|pin %pin|pulserade %pulse",
+  "pins.pulseDuration|block": "pulslängd (µs)",
+  "pins.servoSetPulse|block": "servo ställa in puls|pin %value|till (µs) %micros",
+  "pins.servoWritePin|block": "servo skriv|pin %name|till %value",
+  "pins.setPull|block": "ställ in dra upp|pin %pin|till %pull",
+  "pins.spiWrite|block": "spi skriv %value",
+  "pins|block": "pins",
+  "serial.onDataReceived|block": "seriell|när data tas emot %delimiters=serial_delimiter_conv",
+  "serial.readLine|block": "seriell|läsa rad",
+  "serial.readString|block": "seriell|läsa sträng",
+  "serial.readUntil|block": "seriell|läsa tills %delimiter=serial_delimiter_conv",
+  "serial.redirect|block": "seriella omdirigera till|TX %tx|RX %rx|med baud rate %rate",
+  "serial.writeLine|block": "seriell|skriv rad %text",
+  "serial.writeNumber|block": "seriell|skriv nummer %value",
+  "serial.writeString|block": "seriell|skriv sträng %text",
+  "serial.writeValue|block": "seriell|skriv värdet %name|= %värde",
+  "serial|block": "seriell",
+  "{id:category}Basic": "Grundläggande",
+  "{id:category}Control": "Kontroll",
+  "{id:category}Game": "Spel",
+  "{id:category}Images": "Bilder",
+  "{id:category}Input": "Input",
+  "{id:category}Led": "Led",
+  "{id:category}Math": "Matematik",
+  "{id:category}Music": "Musik",
+  "{id:category}Pins": "Pins",
+  "{id:category}Serial": "Seriell",
+  "{id:category}String": "Sträng"
+}

libs/core/basic.cpp

@@ -75,6 +75,7 @@ namespace basic {
     //% help=basic/clear-screen weight=79
     //% blockId=device_clear_display block="clear screen"
     //% parts="ledmatrix"
+    //% advanced=true
     void clearScreen() {
       uBit.display.image.clear();
     }

libs/core/control.cpp

@@ -56,6 +56,10 @@ enum EventBusValue {
     MICROBIT_BUTTON_EVT_CLICK_ = MICROBIT_BUTTON_EVT_CLICK,
     MICROBIT_RADIO_EVT_DATAGRAM_ = MICROBIT_RADIO_EVT_DATAGRAM,
     MICROBIT_ACCELEROMETER_EVT_DATA_UPDATE_ = MICROBIT_ACCELEROMETER_EVT_DATA_UPDATE,
+    MICROBIT_PIN_EVT_RISE_ = MICROBIT_PIN_EVT_RISE,
+    MICROBIT_PIN_EVT_FALL_ = MICROBIT_PIN_EVT_FALL,
+    MICROBIT_PIN_EVT_PULSE_HI_ = MICROBIT_PIN_EVT_PULSE_HI,
+    MICROBIT_PIN_EVT_PULSE_LO_ = MICROBIT_PIN_EVT_PULSE_LO,
     MES_ALERT_EVT_ALARM1_ = MES_ALERT_EVT_ALARM1,
     MES_ALERT_EVT_ALARM2_ = MES_ALERT_EVT_ALARM2,
     MES_ALERT_EVT_ALARM3_ = MES_ALERT_EVT_ALARM3,
@@ -189,6 +193,7 @@ namespace control {
      * Gets a friendly name for the device derived from the its serial number
      */
     //% blockId="control_device_name" block="device name" weight=10 blockGap=8
+    //% advanced=true
     StringData* deviceName() {
         return ManagedString(microbit_friendly_name()).leakData();
     }
@@ -197,6 +202,7 @@ namespace control {
     * Derive a unique, consistent serial number of this device from internal data.
     */
     //% blockId="control_device_serial_number" block="device serial number" weight=9
+    //% advanced=true
     int deviceSerialNumber() {
         return microbit_serial_number();
     }

libs/core/control.ts

@@ -9,7 +9,7 @@ namespace control {
      * Returns the value of a C++ runtime constant
      */
     //% weight=2 weight=19 blockId="control_event_source_id" block="%id" blockGap=8
-    //% shim=TD_ID
+    //% shim=TD_ID advanced=true
     export function eventSourceId(id: EventBusSource): number {
         return id;
     }
@@ -17,7 +17,7 @@ namespace control {
      * Returns the value of a C++ runtime constant
      */
     //% weight=1 weight=19 blockId="control_event_value_id" block="%id"
-    //% shim=TD_ID
+    //% shim=TD_ID advanced=true
     export function eventValueId(id: EventBusValue): number {
         return id;
     }

libs/core/core.cpp

@@ -21,7 +21,12 @@ namespace String_ {
 
     //%
     int compare(StringData *s, StringData *that) {
-        return strcmp(s->data, that->data);
+      int compareResult = strcmp(s->data, that->data);
+      if (compareResult < 0)
+        return -1;
+      else if (compareResult > 0)
+        return 1;
+      return 0;
     }
 
     //%

libs/core/enums.d.ts

@@ -179,6 +179,10 @@ declare namespace input {
     MICROBIT_BUTTON_EVT_CLICK = 3,  // MICROBIT_BUTTON_EVT_CLICK
     MICROBIT_RADIO_EVT_DATAGRAM = 1,  // MICROBIT_RADIO_EVT_DATAGRAM
     MICROBIT_ACCELEROMETER_EVT_DATA_UPDATE = 1,  // MICROBIT_ACCELEROMETER_EVT_DATA_UPDATE
+    MICROBIT_PIN_EVT_RISE = 2,  // MICROBIT_PIN_EVT_RISE
+    MICROBIT_PIN_EVT_FALL = 3,  // MICROBIT_PIN_EVT_FALL
+    MICROBIT_PIN_EVT_PULSE_HI = 4,  // MICROBIT_PIN_EVT_PULSE_HI
+    MICROBIT_PIN_EVT_PULSE_LO = 5,  // MICROBIT_PIN_EVT_PULSE_LO
     MES_ALERT_EVT_ALARM1 = 6,  // MES_ALERT_EVT_ALARM1
     MES_ALERT_EVT_ALARM2 = 7,  // MES_ALERT_EVT_ALARM2
     MES_ALERT_EVT_ALARM3 = 8,  // MES_ALERT_EVT_ALARM3
@@ -276,6 +280,32 @@ declare namespace led {
     P3 = 10,  // MICROBIT_ID_IO_P3
     P4 = 11,  // MICROBIT_ID_IO_P4
     P10 = 17,  // MICROBIT_ID_IO_P10
+    //% block="P5 (write only)"
+    P5 = 12,  // MICROBIT_ID_IO_P5
+    //% block="P6 (write only)"
+    P6 = 13,  // MICROBIT_ID_IO_P6
+    //% block="P5 (write only)"
+    P7 = 14,  // MICROBIT_ID_IO_P7
+    //% block="P8 (write only)"
+    P8 = 15,  // MICROBIT_ID_IO_P8
+    //% block="P9 (write only)"
+    P9 = 16,  // MICROBIT_ID_IO_P9
+    //% block="P11 (write only)"
+    P11 = 18,  // MICROBIT_ID_IO_P11
+    //% block="P12 (write only)"
+    P12 = 19,  // MICROBIT_ID_IO_P12
+    //% block="P13 (write only)"
+    P13 = 20,  // MICROBIT_ID_IO_P13
+    //% block="P14 (write only)"
+    P14 = 21,  // MICROBIT_ID_IO_P14
+    //% block="P15 (write only)"
+    P15 = 22,  // MICROBIT_ID_IO_P15
+    //% block="P16 (write only)"
+    P16 = 23,  // MICROBIT_ID_IO_P16
+    //% block="P19 (write only)"
+    P19 = 24,  // MICROBIT_ID_IO_P19
+    //% block="P20 (write only)"
+    P20 = 25,  // MICROBIT_ID_IO_P20
     }
 
