pxt-ev3/libs/core/output.ts

enum Output {
    //% block="A"
    A = 0x01,
    //% block="B"
    B = 0x02,
    //% block="C"
    C = 0x04,
    //% block="D"
    D = 0x08,
    //% block="B+C"
    BC = Output.B | Output.C,
    //% block="A+B"
    AB = Output.A | Output.B,
    //% block="C+D"
    CD = Output.C | Output.D,
    //% block="A+D"
    AD = Output.A | Output.D,
    //% block="All"
    ALL = 0x0f
}

enum OutputType {
    None = 0,
    Tacho = 7,
    MiniTacho = 8,
}

enum MoveUnit {
    //% block="rotations"
    Rotations,
    //% block="degrees"
    Degrees,
    //% block="seconds"
    Seconds,
    //% block="milliseconds"
    MilliSeconds
}

namespace motors {
    let pwmMM: MMap
    let motorMM: MMap

    const enum MotorDataOff {
        TachoCounts = 0, // int32
        Speed = 4, // int8
        Padding = 5, // int8[3]
        TachoSensor = 8, // int32
        Size = 12
    }

    function init() {
        if (pwmMM) return
        pwmMM = control.mmap("/dev/lms_pwm", 0, 0)
        if (!pwmMM) control.fail("no PWM file")
        motorMM = control.mmap("/dev/lms_motor", MotorDataOff.Size * DAL.NUM_OUTPUTS, 0)
        if (!motorMM) control.fail("no motor file")

        resetAllMotors()

        const buf = output.createBuffer(1)
        buf[0] = DAL.opProgramStart
        writePWM(buf)
    }

    /**
     * Sends a command to the motors device
     * @param buf the command buffer
     */
    //%
    export function writePWM(buf: Buffer): void {
        init()
        pwmMM.write(buf)
    }

    /**
     * Sends and receives a message from the motors device
     * @param buf message buffer
     */
    //%
    export function readPWM(buf: Buffer): void {
        init()
        pwmMM.read(buf);
    }

    /**
     * Allocates a message buffer
     * @param out ports
     * @param cmd command id
     * @param addSize required additional bytes
     */
    //%
    export function mkCmd(out: Output, cmd: number, addSize: number) {
        const b = output.createBuffer(2 + addSize)
        b.setNumber(NumberFormat.UInt8LE, 0, cmd)
        b.setNumber(NumberFormat.UInt8LE, 1, out)
        return b
    }

    export function outputToName(out: Output): string {
        let r = "";
        for (let i = 0; i < DAL.NUM_OUTPUTS; ++i) {
            if (out & (1 << i)) {
                if (r.length > 0) r += "+";
                r += "ABCD"[i];
            }
        }
        return r;
    }

    /**
     * Stops all motors
     */
    //% blockId=motorStopAll block="stop all motors"
    //% weight=1
    //% group="Move"
    //% help=motors/stop-all
    export function stopAll() {
        const b = mkCmd(Output.ALL, DAL.opOutputStop, 0)
        writePWM(b)
    }

    /**
     * Resets all motors
     */
    //% group="Move"
    export function resetAllMotors() {
        reset(Output.ALL)
    }

    //% fixedInstances
    export class MotorBase extends control.Component {
        protected _port: Output;
        protected _portName: string;
        protected _brake: boolean;
        private _pauseOnRun: boolean;
        private _initialized: boolean;
        private _init: () => void;
        private _run: (speed: number) => void;
        private _move: (steps: boolean, stepsOrTime: number, speed: number) => void;

        constructor(port: Output, init: () => void, run: (speed: number) => void, move: (steps: boolean, stepsOrTime: number, speed: number) => void) {
            super();
            this._port = port;
            this._portName = outputToName(this._port);
            this._brake = false;
            this._pauseOnRun = true;
            this._initialized = false;
            this._init = init;
            this._run = run;
            this._move = move;
        }