 
@@ -297,6 +327,18 @@ declare namespace led {
     }
 
 
+    declare enum PinEventType {
+    //% block="edge"
+    Edge = 1,  // MICROBIT_PIN_EVENT_ON_EDGE
+    //% block="pulse"
+    Pulse = 2,  // MICROBIT_PIN_EVENT_ON_PULSE
+    //% block="touch"
+    Touch = 3,  // MICROBIT_PIN_EVENT_ON_TOUCH
+    //% block="none"
+    None = 0,  // MICROBIT_PIN_EVENT_NONE
+    }
+
+
     declare enum SerialPin {
     P0 = 7,  // MICROBIT_ID_IO_P0
     P1 = 8,  // MICROBIT_ID_IO_P1

libs/core/icons.ts

@@ -0,0 +1,521 @@
+/*
+The MIT License (MIT)
+
+Copyright (c) 2013-2016 The MicroPython-on-micro:bit Developers, as listed
+in the accompanying AUTHORS file
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+*/
+
+// Images from file microbitconstimage.cpp https://github.com/bbcmicrobit/micropython
+
+enum IconNames {
+    //% block="heart"
+    Heart = 0,
+    //% block="small heart"
+    SmallHeart,
+    //% block="yes"
+    Yes,
+    //% block="no"
+    No,
+    //% block="happy"
+    Happy,
+    //% block="sad"
+    Sad,
+    //% block="confused"
+    Confused,
+    //% block="angry"
+    Angry,
+    //% block="asleep"
+    Asleep,
+    //% block="surprised"
+    Surprised,
+    //% block="silly"
+    Silly,
+    //% block="fabulous"
+    Fabulous,
+    //% block="meh"
+    Meh,
+    //% block="t-shirt"
+    TShirt,
+    //% block="roller skate"
+    Rollerskate,
+    //% block="duck"
+    Duck,
+    //% block="house"
+    House,
+    //% block="tortoise"
+    Tortoise,
+    //% block="butterfly"
+    Butterfly,
+    //% block="stick figure"
+    StickFigure,
+    //% block="ghost"
+    Ghost,
+    //% block="sword"
+    Sword,
+    //% block="giraffe"
+    Giraffe,
+    //% block="skull"
+    Skull,
+    //% block="umbrella"
+    Umbrella,
+    //% block="snake"
+    Snake,
+    //% block="rabbit"
+    Rabbit,
+    //% block="cow"
+    Cow,
+    //% block="quarter note"
+    QuarterNote,
+    //% block="eigth note"
+    EigthNote,
+    //% block="pitchfork"
+    Pitchfork,
+    //% block="pac man"
+    Pacman,
+    //% block="target"
+    Target,
+    //% block="triangle"
+    Triangle,
+    //% block="left triangle"
+    LeftTriangle,
+    //% block="chess board"
+    Chessboard,
+    //% block="diamond"
+    Diamond,
+    //% block="small diamond"
+    SmallDiamond,
+    //% block="square"
+    Square,
+    //% block="small square"
+    SmallSquare, 
+}
+
+enum ArrowNames {
+    //% blockIdentity=images.arrowNumber
+    North = 0,
+    //% blockIdentity=images.arrowNumber
+    NorthEast,
+    //% blockIdentity=images.arrowNumber
+    East,
+    //% blockIdentity=images.arrowNumber
+    SouthEast,
+    //% blockIdentity=images.arrowNumber
+    South,
+    //% blockIdentity=images.arrowNumber 
+    SouthWest,
+    //% blockIdentity=images.arrowNumber
+    West,
+    //% blockIdentity=images.arrowNumber
+    NorthWest,
+}
+
+namespace basic {
+
+    /**
+     * Draws the selected icon on the LED screen
+     */
+    //% weight=90 blockGap=8
+    //% blockId=basic_show_icon 
+    //% block="show icon %i" icon="\uf00a"
+    //% parts="ledmatrix"
+    export function showIcon(icon: IconNames) {
+        let res = images.iconImage(icon)
+        res.showImage(0)
+    }
+
+    //% weight=50 blockGap=8
+    //% blockId=basic_show_arrow 
+    //% block="show arrow %i=device_arrow"
+    //% parts="ledmatrix"
+    //% advanced=true
+    export function showArrow(i: number) {
+        let res = images.arrowImage(i)
+        res.showImage(0)
+    }
+}
+
+
+namespace images {
+
+    function getArrow(i : ArrowNames): string {
+            switch(i) {
+            // compass directions
+            case ArrowNames.North: return `    
+                                        . . # . .
+                                        . # # # .
+                                        # . # . #
+                                        . . # . .
+                                        . . # . .`;
+            case ArrowNames.NorthEast: return ` 
+                                        . . # # #
+                                        . . . # #
+                                        . . # . #
+                                        . # . . .
+                                        # . . . .`;
+            case  ArrowNames.East: return ` 
+                                        . . # . .
+                                        . . . # .
+                                        # # # # #
+                                        . . . # .
+                                        . . # . .`;
+            case ArrowNames.SouthEast: return ` 
+                                        # . . . .
+                                        . # . . .
+                                        . . # . #
+                                        . . . # #
+                                        . . # # #`;
+            case ArrowNames.South: return ` 
+                                        . . # . .
+                                        . . # . .
+                                        # . # . #
+                                        . # # # .
+                                        . . # . .`;
+            case ArrowNames.SouthWest: return ` 
+                                        . . . . #
+                                        . . . # .
+                                        # . # . .
+                                        # # . . .
+                                        # # # . .`;
+            case ArrowNames.West: return ` 
+                                        . . # . .
+                                        . # . . .
+                                        # # # # #
+                                        . # . . .
+                                        . . # . .`;
+            case ArrowNames.NorthWest: return ` 
+                                        # # # . .
+                                        # # . . .
+                                        # . # . .
+                                        . . . # .
+                                        . . . . #`;
+            default:                return `
+                                        . . . . .
+                                        . . . . .
+                                        . . . . .
+                                        . . . . .
+                                        . . . . .
+                                        `;
+       }
+    }
+    
+    function getIcon(i: IconNames): string {
+
+            switch (i) {
+            case IconNames.Heart : return `
+                                        . # . # .
+                                        # # # # #
+                                        # # # # #
+                                        . # # # .
+                                        . . # . .`;
+
+            case IconNames.SmallHeart : return `
+                                        . . . . .
+                                        . # . # .
+                                        . # # # .
+                                        . . # . .
+                                        . . . . .`;
+                                            //faces
+            case IconNames.Happy: return `
+                                        . . . . .
+                                        . # . # .
+                                        . . . . .
+                                        # . . . #
+                                        . # # # .`;
+            case IconNames.Sad: return `
+                                        . . . . .
+                                        . # . # .
+                                        . . . . .
+                                        . # # # .
+                                        # . . . #`;
+            case IconNames.Confused: return `
+                                        . . . . .
+                                        . # . # .
+                                        . . . . .
+                                        . # . # .
+                                        # . # . #`;
+            case IconNames.Angry: return `
+                                        # . . . #
+                                        . # . # .
+                                        . . . . .
+                                        # # # # #
+                                        # . # . #`;
+            case IconNames.Asleep: return `
+                                        . . . . .
+                                        # # . # #
+                                        . . . . .
+                                        . # # # .
+                                        . . . . .`;
+            case IconNames.Surprised: return `
+                                        . # . # .
+                                        . . . . .
+                                        . . # . .
+                                        . # . # .
+                                        . . # . .`;
+            case IconNames.Silly: return `
+                                        # . . . #
+                                        . . . . .
+                                        # # # # #
+                                        . . . # #
+                                        . . . # #`;
+            case IconNames.Fabulous: return `
+                                        # # # # #
+                                        # # . # #
+                                        . . . . .
+                                        . # . # .
+                                        . # # # .`;
+            case IconNames.Meh: return `
+                                        # # . # #
+                                        . . . . .
+                                        . . . # .
+                                        . . # . .
+                                        . # . . .`;
+            case IconNames.Yes: return `
+                                        . . . . .
+                                        . . . . #
+                                        . . . # .
+                                        # . # . .
+                                        . # . . .`;
+            case IconNames.No: return `
+                                        # . . . #
+                                        . # . # .
+                                        . . # . .
+                                        . # . # .
+                                        # . . . #`;
+            case IconNames.Triangle: return `
+                                        . . . . .
+                                        . . # . .
+                                        . # . # .
+                                        # # # # #
+                                        . . . . .`;
+            case IconNames.LeftTriangle: return `
+                                        # . . . .
+                                        # # . . .
+                                        # . # . .
+                                        # . . # .
+                                        # # # # #`;
+            case IconNames.Chessboard: return `
+                                        . # . # .
+                                        # . # . #
+                                        . # . # .
+                                        # . # . #
+                                        . # . # .`;
+            case IconNames.Diamond: return `
+                                        . . # . .
+                                        . # . # .
+                                        # . . . #
+                                        . # . # .
+                                        . . # . .`;
+            case IconNames.SmallDiamond: return `
+                                        . . . . .
+                                        . . # . .
+                                        . # . # .
+                                        . . # . .
+                                        . . . . .`;
+            case IconNames.Square: return `
+                                        # # # # #
+                                        # . . . #
+                                        # . . . #
+                                        # . . . #
+                                        # # # # #`;
+            case IconNames.SmallSquare: return `
+                                        . . . . .
+                                        . # # # .
+                                        . # . # .
+                                        . # # # .
+                                        . . . . .`;
+                                            // The following images were designed by Abbie Brooks.
+            case IconNames.TShirt: return `
+                                        # # . # #
+                                        # # # # #
+                                        . # # # .
+                                        . # # # .
+                                        . # # # .`;
+            case IconNames.Rollerskate: return `
+                                        . . . # #
+                                        . . . # #
+                                        # # # # #
+                                        # # # # #
+                                        . # . # .`;
+            case IconNames.Duck: return `
+                                        . # # . .
+                                        # # # . .
+                                        . # # # #
+                                        . # # # .
+                                        . .. . .`;
+            case IconNames.House: return `
+                                        . . # . .
+                                        . # # # .
+                                        # # # # #
+                                        . # # # .
+                                        . # . # .`;
+            case IconNames.Tortoise: return `
+                                        . . . . .
+                                        . # # # .
+                                        # # # # #
+                                        . # . # .
+                                        . . . . .`;
+            case IconNames.Butterfly: return `
+                                        # # . # #
+                                        # # # # #
+                                        . . # . .
+                                        # # # # #
+                                        # # . # #`;
+            case IconNames.StickFigure: return `
+                                        . . # . .
+                                        # # # # #
+                                        . . # . .
+                                        . # . # .
+                                        # . . . #`;
+            case IconNames.Ghost: return `
+                                        . # # # .
+                                        # . # . #
+                                        # # # # #
+                                        # # # # #
+                                        # . # . #`;
+            case IconNames.Sword: return `
+                                        . . # . .
+                                        . . # . .
+                                        . . # . .
+                                        . # # # .
+                                        . . # . .`;
+            case IconNames.Giraffe: return `
+                                        # # . . .
+                                        . # . . .
+                                        . # . . .
+                                        . # # # .
+                                        . # . # .`;
+            case IconNames.Skull: return `
+                                        . # # # .
+                                        # . # . #
+                                        # # # # #
+                                        . # # # .
+                                        . # # # .`;
+            case IconNames.Umbrella: return `
+                                        . # # # .
+                                        # # # # #
+                                        . . # . .
+                                        # . # . .
+                                        # # # . .`;
+            case IconNames.Snake: return `
+                                        # # . . .
+                                        # # . # #
+                                        . # . # .
+                                        . # # # .
+                                        . . . . .`;
+                                        // animals    
+            case IconNames.Rabbit: return `
+                                        # . # . .
+                                        # . # . .
+                                        # # # # .
+                                        # # . # .
+                                        # # # # .`;
+            case IconNames.Cow: return `
+                                        # . . . #
+                                        # . . . #
+                                        # # # # #
+                                        . # # # .
+                                        . . # . .`;
+                                        // musical notes
+            case IconNames.QuarterNote: return `
+                                        . . # . .
+                                        . . # . .
+                                        . . # . .
+                                        # # # . .
+                                        # # # . .`;
+            case IconNames.EigthNote: return `
+                                        . . # . .
+                                        . . # # .
+                                        . . # . #
+                                        # # # . .
+                                        # # # . .`;
+                                        // other icons
+            case IconNames.Pitchfork: return `
+                                        # . # . #
+                                        # . # . #
+                                        # # # # #
+                                        . . # . .
+                                        . . # . .`;
+            case IconNames.Pacman: return `
+                                        . # # # #
+                                        # # # # .
+                                        # # # . .
+                                        # # # # .
+                                        . # # # #`;
+            case IconNames.Target: return `
+                                        . . # . .
+                                        . # # # .
+                                        # # . # #
+                                        . # # # .
+                                        . . # . .`;
+            default:                return `
+                                        . . . . .
+                                        . . . . .
+                                        . . . . .
+                                        . . . . .
+                                        . . . . .
+                                        `;
+        }
+    }
+
+    //% weight=50 blockGap=8
+    //% blockId=device_arrow block="%arrow"
+    //% shim=TD_ID
+    export function arrowNumber(arrow: ArrowNames): number {
+        return arrow;
+    }
+
+    //% weight=50 blockGap=8
+    //% blockId=builtin_arrow_image block="arrow image %i=device_arrow"
+    export function arrowImage(i: ArrowNames): Image {
+        let res = images.createImage(`
+            . . . . .
+            . . . . .
+            . . . . .
+            . . . . .
+            . . . . .
+            `)
+        return set(res, getArrow(i));
+    }
+
+    //% weight=50 blockGap=8
+    //% blockId=builtin_image block="icon image %i"
+    export function iconImage(i: IconNames): Image {
+        let res = images.createImage(`
+                . . . . .
+                . . . . .
+                . . . . .
+                . . . . .
+                . . . . .
+                `)
+        return set(res, getIcon(i));
+    }
+
+    function set(res: Image, s: string) {
+        let j = 0;
+        for (let x of s) {
+            if (x == "." || x == "#") {
+                res.setPixel(j % 5, j / 5, x == "#")
+                j++
+            }
+        }
+        return res
+    }
+}