        /**
         * Lazy initialization code
         */
        protected init() {
            if (!this._initialized) {
                this._initialized = true;
                this._init();
            }
        }

        /**
         * Sets the automatic brake on or off when the motor is off
         * @param brake a value indicating if the motor should break when off
         */
        //% blockId=outputMotorSetBrakeMode block="set %motor|brake %brake=toggleOnOff"
        //% motor.fieldEditor="motors"
        //% weight=60 blockGap=8
        //% group="Properties"
        //% help=motors/motor/set-brake
        setBrake(brake: boolean) {
            this.init();
            this._brake = brake;
        }

        /**
         * Indicates to pause while a motor moves for a given distance or duration.
         * @param value true to pause; false to continue the program execution
         */
        //% blockId=outputMotorSetPauseMode block="set %motor|pause on run %brake=toggleOnOff"
        //% motor.fieldEditor="motors"
        //% weight=60 blockGap=8
        //% group="Properties"
        setPauseOnRun(value: boolean) {
            this.init();
            this._pauseOnRun = value;
        }

        /** 
         * Inverts the motor polarity
        */
        //% blockId=motorSetInverted block="set %motor|inverted %reversed=toggleOnOff"
        //% motor.fieldEditor="motors"
        //% weight=59 blockGap=8
        //% group="Properties"
        //% help=motors/motor/set-inverted
        setInverted(inverted: boolean) {
            this.init();
            const b = mkCmd(this._port, DAL.opOutputPolarity, 1)
            b.setNumber(NumberFormat.Int8LE, 2, inverted ? 0 : 1);
            writePWM(b)
        }

        /**
         * Stops the motor(s).
         */
        //% weight=6 blockGap=8
        //% group="Move"
        //% help=motors/motor/stop
        //% blockId=motorStop block="stop %motors|"
        //% motors.fieldEditor="motors"
        stop() {
            this.init();
            stop(this._port, this._brake);
            this.settle();
        }

        protected settle() {
            // if we've recently completed a motor command with brake
            // allow 500ms for robot to settle
            if (this._brake)
                pause(500);
        }

        protected pauseOnRun(stepsOrTime: number) {
            if (stepsOrTime && this._pauseOnRun) {
                // wait till motor is done with this work
                this.pauseUntilReady();
                // allow robot to settle
                this.settle();
            }
        }

        /**
         * Resets the motor(s).
         */
        //% weight=5
        //% group="Move"
        //% help=motors/motor/reset
        //% blockId=motorReset block="reset %motors|"
        //% motors.fieldEditor="motors"
        reset() {
            this.init();
            reset(this._port);
        }

        /**
         * Runs the motor at a given speed for limited time or distance.
         * @param speed the speed from ``100`` full forward to ``-100`` full backward, eg: 50
         * @param value (optional) measured distance or rotation
         * @param unit (optional) unit of the value
         */
        //% blockId=motorRun block="run %motor at %speed=motorSpeedPicker|\\%||for %value %unit"
        //% weight=100 blockGap=8
        //% group="Move"
        //% motor.fieldEditor="motors"
        //% expandableArgumentMode=toggle
        //% help=motors/motor/run
        run(speed: number, value: number = 0, unit: MoveUnit = MoveUnit.MilliSeconds) {
            this.init();
            speed = Math.clamp(-100, 100, speed >> 0);
            // stop if speed is 0
            if (!speed) {
                this.stop();
                return;
            }
            // special: 0 is infinity
            if (value == 0) {
                this._run(speed);
                return;
            }
            // timed motor moves
            let useSteps: boolean;
            let stepsOrTime: number;
            switch (unit) {
                case MoveUnit.Rotations:
                    stepsOrTime = (value * 360) >> 0;
                    useSteps = true;
                    break;
                case MoveUnit.Degrees:
                    stepsOrTime = value >> 0;
                    useSteps = true;
                    break;
                case MoveUnit.Seconds:
                    stepsOrTime = (value * 1000) >> 0;
                    useSteps = false;
                    break;
                default:
                    stepsOrTime = value;
                    useSteps = false;
                    break;
            }

            this._move(useSteps, stepsOrTime, speed);
            this.pauseOnRun(stepsOrTime);
        }