libs/core/images.cpp

@@ -43,9 +43,9 @@ namespace ImageMethods {
      */
     //% help=images/show-image weight=80 blockNamespace=images
     //% blockId=device_show_image_offset block="show image %sprite|at offset %offset" blockGap=8
-    //% parts="ledmatrix"
-    void showImage(Image sprite, int xOffset) {
-      uBit.display.print(MicroBitImage(sprite), -xOffset, 0, 0);
+    //% parts="ledmatrix" async
+    void showImage(Image sprite, int xOffset, int interval = 400) {
+      uBit.display.print(MicroBitImage(sprite), -xOffset, 0, 0, interval);
     }
 
     /**
@@ -150,7 +150,7 @@ namespace ImageMethods {
      */
     //% weight=70 help=images/show-frame
     //% parts="ledmatrix"
-    void showFrame(Image i, int frame) {
-        showImage(i, frame * 5);
+    void showFrame(Image i, int frame, int interval = 400) {
+        showImage(i, frame * 5, interval);
     }
 }

libs/core/music.ts

@@ -174,7 +174,7 @@ namespace music {
      */
     //% weight=50 help=music/note-frequency
     //% blockId=device_note block="%note"
-    //% shim=TD_ID
+    //% shim=TD_ID blockHidden=true
     export function noteFrequency(name: Note): number {
         return name;
     }

libs/core/pins.cpp

@@ -29,6 +29,32 @@ enum class AnalogPin {
     P3 = MICROBIT_ID_IO_P3,
     P4 = MICROBIT_ID_IO_P4,
     P10 = MICROBIT_ID_IO_P10,
+    //% block="P5 (write only)"
+    P5 = MICROBIT_ID_IO_P5,
+    //% block="P6 (write only)"
+    P6 = MICROBIT_ID_IO_P6,
+    //% block="P5 (write only)"
+    P7 = MICROBIT_ID_IO_P7,
+    //% block="P8 (write only)"
+    P8 = MICROBIT_ID_IO_P8,
+    //% block="P9 (write only)"
+    P9 = MICROBIT_ID_IO_P9,
+    //% block="P11 (write only)"
+    P11 = MICROBIT_ID_IO_P11,
+    //% block="P12 (write only)"
+    P12 = MICROBIT_ID_IO_P12,
+    //% block="P13 (write only)"
+    P13 = MICROBIT_ID_IO_P13,
+    //% block="P14 (write only)"
+    P14 = MICROBIT_ID_IO_P14,
+    //% block="P15 (write only)"
+    P15 = MICROBIT_ID_IO_P15,
+    //% block="P16 (write only)"
+    P16 = MICROBIT_ID_IO_P16,
+    //% block="P19 (write only)"
+    P19 = MICROBIT_ID_IO_P19,
+    //% block="P20 (write only)"
+    P20 = MICROBIT_ID_IO_P20
 };
 
 enum class PulseValue {
@@ -47,6 +73,17 @@ enum class PinPullMode {
     PullNone = 2
 };
 
+enum class PinEventType {
+    //% block="edge"
+    Edge = MICROBIT_PIN_EVENT_ON_EDGE,
+    //% block="pulse"
+    Pulse = MICROBIT_PIN_EVENT_ON_PULSE,
+    //% block="touch"
+    Touch = MICROBIT_PIN_EVENT_ON_TOUCH,
+    //% block="none"
+    None = MICROBIT_PIN_EVENT_NONE
+};
+
 MicroBitPin *getPin(int id) {
     switch (id) {
         case MICROBIT_ID_IO_P0: return &uBit.io.P0;
@@ -107,7 +144,7 @@ namespace pins {
       */
     //% help=pins/digital-write-pin weight=29
     //% blockId=device_set_digital_pin block="digital write|pin %name|to %value"
-    void digitalWritePin(DigitalPin name, int value) { 
+    void digitalWritePin(DigitalPin name, int value) {
         PINOP(setDigitalValue(value));
     }
 
@@ -116,7 +153,7 @@ namespace pins {
      * @param name pin to write to, eg: AnalogPin.P0
      */
     //% help=pins/analog-read-pin weight=25
-    //% blockId=device_get_analog_pin block="analog read|pin %name" blockGap="8" 
+    //% blockId=device_get_analog_pin block="analog read|pin %name" blockGap="8"
     int analogReadPin(AnalogPin name) {
         PINREAD(getAnalogValue());
     }
@@ -128,7 +165,7 @@ namespace pins {
      */
     //% help=pins/analog-write-pin weight=24
     //% blockId=device_set_analog_pin block="analog write|pin %name|to %value" blockGap=8
-    void analogWritePin(AnalogPin name, int value) { 
+    void analogWritePin(AnalogPin name, int value) {
         PINOP(setAnalogValue(value));
     }
 
@@ -139,11 +176,11 @@ namespace pins {
      * @param micros period in micro seconds. eg:20000
      */
     //% help=pins/analog-set-period weight=23 blockGap=8
-    //% blockId=device_set_analog_period block="analog set period|pin %pin|to (µs)%micros" 
-    void analogSetPeriod(AnalogPin name, int micros) { 
+    //% blockId=device_set_analog_period block="analog set period|pin %pin|to (µs)%micros"
+    void analogSetPeriod(AnalogPin name, int micros) {
         PINOP(setAnalogPeriodUs(micros));
     }
-    
+
     /**
     * Configures this pin to a digital input, and generates events where the timestamp is the duration that this pin was either ``high`` or ``low``.
     * @param name digital pin to register to, eg: DigitalPin.P0
@@ -154,11 +191,11 @@ namespace pins {
     void onPulsed(DigitalPin name, PulseValue pulse, Action body) {
         MicroBitPin* pin = getPin((int)name);
         if (!pin) return;
-        
-        pin->eventOn(MICROBIT_PIN_EVENT_ON_PULSE);        
+
+        pin->eventOn(MICROBIT_PIN_EVENT_ON_PULSE);
         registerWithDal((int)name, (int)pulse, body);
     }
-    
+
     /**
     * Gets the duration of the last pulse in micro-seconds. This function should be called from a ``onPulsed`` handler.
     */
@@ -174,7 +211,7 @@ namespace pins {
     * @param name the pin which measures the pulse, eg: DigitalPin.P0
     * @param value the value of the pulse, eg: PulseValue.High
     * @param maximum duration in micro-seconds
-    */    
+    */
     //% blockId="pins_pulse_in" block="pulse in (µs)|pin %name|pulsed %value"
     //% weight=20 advanced=true
     int pulseIn(DigitalPin name, PulseValue value, int maxDuration = 2000000) {
@@ -182,20 +219,20 @@ namespace pins {
         if (!pin) return 0;
 
         int pulse = value == PulseValue::High ? 1 : 0;
-        uint64_t tick =  system_timer_current_time_us(); 
-        uint64_t maxd = (uint64_t)maxDuration;      
+        uint64_t tick =  system_timer_current_time_us();
+        uint64_t maxd = (uint64_t)maxDuration;
         while(pin->getDigitalValue() != pulse) {
             if(system_timer_current_time_us() - tick > maxd)
-                return 0;            
+                return 0;
         }
 
-        uint64_t start =  system_timer_current_time_us();       
+        uint64_t start =  system_timer_current_time_us();
         while(pin->getDigitalValue() == pulse) {
             if(system_timer_current_time_us() - tick > maxd)
-                return 0;            
-        }        
-        uint64_t end =  system_timer_current_time_us();       
-        return end - start;         
+                return 0;
+        }
+        uint64_t end =  system_timer_current_time_us();
+        return end - start;
     }
 
     /**
@@ -206,7 +243,7 @@ namespace pins {
     //% help=pins/servo-write-pin weight=20
     //% blockId=device_set_servo_pin block="servo write|pin %name|to %value" blockGap=8
     //% parts=microservo trackArgs=0
-    void servoWritePin(AnalogPin name, int value) { 
+    void servoWritePin(AnalogPin name, int value) {
         PINOP(setServoValue(value));
     }
 
@@ -217,7 +254,7 @@ namespace pins {
      */
     //% help=pins/servo-set-pulse weight=19
     //% blockId=device_set_servo_pulse block="servo set pulse|pin %value|to (µs) %micros"
-    void servoSetPulse(AnalogPin name, int micros) { 
+    void servoSetPulse(AnalogPin name, int micros) {
         PINOP(setServoPulseUs(micros));
     }
 
@@ -230,7 +267,7 @@ namespace pins {
      */
     //% blockId=device_analog_set_pitch_pin block="analog set pitch pin %name"
     //% help=pins/analog-set-pitch weight=3 advanced=true
-    void analogSetPitchPin(AnalogPin name) { 
+    void analogSetPitchPin(AnalogPin name) {
       pitchPin = getPin((int)name);
     }
 
@@ -241,8 +278,8 @@ namespace pins {
      */
     //% blockId=device_analog_pitch block="analog pitch %frequency|for (ms) %ms"
     //% help=pins/analog-pitch weight=4 async advanced=true blockGap=8
-    void analogPitch(int frequency, int ms) { 
-      if (pitchPin == NULL) 
+    void analogPitch(int frequency, int ms) {
+      if (pitchPin == NULL)
         analogSetPitchPin(AnalogPin::P0);
       if (frequency <= 0) {
         pitchPin->setAnalogValue(0);
@@ -250,7 +287,7 @@ namespace pins {
         pitchPin->setAnalogValue(512);
         pitchPin->setAnalogPeriodUs(1000000/frequency);
       }
-      
+
       if (ms > 0) {
           fiber_sleep(ms);
           pitchPin->setAnalogValue(0);
@@ -259,7 +296,7 @@ namespace pins {
       }
     }
 
-    
+
     /**
     * Configures the pull of this pin.
     * @param name pin to set the pull mode on, eg: DigitalPin.P0
@@ -268,13 +305,25 @@ namespace pins {
     //% help=pins/set-pull weight=3 advanced=true
     //% blockId=device_set_pull block="set pull|pin %pin|to %pull"
     void setPull(DigitalPin name, PinPullMode pull) {
-        PinMode m = pull == PinPullMode::PullDown 
+        PinMode m = pull == PinPullMode::PullDown
             ? PinMode::PullDown
-            : pull == PinPullMode::PullUp ? PinMode::PullUp 
+            : pull == PinPullMode::PullUp ? PinMode::PullUp
             : PinMode::PullNone;
         PINOP(setPull(m));
     }
 