        /**
         * Returns a value indicating if the motor is still running a previous command.
         */
        //% group="Sensors"
        isReady(): boolean {
            this.init();
            const buf = mkCmd(this._port, DAL.opOutputTest, 2);
            readPWM(buf)
            const flags = buf.getNumber(NumberFormat.UInt8LE, 2);
            return (~flags & this._port) == this._port;
        }

        /**
         * Pauses the execution until the previous command finished.
         * @param timeOut optional maximum pausing time in milliseconds
         */
        //% blockId=motorPauseUntilRead block="pause until %motor|ready"
        //% motor.fieldEditor="motors"
        //% weight=90
        //% group="Move"
        pauseUntilReady(timeOut?: number) {
            pauseUntil(() => this.isReady(), timeOut);
        }

        protected setOutputType(large: boolean) {
            /*
            Instruction opOutput_Set_Type (LAYER, NO, TYPE) 
            Opcode 0xA1 Arguments (Data8) LAYER – Specify chain layer number [0 - 3]  
            (Data8) NO – Port number [0 - 3]  
            (Data8) TYPE – Output device type,  (0x07: Large motor, Medium motor = 0x08) Dispatch status Unchanged 
            Description This function enables specifying the output device type
            */
            for (let i = 0; i < DAL.NUM_OUTPUTS; ++i) {
                if (this._port & (1 << i)) {
                    const b = mkCmd(i, DAL.opOutputSetType, 1)
                    b.setNumber(NumberFormat.Int8LE, 2, large ? 0x07 : 0x08)
                    writePWM(b)
                }
            }
        }
    }

    //% fixedInstances
    export class Motor extends MotorBase {
        private _large: boolean;
        private _regulated: boolean;

        constructor(port: Output, large: boolean) {
            super(port, () => this.__init(), (speed) => this.__setSpeed(speed), (steps, stepsOrTime, speed) => this.__move(steps, stepsOrTime, speed));
            this._large = large;
            this._regulated = true;
            this.markUsed();
        }

        markUsed() {
            motors.__motorUsed(this._port, this._large);
        }

        private __init() {
            this.setOutputType(this._large);
        }

        private __setSpeed(speed: number) {
            const b = mkCmd(this._port, this._regulated ? DAL.opOutputSpeed : DAL.opOutputPower, 1)
            b.setNumber(NumberFormat.Int8LE, 2, speed)
            writePWM(b)
            if (speed) {
                writePWM(mkCmd(this._port, DAL.opOutputStart, 0))
            }
        }

        private __move(steps: boolean, stepsOrTime: number, speed: number) {
            step(this._port, {
                useSteps: steps,
                step1: 0,
                step2: stepsOrTime,
                step3: 0,
                speed: this._regulated ? speed : undefined,
                power: this._regulated ? undefined : speed,
                useBrake: this._brake
            })
        }

        /**
         * Indicates if the motor speed should be regulated. Default is true.
         * @param value true for regulated motor
         */
        //% blockId=outputMotorSetRegulated block="set %motor|regulated %value=toggleOnOff"
        //% motor.fieldEditor="motors"
        //% weight=58
        //% group="Properties"
        //% help=motors/motor/set-regulated
        setRegulated(value: boolean) {
            this._regulated = value;
        }

        /**
         * Gets motor actual speed.
         * @param motor the port which connects to the motor
         */
        //% blockId=motorSpeed block="%motor|speed"
        //% motor.fieldEditor="motors"
        //% weight=72 
        //% blockGap=8
        //% group="Counters"
        //% help=motors/motor/speed
        speed(): number {
            this.init();
            return getMotorData(this._port).actualSpeed;
        }