+    /**
+    * Configures the events emitted by this pin. Events can be subscribed to
+    * using ``control.onEvent()``.
+    * @param name pin to set the event mode on, eg: DigitalPin.P0
+    * @param type the type of events for this pin to emit, eg: PinEventType.Edge
+    */
+    //% help=pins/set-events weight=4 advanced=true
+    //% blockId=device_set_pin_events block="set pin %pin|to emit %type|events"
+    void setEvents(DigitalPin name, PinEventType type) {
+        getPin((int)name)->eventOn((int)type);
+    }
+
     /**
      * Create a new zero-initialized buffer.
      * @param size number of bytes in the buffer
@@ -295,7 +344,7 @@ namespace pins {
       uBit.i2c.read(address << 1, (char*)buf->payload, size, repeat);
       return buf;
     }
-    
+
     /**
      * Write bytes to a 7-bit I2C `address`.
      */
@@ -322,5 +371,5 @@ namespace pins {
         auto p = allocSPI();
         return p->write(value);
     }
-    
+
 }

libs/core/pxt.cpp

@@ -338,10 +338,10 @@ namespace pxt {
 
     void Segment::print()
     {
-      printf("Segment: %x, length: %u, size: %u\n", data, (uint)length, (uint)size);
-      for(uint i = 0; i < size; i++)
+      printf("Segment: %x, length: %u, size: %u\n", data, (uint32_t)length, (uint32_t)size);
+      for(uint32_t i = 0; i < size; i++)
       {
-        printf("%d ",(uint)data[i]);
+        printf("%d ",(uint32_t)data[i]);
       }
       printf("\n");
     }

libs/core/pxt.json

@@ -17,6 +17,7 @@
         "helpers.ts",
         "images.cpp",
         "basic.cpp",
+        "icons.ts",
         "input.cpp",
         "input.ts",
         "control.ts",
@@ -41,7 +42,10 @@
         "_locales/no/core-strings.json",
         "_locales/ja/core-strings.json",
         "_locales/sv-SE/core-jsdoc-strings.json",
-        "_locales/no/core-jsdoc-strings.json"
+        "_locales/no/core-jsdoc-strings.json",
+        "_locales/si-LK/core-strings.json",
+        "_locales/sv-SE/core-strings.json",
+        "_locales/si-LK/core-jsdoc-strings.json"
     ],
     "public": true,
     "dependencies": {},

libs/core/shims.d.ts

@@ -40,8 +40,8 @@ declare interface Image {
      */
     //% help=images/show-image weight=80 blockNamespace=images
     //% blockId=device_show_image_offset block="show image %sprite|at offset %offset" blockGap=8
-    //% parts="ledmatrix" shim=ImageMethods::showImage
-    showImage(xOffset: number): void;
+    //% parts="ledmatrix" async interval.defl=400 shim=ImageMethods::showImage
+    showImage(xOffset: number, interval?: number): void;
 
     /**
      * Draws the ``index``-th frame of the image on the screen.
@@ -118,8 +118,8 @@ declare interface Image {
      * @param frame TODO
      */
     //% weight=70 help=images/show-frame
-    //% parts="ledmatrix" shim=ImageMethods::showFrame
-    showFrame(frame: number): void;
+    //% parts="ledmatrix" interval.defl=400 shim=ImageMethods::showFrame
+    showFrame(frame: number, interval?: number): void;
 }
 
 
@@ -171,7 +171,8 @@ declare namespace basic {
      */
     //% help=basic/clear-screen weight=79
     //% blockId=device_clear_display block="clear screen"
-    //% parts="ledmatrix" shim=basic::clearScreen
+    //% parts="ledmatrix"
+    //% advanced=true shim=basic::clearScreen
     function clearScreen(): void;
 
     /**
@@ -415,13 +416,15 @@ declare namespace control {
     /**
      * Gets a friendly name for the device derived from the its serial number
      */
-    //% blockId="control_device_name" block="device name" weight=10 blockGap=8 shim=control::deviceName
+    //% blockId="control_device_name" block="device name" weight=10 blockGap=8
+    //% advanced=true shim=control::deviceName
     function deviceName(): string;
 
     /**
      * Derive a unique, consistent serial number of this device from internal data.
      */
-    //% blockId="control_device_serial_number" block="device serial number" weight=9 shim=control::deviceSerialNumber
+    //% blockId="control_device_serial_number" block="device serial number" weight=9
+    //% advanced=true shim=control::deviceSerialNumber
     function deviceSerialNumber(): number;
 }
 
@@ -628,6 +631,16 @@ declare namespace pins {
     //% blockId=device_set_pull block="set pull|pin %pin|to %pull" shim=pins::setPull
     function setPull(name: DigitalPin, pull: PinPullMode): void;
 
+    /**
+     * Configures the events emitted by this pin. Events can be subscribed to
+     * using ``control.onEvent()``.
+     * @param name pin to set the event mode on, eg: DigitalPin.P0
+     * @param type the type of events for this pin to emit, eg: PinEventType.Edge
+     */
+    //% help=pins/set-events weight=4 advanced=true
+    //% blockId=device_set_pin_events block="set pin %pin|to emit %type|events" shim=pins::setEvents
+    function setEvents(name: DigitalPin, type: PinEventType): void;
+
     /**
      * Create a new zero-initialized buffer.
      * @param size number of bytes in the buffer

libs/radio/_locales/no/radio-jsdoc-strings.json

@@ -0,0 +1,3 @@
+{
+  "radio.onDataPacketReceived": "Setter opp kode som skal kjøres når radioen mottar data. Henter mottatte data inn i en variabel."
+}

libs/radio/_locales/no/radio-strings.json

@@ -0,0 +1,17 @@
+{
+  "radio.onDataPacketReceived|block": "når radio mottar",
+  "radio.onDataReceived|block": "radio når data mottatt",
+  "radio.receiveNumber|block": "radio motta tall",
+  "radio.receiveString|block": "radio motta tekst",
+  "radio.receivedSignalStrength|block": "radio signalstyrke",
+  "radio.sendNumber|block": "radio send tall %value",
+  "radio.sendString|block": "radio send tekst %msg",
+  "radio.sendValue|block": "radio send|verdi %name|= %value",
+  "radio.setGroup|block": "radio sett gruppe %ID",
+  "radio.setTransmitPower|block": "radio sett sendereffekt %power",
+  "radio.setTransmitSerialNumber|block": "radio send alltid serienummer %transmit",
+  "radio.writeReceivedPacketToSerial|block": "radio skriv mottatt pakke til serieport",
+  "radio.writeValueToSerial|block": "radio skriv verdi til serieport",
+  "radio|block": "radio",
+  "{id:category}Radio": "Radio"
+}

libs/radio/_locales/si-LK/radio-jsdoc-strings.json

@@ -0,0 +1,4 @@
+{
+  "radio": "රේඩියෝ පැකට්ටු යොදා ගෙන දත්ත සන්නිවේදනය",
+  "radio.sendValue|param|value": "සංඛ්‍යාමය අගය"
+}

libs/radio/_locales/si-LK/radio-strings.json

@@ -0,0 +1,16 @@
+{
+  "radio.onDataReceived|block": "radio on data received",
+  "radio.receiveNumber|block": "radio receive number",
+  "radio.receiveString|block": "radio receive string",
+  "radio.receivedSignalStrength|block": "radio received signal strength",
+  "radio.sendNumber|block": "radio send number %value",
+  "radio.sendString|block": "radio send string %msg",
+  "radio.sendValue|block": "radio send|value %name|= %value",
+  "radio.setGroup|block": "radio set group %ID",
+  "radio.setTransmitPower|block": "radio set transmit power %power",
+  "radio.setTransmitSerialNumber|block": "radio set transmit serial number %transmit",
+  "radio.writeReceivedPacketToSerial|block": "radio write received packet to serial",
+  "radio.writeValueToSerial|block": "radio write value to serial",
+  "radio|block": "radio",
+  "{id:category}Radio": "රේඩියෝව"
+}

libs/radio/_locales/sv-SE/radio-strings.json

@@ -0,0 +1,16 @@
+{
+  "radio.onDataReceived|block": "när radion tar emot data",
+  "radio.receiveNumber|block": "när radion tar emot nummer",
+  "radio.receiveString|block": "när radio tar emot sträng",
+  "radio.receivedSignalStrength|block": "när radio tar emot signalstyrka",
+  "radio.sendNumber|block": "radio sänd nummer %value",
+  "radio.sendString|block": "radio sänd sträng %msg",
+  "radio.sendValue|block": "radio sända|värde %name|= %value",
+  "radio.setGroup|block": "radio ställ in grupp %ID",
+  "radio.setTransmitPower|block": "radio ställ in överföringsstyrke %power",
+  "radio.setTransmitSerialNumber|block": "radio ställ in om serienumret sändas %transmit",
+  "radio.writeReceivedPacketToSerial|block": "radio skriv mottagna paketet till seriell",
+  "radio.writeValueToSerial|block": "radio skriv värdet till seriell",
+  "radio|block": "radio",
+  "{id:category}Radio": "Radio"
+}

libs/radio/pxt.json

@@ -8,7 +8,12 @@
         "radio.cpp",
         "radio.ts",
         "_locales/de/radio-strings.json",
-        "_locales/de/radio-jsdoc-strings.json"
+        "_locales/de/radio-jsdoc-strings.json",
+        "_locales/si-LK/radio-strings.json",
+        "_locales/sv-SE/radio-strings.json",
+        "_locales/no/radio-strings.json",
+        "_locales/si-LK/radio-jsdoc-strings.json",
+        "_locales/no/radio-jsdoc-strings.json"
     ],
     "public": true,
     "dependencies": {

package.json

@@ -1,6 +1,6 @@
 {
   "name": "pxt-microbit",
-  "version": "0.7.23",
+  "version": "0.9.8",
   "description": "micro:bit target for PXT",
   "keywords": [
     "JavaScript",
@@ -36,6 +36,6 @@
     "semantic-ui-less": "^2.2.4"
   },
   "dependencies": {
-    "pxt-core": "0.8.13"
+    "pxt-core": "0.11.36"
   }
 }

pxtarget.json

@@ -14,8 +14,8 @@
     "cloud": {
         "workspace": false,
         "packages": true,
-        "sharing": false,
-        "publish": false,
+        "sharing": true,
+        "publishing": true,
         "preferredPackages": [
             "Microsoft/pxt-neopixel",
             "Microsoft/pxt-filesystem"
@@ -28,6 +28,7 @@
         "deployDrives": "(MICROBIT|MBED)",
         "driveName": "MICROBIT",
         "hexMimeType": "application/x-microbit-hex",
+        "openocdScript": "source [find interface/cmsis-dap.cfg]; source [find target/nrf51.cfg]",
         "upgrades": [
             {
                 "type": "package",
@@ -71,8 +72,10 @@
         "loopsBlocks": true,
         "logicBlocks": true,
         "variablesBlocks": true,
+        "textBlocks": true,
         "onStartColor": "#0078D7",
-        "onStartNamespace": "basic"
+        "onStartNamespace": "basic",
+        "onStartWeight": 54
     },
     "simulator": {
         "autoRun": true,
@@ -205,6 +208,7 @@
         "termsOfUseUrl": "https://go.microsoft.com/fwlink/?LinkID=206977",
         "githubUrl": "https://github.com/Microsoft/pxt-microbit",
         "projectGallery": "projects",
+        "exampleGallery": "examples",
         "crowdinProject": "kindscript",
         "boardName": "micro:bit",
         "sideDoc": "tutorials/getting-started",
@@ -328,6 +332,7 @@
         "invertedMenu": true,
         "coloredToolbox": true,
         "monacoToolbox": true,
+        "hasAudio": true,
         "blocklyOptions": { 
             "grid": {
                 "spacing": 45,
@@ -337,4 +342,4 @@
             }
         }
     }
-}
+}

sim/dalboard.ts

@@ -14,7 +14,6 @@ namespace pxsim {
         radioState: RadioState;
         // TODO: not singletons
         neopixelState: NeoPixelState;
-        servosState: MicroServosState;
         fileSystem: FileSystemState;
 
         constructor() {
@@ -53,7 +52,13 @@ namespace pxsim {
                     0,
                     DAL.MICROBIT_ID_IO_P19,
                     DAL.MICROBIT_ID_IO_P20
-                ]
+                ],
+                servos: {
+                    "P0": DAL.MICROBIT_ID_IO_P0,
+                    "P1": DAL.MICROBIT_ID_IO_P1,
+                    "P2": DAL.MICROBIT_ID_IO_P2,
+                    "P3": DAL.MICROBIT_ID_IO_P3
+                }
             });
             this.builtinParts["radio"] = this.radioState = new RadioState(runtime);
             this.builtinParts["accelerometer"] = this.accelerometerState = new AccelerometerState(runtime);
@@ -62,12 +67,7 @@ namespace pxsim {
             this.builtinParts["lightsensor"] = this.lightSensorState = new LightSensorState();
             this.builtinParts["compass"] = this.compassState = new CompassState();
             this.builtinParts["neopixel"] = this.neopixelState = new NeoPixelState();
-            this.builtinParts["microservo"] = this.servosState = new MicroServosState({
-                "P0": DAL.MICROBIT_ID_IO_P0,
-                "P1": DAL.MICROBIT_ID_IO_P1,
-                "P2": DAL.MICROBIT_ID_IO_P2,
-                "P3": DAL.MICROBIT_ID_IO_P3
-            });
+            this.builtinParts["microservo"] = this.edgeConnectorState;
 
             this.builtinVisuals["buttonpair"] = () => new visuals.ButtonPairView();
             this.builtinVisuals["ledmatrix"] = () => new visuals.LedMatrixView();

sim/state/edgeconnector.ts

@@ -76,8 +76,7 @@ namespace pxsim.pins {
         if (!pin) return;
 
         analogSetPeriod(pinId, 20000);
-        const state = board().servosState.servoState(pinId);
-        state.setAngle(value);
+        pin.servoAngle = value;
     }
 