        /**
         * Gets motor angle.
         * @param motor the port which connects to the motor
         */
        //% blockId=motorAngle block="%motor|angle"
        //% motor.fieldEditor="motors"
        //% weight=70
        //% blockGap=8
        //% group="Counters"
        //% help=motors/motor/angle
        angle(): number {
            this.init();
            return getMotorData(this._port).count;
        }

        /**
         * Clears the motor count
         */
        //% blockId=motorClearCount block="clear %motor|counters"
        //% motor.fieldEditor="motors"
        //% weight=68
        //% blockGap=8
        //% group="Counters"
        //% help=motors/motor/clear-counts
        clearCounts() {
            this.init();
            const b = mkCmd(this._port, DAL.opOutputClearCount, 0)
            writePWM(b)
            for (let i = 0; i < DAL.NUM_OUTPUTS; ++i) {
                if (this._port & (1 << i)) {
                    motorMM.setNumber(NumberFormat.Int32LE, i * MotorDataOff.Size + MotorDataOff.TachoSensor, 0)
                }
            }
        }

        /**
         * Returns the status of the motor
         */
        //%
        toString(): string {
            return `${this._large ? "" : "M"}${this._portName} ${this.speed()}% ${this.angle()}>`;
        }
    }

    //% whenUsed fixedInstance block="large motor A" jres=icons.portA
    export const largeA = new Motor(Output.A, true);

    //% whenUsed fixedInstance block="large motor B" jres=icons.portB
    export const largeB = new Motor(Output.B, true);

    //% whenUsed fixedInstance block="large motor C" jres=icons.portC
    export const largeC = new Motor(Output.C, true);

    //% whenUsed fixedInstance block="large motor D" jres=icons.portD
    export const largeD = new Motor(Output.D, true);

    //% whenUsed fixedInstance block="medium motor A" jres=icons.portA
    export const mediumA = new Motor(Output.A, false);

    //% whenUsed fixedInstance block="medium motor B" jres=icons.portB
    export const mediumB = new Motor(Output.B, false);

    //% whenUsed fixedInstance block="medium motor C" jres=icons.portC
    export const mediumC = new Motor(Output.C, false);

    //% whenUsed fixedInstance block="medium motor D" jres=icons.portD
    export const mediumD = new Motor(Output.D, false);

    //% fixedInstances
    export class SynchedMotorPair extends MotorBase {

        constructor(ports: Output) {
            super(ports, () => this.__init(), (speed) => this.__setSpeed(speed), (steps, stepsOrTime, speed) => this.__move(steps, stepsOrTime, speed));
            this.markUsed();
        }

        markUsed() {
            motors.__motorUsed(this._port, true);
        }

        private __init() {
            this.setOutputType(true);
        }

        private __setSpeed(speed: number) {
            syncMotors(this._port, {
                speed: speed,
                turnRatio: 0, // same speed
                useBrake: !!this._brake
            })
        }

        private __move(steps: boolean, stepsOrTime: number, speed: number) {
            syncMotors(this._port, {
                useSteps: steps,
                speed: speed,
                turnRatio: 0, // same speed
                stepsOrTime: stepsOrTime,
                useBrake: this._brake
            });
        }

        /**
         * The Move Tank block can make a robot drive forward, backward, turn, or stop. 
         * Use the Move Tank block for robot vehicles that have two Large Motors, 
         * with one motor driving the left side of the vehicle and the other the right side. 
         * You can make the two motors go at different speeds or in different directions 
         * to make your robot turn.
         * @param speedLeft the speed on the left motor, eg: 50
         * @param speedRight the speed on the right motor, eg: 50
         * @param value (optional) move duration or rotation
         * @param unit (optional) unit of the value
         */
        //% blockId=motorPairTank block="tank **motors** %motors %speedLeft=motorSpeedPicker|\\% %speedRight=motorSpeedPicker|\\%||for %value %unit"
        //% motors.fieldEditor="ports"
        //% weight=96 blockGap=8
        //% inlineInputMode=inline
        //% group="Move"
        //% expandableArgumentMode=toggle
        //% help=motors/synced/tank
        tank(speedLeft: number, speedRight: number, value: number = 0, unit: MoveUnit = MoveUnit.MilliSeconds) {
            this.init();