     export function servoSetPulse(pinId: number, micros: number) {

sim/state/ledmatrix.ts

@@ -28,7 +28,7 @@ namespace pxsim {
             this.data = data;
         }
         public print() {
-            console.log(`Image id:${this.id} refs:${this.refcnt} size:${this.width}x${Image.height}`)
+            // console.debug(`Image id:${this.id} refs:${this.refcnt} size:${this.width}x${Image.height}`)
         }
         public get(x: number, y: number): number {
             if (x < 0 || x >= this.width || y < 0 || y >= 5) return 0;
@@ -129,10 +129,11 @@ namespace pxsim.images {
 }
 
 namespace pxsim.ImageMethods {
-    export function showImage(leds: Image, offset: number) {
+    export function showImage(leds: Image, offset: number, interval: number) {
         pxtrt.nullCheck(leds)
         leds.copyTo(offset, 5, board().ledMatrixState.image, 0)
         runtime.queueDisplayUpdate()
+        basic.pause(interval);
     }
 
     export function plotImage(leds: Image, offset: number): void {
@@ -155,8 +156,8 @@ namespace pxsim.ImageMethods {
         ImageMethods.plotImage(leds, frame * Image.height);
     }
 
-    export function showFrame(leds: Image, frame: number) {
-        ImageMethods.showImage(leds, frame * Image.height);
+    export function showFrame(leds: Image, frame: number, interval: number) {
+        ImageMethods.showImage(leds, frame * Image.height, interval);
     }
 
     export function pixel(leds: Image, x: number, y: number): number {
@@ -228,7 +229,7 @@ namespace pxsim.basic {
             clearScreen();
             pause(interval * 5);
         } else {
-            if (s.length == 1) showLeds(createImageFromString(s + " "), interval * 5)
+            if (s.length == 1) showLeds(createImageFromString(s), 0);
             else ImageMethods.scrollImage(createImageFromString(s + " "), 1, interval);
         }
     }

sim/state/misc.ts

@@ -119,6 +119,9 @@ namespace pxsim.pins {
     export function getPinAddress(name: number) {
         return getPin(name)
     }
+
+    export function setEvents(name: number, event: number) {
+    }
 }
 
 namespace pxsim.devices {

sim/visuals/neopixel.ts

@@ -179,6 +179,7 @@ namespace pxsim.visuals {
             .sim-neopixel-canvas-parent:hover {
                 transform-origin: center;
                 transform: scale(4) translateY(-60px);
+                -moz-transform: scale(4) translateY(-220px);
             }
             .sim-neopixel-canvas .hidden {
                 visibility:hidden;

targetconfig.json

@@ -5,7 +5,8 @@
             "microbit-foundation"
         ],
         "approvedRepos": [
-            "CoderDojoOlney/pxt-olney"
+            "CoderDojoOlney/pxt-olney",
+            "PaulDFoster/pxt-microbit-GY521"
         ]
     }
 }

theme/site/elements/loader.overrides

@@ -1,56 +1,3 @@
 /*******************************
          Site Overrides
 *******************************/
-
-.ui.loader:before {
-   border: none;
-   border-radius: 0px;
-   box-shadow: none;
-}
-
-.ui.loader:after {
-   border: none;
-   box-shadow: none;
-   border-radius: 0px;
-   margin: 40px auto;
-   background: transparent data-uri("static/loader.svg") no-repeat center center;
-   background-size: 100%;
-  -webkit-animation: loader-pxt @loaderSpeed infinite ease-in-out;
-  animation: loader-pxt @loaderSpeed infinite ease-in-out;
-}
-
-@-webkit-keyframes loader-pxt {
-  0% {
-    -webkit-transform: perspective(160px) rotateX(0deg) rotateY(0deg);
-            transform: perspective(160px) rotateX(0deg) rotateY(0deg); 
-            opacity: 0}
-  15% {
-    -webkit-transform: perspective(160px) rotateX(0deg) rotateY(-@loaderAngle);
-            transform: perspective(160px) rotateX(0deg) rotateY(-@loaderAngle); }
-  50% {
-    -webkit-transform: perspective(160px) rotateX(0deg) rotateY(@loaderAngle);
-            transform: perspective(160px) rotateX(0deg) rotateY(@loaderAngle); 
-            opacity: 1}
-  100% {
-    -webkit-transform: perspective(160px) rotateX(0deg) rotateY(0deg);
-            transform: perspective(160px) rotateX(0deg) rotateY(0deg); 
-            opacity: 0}
-}
-
-@keyframes loader-pxt {
-  0% {
-    -webkit-transform: perspective(160px) rotateX(0deg) rotateY(0deg);
-            transform: perspective(160px) rotateX(0deg) rotateY(0deg); 
-            opacity: 0}
-  15% {
-    -webkit-transform: perspective(160px) rotateX(0deg) rotateY(-10deg);
-            transform: perspective(160px) rotateX(0deg) rotateY(-10deg); }
-  50% {
-    -webkit-transform: perspective(160px) rotateX(0deg) rotateY(10deg);
-            transform: perspective(160px) rotateX(0deg) rotateY(10deg);
-            opacity: 1}
-  100% {
-    -webkit-transform: perspective(160px) rotateX(0deg) rotateY(0deg);
-            transform: perspective(160px) rotateX(0deg) rotateY(0deg); 
-            opacity: 0}
-}

theme/site/elements/loader.variables

@@ -1,8 +1,3 @@
 /*******************************
     User Variable Overrides
 *******************************/
-
-@loaderSpeed: 2s;
-@loaderAngle: 5deg;
-
-@large   : 200px;

theme/style.less

@@ -1,5 +1,5 @@
 /* Import all components */
-@import 'semantic';
+@import 'pxtsemantic';
 @import 'pxt';
 @import 'themes/default/globals/site.variables';
 @import 'themes/pxt/globals/site.variables';
@@ -29,15 +29,23 @@
     &:extend(.orange all);
 }
 
+.ui.button.editortools-btn {
+    &:extend(.blue all);
+}
+
 #filelist, #editortools {
     background: #fff url(https://az742082.vo.msecnd.net/pub/psopafpj) 0 0 repeat !important;
 }
 
+#downloadArea {
+    background: transparent !important;
+}
+
 /*******************************
              Blockly
 *******************************/
 
-.blocklyTreeRow {
+div.blocklyTreeRow {
     border-bottom: 1px solid #ecf0f1 !important;
     margin-bottom: 0px !important;
 
@@ -48,7 +56,7 @@
 }
 
 /* Blockly toolbox font size same as the page font */
-.blocklyTreeLabel {
+span.blocklyTreeLabel {
     font-family: @pageFont !important;
     font-weight: 200;
 }