            speedLeft = Math.clamp(-100, 100, speedLeft >> 0);
            speedRight = Math.clamp(-100, 100, speedRight >> 0);

            const speed = Math.abs(speedLeft) > Math.abs(speedRight) ? speedLeft : speedRight;
            const turnRatio = speedLeft == speed
                ? (100 - speedRight / speedLeft * 100)
                : (speedLeft / speedRight * 100 - 100);

            this.steer(turnRatio, speed, value, unit);
        }

        /**
         * Turns the motor and the follower motor by a number of rotations
         * @param turnRatio the ratio of power sent to the follower motor, from ``-200`` to ``200``, eg: 0
         * @param speed the speed from ``100`` full forward to ``-100`` full backward, eg: 50
         * @param value (optional) move duration or rotation
         * @param unit (optional) unit of the value
         */
        //% blockId=motorPairSteer block="steer **motors** %chassis turn ratio %turnRatio=motorTurnRatioPicker speed %speed=motorSpeedPicker|\\%||for %value %unit"
        //% chassis.fieldEditor="ports"
        //% weight=95
        //% turnRatio.min=-200 turnRatio=200
        //% inlineInputMode=inline
        //% group="Move"
        //% expandableArgumentMode=toggle
        //% help=motors/synced/steer
        steer(turnRatio: number, speed: number, value: number = 0, unit: MoveUnit = MoveUnit.MilliSeconds) {
            this.init();
            speed = Math.clamp(-100, 100, speed >> 0);
            if (!speed) {
                stop(this._port, this._brake);
                return;
            }

            turnRatio = Math.clamp(-200, 200, turnRatio >> 0);
            let useSteps: boolean;
            let stepsOrTime: number;
            switch (unit) {
                case MoveUnit.Rotations:
                    stepsOrTime = (value * 360) >> 0;
                    useSteps = true;
                    break;
                case MoveUnit.Degrees:
                    stepsOrTime = value >> 0;
                    useSteps = true;
                    break;
                case MoveUnit.Seconds:
                    stepsOrTime = (value * 1000) >> 0;
                    useSteps = false;
                    break;
                default:
                    stepsOrTime = value >> 0;
                    useSteps = false;
                    break;
            }

            syncMotors(this._port, {
                useSteps: useSteps,
                speed: speed,
                turnRatio: turnRatio,
                stepsOrTime: stepsOrTime,
                useBrake: this._brake
            });

            this.pauseOnRun(stepsOrTime);
        }

        /**
         * Returns the name(s) of the motor
         */
        //%
        toString(): string {
            this.init();

            let r = outputToName(this._port);
            for (let i = 0; i < DAL.NUM_OUTPUTS; ++i) {
                if (this._port & (1 << i)) {
                    r += ` ${getMotorData(1 << i).actualSpeed}%`
                }
            }
            return r;
        }
    }

    //% whenUsed fixedInstance block="B+C" jres=icons.portBC
    export const largeBC = new SynchedMotorPair(Output.BC);

    //% whenUsed fixedInstance block="A+D" jres=icons.portAD
    export const largeAD = new SynchedMotorPair(Output.AD);

    //% whenUsed fixedInstance block="A+B" jres=icons.portAB
    export const largeAB = new SynchedMotorPair(Output.AB);

    //% whenUsed fixedInstance block="C+D" jres=icons.portCD
    export const largeCD = new SynchedMotorPair(Output.CD);

    function reset(out: Output) {
        writePWM(mkCmd(out, DAL.opOutputReset, 0))
        writePWM(mkCmd(out, DAL.opOutputClearCount, 0))
    }

    function outOffset(out: Output) {
        for (let i = 0; i < DAL.NUM_OUTPUTS; ++i) {
            if (out & (1 << i))
                return i * MotorDataOff.Size
        }
        return 0
    }

    export interface MotorData {
        actualSpeed: number; // -100..+100
        tachoCount: number;
        count: number;
    }

    // only a single output at a time
    function getMotorData(out: Output): MotorData {
        init()
        const buf = motorMM.slice(outOffset(out), MotorDataOff.Size)
        return {
            actualSpeed: buf.getNumber(NumberFormat.Int8LE, MotorDataOff.Speed),
            tachoCount: buf.getNumber(NumberFormat.Int32LE, MotorDataOff.TachoCounts),
            count: buf.getNumber(NumberFormat.Int32LE, MotorDataOff.TachoSensor),
        }
    }

    export function getAllMotorData(): MotorData[] {
        init();
        return [Output.A, Output.B, Output.C, Output.D].map(out => getMotorData(out));
    }

    interface SyncOptions {
        useSteps?: boolean;
        speed: number;
        turnRatio: number;
        stepsOrTime?: number;
        useBrake?: boolean;
    }

    function syncMotors(out: Output, opts: SyncOptions) {
        const cmd = opts.useSteps ? DAL.opOutputStepSync : DAL.opOutputTimeSync;
        const b = mkCmd(out, cmd, 11);
        const speed = Math.clamp(-100, 100, opts.speed);
        const turnRatio = Math.clamp(-200, 200, opts.turnRatio);

        b.setNumber(NumberFormat.Int8LE, 2, speed)
        // note that b[3] is padding
        b.setNumber(NumberFormat.Int16LE, 4 + 4 * 0, turnRatio)
        // b[6], b[7] is padding
        b.setNumber(NumberFormat.Int32LE, 4 + 4 * 1, opts.stepsOrTime || 0)
        b.setNumber(NumberFormat.Int8LE, 4 + 4 * 2, opts.useBrake ? 1 : 0)
        writePWM(b)
    }

    interface StepOptions {
        power?: number;
        speed?: number; // either speed or power has to be present
        step1: number;
        step2: number;
        step3: number;
        useSteps?: boolean; // otherwise use milliseconds
        useBrake?: boolean;
    }

    function start(out: Output) {
        const b = mkCmd(out, DAL.opOutputStart, 0)
        writePWM(b);
    }

    function stop(out: Output, brake: boolean) {
        const b = mkCmd(out, DAL.opOutputStop, 1)
        b.setNumber(NumberFormat.UInt8LE, 2, brake ? 1 : 0)
        writePWM(b);
    }

    function step(out: Output, opts: StepOptions) {
        let op = opts.useSteps ? DAL.opOutputStepSpeed : DAL.opOutputTimeSpeed
        let speed = opts.speed
        if (speed == null) {
            speed = opts.power
            op = opts.useSteps ? DAL.opOutputStepPower : DAL.opOutputTimePower
            if (speed == null)
                return
        }
        speed = Math.clamp(-100, 100, speed)

        let b = mkCmd(out, op, 15)
        b.setNumber(NumberFormat.Int8LE, 2, speed)
        // note that b[3] is padding
        b.setNumber(NumberFormat.Int32LE, 4 + 4 * 0, opts.step1)
        b.setNumber(NumberFormat.Int32LE, 4 + 4 * 1, opts.step2)
        b.setNumber(NumberFormat.Int32LE, 4 + 4 * 2, opts.step3)
        b.setNumber(NumberFormat.Int8LE, 4 + 4 * 3, opts.useBrake ? 1 : 0)
        writePWM(b)
    }

    const types = [0, 0, 0, 0]
    export function setType(out: Output, type: OutputType) {
        let b = mkCmd(out, DAL.opOutputSetType, 3)
        for (let i = 0; i < 4; ++i) {
            if (out & (1 << i)) {
                types[i] = type
            }
            b.setNumber(NumberFormat.UInt8LE, i + 1, types[i])
        }
        writePWM(b)
    }
}


interface Buffer {
    [index: number]: number;
    // rest defined in buffer.cpp
}